Troubleshoot cash drawer issues
ZTZenoti Docs Team Updated June 18, 2026 2 min readGuide
The cash drawer in Zenoti Point of Sale (POS) operates through the receipt printer. Most drawer problems are caused by the printer connection or configuration rather than the drawer itself — so start there.
Disclaimer: Hardware-cabling and printer steps below involve third-party devices; Zenoti is not responsible for the content of external sites or vendor manuals.
On this page
- Common issues
- Troubleshoot a non-responsive drawer
- Open the drawer manually in Zenoti
- Best practices
Common issues
- Drawer does not open automatically. If it needs a physical key or does not open after a receipt prints, the issue is likely the connection or receipt-printer settings. Ensure the drawer cable is connected to the printer's cash-drawer port (RJ-11/RJ-12), not directly to the computer or a USB trigger.
- Drawer does not respond to the Pop Drawer button. The Pop Drawer feature works only if the drawer is physically unlocked. Unlock it with its key first.
- Drawer does not open during register operations or printing. Confirm the receipt printer is recognized and working, check for printer error lights, and restart the computer and printer to clear minor connectivity issues.
- Negative or unexpected cash amounts in the register. This usually happens when cash is collected before the opening amount is recorded. Save the correct opening till amount with appropriate notes.
Troubleshoot a non-responsive drawer
- Check for error messages on Zenoti or the receipt-printer screen and resolve them.
- Run a printer self-test to confirm it is operational; reinstall or update printer drivers if needed. Power-cycle the printer (off for five seconds, then on).
- Ensure the drawer cable is securely connected to the correct port on the printer.
- Restart the receipt printer, cash drawer, and connected computer.
- Print a receipt or simulate an invoice closure to trigger the kick signal that opens the drawer.
Note: If the drawer still does not open after these steps, inspect it for debris or mechanical damage.
Open the drawer manually in Zenoti
To open the drawer without printing a receipt:
- From the Appointment view: click Manage Register > Pop Drawer.
- From the Queue view: go to Actions > Manage Register, then select Pop Drawer.
Best practices
- Keep the receipt printer correctly configured and connected to the cash drawer at all times.
- Keep the cash-drawer key accessible for situations that require physical access.
- Periodically inspect the drawer's opening and closing mechanism to prevent jamming.
Was this article helpful?
Your feedback helps us improve our documentation.