ZenotiHelp

Enable SmartBot as a Lead Source

ZTZenoti Docs Team Updated July 28, 2026 3 min readGuide

You can configure AI Lead Manager to capture leads that originate from SmartBot interactions. When SmartBot is enabled as a lead source at the center level, any guest who engages with SmartBot and meets the capture criteria is automatically entered into the lead pipeline through the standard lead capture process.

Audience: Center administrators and lead management staff who configure lead sources for their center.


On this page


Before you begin

  • SmartBot must be configured for your center before the SmartBot toggle appears in Manage sources. If SmartBot is not yet set up for your center, the toggle will not be visible. Contact your administrator to configure SmartBot for the center first.

  • AI Lead Manager must be active for your organization and center.

  • You need the following permission:

    Permission: Edit on the Lead Settings security object — required to modify lead source configuration. Admin path: Lead Management > AI Lead Manager > Lead settings > Lead sources

Steps

Enable SmartBot as a lead source

  1. Navigate to Lead Management > AI Lead Manager > Lead settings.

  2. Select Lead sources from the settings menu.

  3. Select Lead configuration.

  4. Select Manage sources.

  5. Locate the SmartBot entry in the sources list.

    Note: The SmartBot toggle appears only when SmartBot is configured for the center. If you do not see it, SmartBot has not been set up for this center. See Before you begin for details.

  6. Turn on the toggle next to SmartBot.

  7. Select Save.

    Once saved, the center begins capturing leads from SmartBot interactions through the standard lead capture pipeline. New leads originating from SmartBot appear in All leads with their lead source recorded as SmartBot.

Worked example: Your center has SmartBot active on the Webstore. A guest asks SmartBot about a facial treatment but does not book. With the SmartBot toggle enabled and saved, that interaction is captured as a new lead assigned to the configured initial lead stage, with Source set to SmartBot, ready for follow-up by your team.

Tips

  • After enabling SmartBot as a lead source, verify that new SmartBot-originated leads are appearing in Lead Management > AI Lead Manager > All leads by filtering on Source: SmartBot.
  • If your center uses automation rules or workflows, consider setting up a rule that triggers when a lead is created with the SmartBot source — for example, to automatically assign the lead to a specific team member or send an immediate follow-up message.
  • The SmartBot toggle is center-specific. If your organization operates multiple centers, you must enable the toggle separately for each center where SmartBot is configured and where you want leads captured.
  • Lead sources can be set to inactive without being deleted, preserving historical records. If you need to temporarily stop capturing SmartBot leads, turn off the toggle and save rather than deleting the source.

Troubleshooting

Problem Resolution
The SmartBot toggle does not appear in Manage sources SmartBot is not configured for this center. Contact your administrator to complete SmartBot setup for the center. The toggle only appears after SmartBot is configured.
The toggle is visible but cannot be turned on Verify you have the Edit permission on the Lead Settings security object. If the toggle is greyed out, you may have view-only access.
SmartBot leads are not appearing in All leads after enabling the toggle Confirm the toggle was saved after being turned on. Navigate back to Lead Management > AI Lead Manager > Lead settings > Lead sources > Lead configuration > Manage sources and verify the SmartBot toggle is still in the on position.
Was this article helpful?
Your feedback helps us improve our documentation.