ZenotiHelp

Photo Manager Usage Dashboard

ZTZenoti Docs Team Updated September 27, 2026 7 min readGuide

The Photo Manager Usage Dashboard gives organization owners and managers a centralized view of photo capture quality, center-level adoption, and — when enabled — AI-generated simulation activity. Use it to identify which centers are capturing photos with guidelines, how consistently staff apply file tags, and where guided capture rates need attention.

Audience: Organization owners and center managers who oversee Photo Manager rollout and usage quality.


On this page


Before you begin

  • Your organization must have Photo Manager enabled. If Photo Manager is not active for your organization, the dashboard is not accessible.

  • You need the following permission:

    Permission: Gallery View — Required to view the Photo Manager Usage Dashboard. Admin path: Configuration icon > Security roles > [your role] > Photo Management > Gallery View

  • To view the Treatment Visualizer section, either the Enable AI Workforce Visualizer organization setting or the Enable AI Photo Management organization setting must be active. If neither is enabled, that section does not appear on the dashboard.

  • If you do not have the Gallery View permission, the dashboard shows an access-denied message instead of dashboard content.


Steps

Open the dashboard

  1. In Zenoti, select the AI Photo Manager icon or navigate to the Photo Manager section from your main navigation.

  2. Select Usage Dashboard.

    The dashboard subtitle reads: "Capture quality, documentation coverage, outcome activity and rollout status for the selected period."

    Note: If you see the message "You do not have permission to view the Photo Manager dashboard," contact your administrator to request the Gallery View permission under Photo Management.

Set the period and location filters

Use the filter controls at the top of the dashboard to scope the data before reviewing any section.

  1. Under View by, select either Month or Quarter.

  2. Select the Year.

  3. Select the Month (1–12) or Quarter (1–4) depending on the period type you chose.

  4. Under Location, select a zone or center from the Search zones and centers field, or leave it set to All locations to view organization-wide data.

  5. To clear all applied filters, select Reset filters.

    Note: The Monthly capture volume chart always reflects the selected year, regardless of which month or quarter is active in the other filters.

Review capture quality

The Capture quality section summarizes how photos are captured and tagged during the selected period.

  1. Review the Monthly capture volume stacked-bar chart.

    • The chart compares photos captured at live centers versus off centers for each month of the selected year.
    • Use this chart to identify months with low capture volume or to spot centers that have not yet gone live with Photo Manager.
  2. Review the Guided capture rate metric.

    • This metric shows the number and percentage of photos captured using an anatomical guideline versus photos captured freeform (without a guideline).
    • A higher guided capture rate indicates that staff are following structured photo sequences during capture.
    • If no photos were captured in the selected period, a descriptive message appears in place of the metric.
  3. Review additional metrics in this section such as tagging rates to understand how consistently staff apply file tags to captured photos.

Tip: A low guided capture rate may indicate that photo sequences are not yet assigned to services at some centers, or that staff need additional training on guided capture. See Assign photo sequences to services for setup guidance.

Review the center breakdown

The Center breakdown section shows adoption and quality rates by center in a tabular format. Each row represents one center.

The table contains the following columns:

Column What it shows
Center The name of the center
Zone The zone the center belongs to
Status Whether the center is live or off for Photo Manager
Photos Total photos captured at this center during the selected period
Guided % Percentage of photos captured using an anatomical guideline
In-app % Percentage of photos captured using the in-app camera (as opposed to uploaded files)
Tagged % Percentage of photos that have at least one file tag applied

Use the Location filter (described in Set the period and location filters) to narrow the table to a specific zone or center.

Tip: Sort or scan the table by Guided % and Tagged % to identify centers that need attention. Centers with low rates in both columns may benefit from a refresher on guided capture workflows and file tagging practices.

Review Treatment Visualizer activity

Availability: This section is visible only when the Enable AI Workforce Visualizer organization setting or the Enable AI Photo Management organization setting is enabled. If the section does not appear, neither feature has been activated for your organization.

The Treatment Visualizer section shows AI-generated simulations produced during consultations and which employees are running them.

  1. Review the total count of simulations generated during the selected period. The section subtitle reads: "Simulations generated during consultations, and the employees running them."

  2. Use the Job filter (with Search jobs... and All jobs options) to narrow results to a specific job role.

  3. Use the Employee filter (with Search employees... and All employees options) to focus on a specific employee.

  4. Review the per-employee breakdown table:

    Column What it shows
    Employee The employee's name
    Job The employee's job designation
    Center The center where the simulation was run
    Visualizations The number of AI-generated simulations the employee produced during the selected period

Understand the metrics

The following reference table explains the key metrics and their significance.

Metric Description Why it matters
Monthly capture volume Photos captured per month, split by live vs. off centers Identifies months or centers with low photo activity
Guided capture rate Percentage of photos taken against an anatomical guideline Higher rates indicate consistent use of structured photo sequences
In-app % Percentage of photos taken with the in-app camera Lower rates may indicate staff are uploading external images rather than capturing in the moment
Tagged % Percentage of captured photos with at least one file tag Supports search and filtering in the guest gallery and Global Gallery
Visualizations Count of AI-generated simulations per employee Measures adoption of the Treatment Visualizer add-on during consultations

Worked example: An organization with three centers filters the dashboard to Q1 of the current year at the organization level. The Guided % for Center A is 82%, for Center B is 34%, and for Center C is 0%. The manager investigates Center C and finds that photo sequences have not been assigned to any services there. After assigning sequences and training staff, the next quarter shows Center C at 61% guided capture rate.


Tips

  • Compare quarters to track adoption progress. Filter to Q1, then Q2, to compare whether guided capture rates and tagging rates are improving across centers as Photo Manager rolls out.
  • Use zone filters to delegate review. If your organization is divided into zones, filter by zone and share the view with the zone manager responsible for Photo Manager adoption in that area.
  • Check live vs. off center counts regularly. The monthly capture volume chart shows at a glance how many centers are active. Centers shown as "off" have not yet enabled Photo Manager — coordinate with those center managers to plan their go-live.
  • Cross-reference low guided rates with photo sequence setup. If a center shows a low guided capture rate, verify that photo sequences are assigned to its services. See Assign photo sequences to services.
  • Use the Treatment Visualizer breakdown to coach employees. The per-employee table identifies which staff are adopting simulations in consultations and which are not, enabling targeted coaching conversations.

Troubleshooting

Symptom Likely cause Resolution
The dashboard shows "You do not have permission to view the Photo Manager dashboard." Your security role does not include the Gallery View permission under Photo Management. Ask your administrator to grant the Gallery View permission. See Configure photo manager permissions.
The dashboard fails to load and shows a server error message. An unexpected server error occurred while loading dashboard data. Refresh the page. If the error persists, contact Zenoti Support.
The Treatment Visualizer section is not visible on the dashboard. Neither the Enable AI Workforce Visualizer nor the Enable AI Photo Management organization setting is enabled. Contact your Zenoti representative to enable one of these features for your organization.
The dashboard appears but shows no data for the selected period. No photos were captured or no centers were live during that period. Adjust the period filter to a range when Photo Manager was active, or verify that at least one center has Photo Manager enabled.
Filter selections produce an error or no results. An invalid combination of period type, year, period value, zone, or center was submitted. Ensure the period value matches the period type: months must be 1–12 and quarters must be 1–4. Verify the selected zone and center are valid for your organization.
The center breakdown table is empty. All centers are filtered out by the active location filter. Select Reset filters to return to All locations and confirm data is present at the organization level.

Was this article helpful?
Your feedback helps us improve our documentation.