ZenotiHelp

Review the Client Watchlist

ZTZenoti Docs Team Updated October 29, 2026 7 min readGuide

The Client Watchlist is your daily shortlist of guests to reach out to before they drift away. It ranks every guest in your organization by leaving risk so you can focus your outreach on the guests who need it most, starting at the top of the list.

Audience: Front desk staff, managers, and any employee with access to AI Retention Manager who handles guest retention outreach.

Before you begin

  • Onboarding must be complete and your organization's data must have finished processing. If the dashboard is still training, the watchlist will not be populated.
  • You must have access to AI Retention Manager, opened from the Guest menu in the Zenoti left navigation.

Permission: AI Retention Manager security object β€” View to open the dashboard and read the Client Watchlist. Edit is required to create target segments, refresh member lists, and send guests to AI Lead Manager. Admin path: Configuration > Security > Security roles > [your role] > AI Retention Manager

Steps

Open the Client Watchlist

  1. In the Zenoti left navigation, select Guest.
  2. Select AI Retention Manager from the menu. The dashboard opens to the Overview tab.
  3. Scroll down the Overview page to the Client watchlist section. The watchlist loads with the Critical band filter applied by default, sorted by Sort: Risk (high to low).

Note: Data in the Client Watchlist is near real time with a maximum delay of 24 hours. The guest list you see reflects your organization's most recently processed data.

Understand the watchlist columns

The Client Watchlist table displays the following columns for each guest:

Column What it shows
Guest name The name of the guest.
Leaving risk A band pill β€” Critical risk of churn, High risk of churn, Monitor, or Healthy β€” plus a percentage representing the probability of leaving.
Est. value missed Revenue estimated as missed since the guest's last service visit.
Value at risk Projected revenue at risk over the next 12 months if the guest does not return.
Last engagement The date of the guest's most recent engagement with your center.
Last outreach The name of the most recent outreach campaign sent to this guest, if one exists. Select the campaign name to open the Outreach history window for that guest.
Marked since The date the guest's current risk band was last updated.

Note: Marked since is a display column only β€” you cannot filter the watchlist by this date. To focus on recently re-banded guests, review the Marked since value alongside the Leaving risk band pill.

View outreach history for a guest

When a guest has been reached through a campaign launched from AI Retention Manager, the Last outreach column shows the campaign name as a selectable link.

  1. Locate a guest whose Last outreach column shows a campaign name.
  2. Select the campaign name. The Outreach history window opens.
  3. Review the list of campaigns launched for that guest. Each entry shows the campaign name, its launch date, and the channel β€” SMS or Email.
  4. Select the close (X) icon in the top-right corner of the window, or select anywhere outside it, to return to the watchlist.

Note: The Outreach history window shows campaigns launched from AI Retention Manager for that guest. It does not show whether a message was delivered or opened β€” delivery status is owned by Zenoti Core and is not surfaced here. If no campaigns have been launched for the guest, the window displays "No outreach launches recorded." Guests with no outreach history show "β€”" in the Last outreach column; selecting that cell opens nothing.

Filter by risk band

The band filter lets you narrow the list to guests in a specific leaving-risk group.

  1. At the top of the Client watchlist, locate the band filter row.

  2. Select one of the four band options:

    Band option Who it shows
    Critical Guests with the highest probability of leaving (default on load).
    High Guests at high risk of leaving.
    Monitor Guests showing early warning signals.
    Healthy Guests currently at low risk.
  3. The watchlist refreshes immediately to show only guests in the selected band.

Tip: Start every session with the Critical and High bands. These guests represent the most urgent outreach opportunities.

Filter by guest type

  1. Locate the Guest type filter near the band filter.

  2. Select one of the following options:

    • All guests β€” Shows all guests regardless of visit history. This is the default.
    • First time guests β€” Shows guests who have visited only once.
    • Existing guests β€” Shows guests with more than one visit.
  3. The watchlist updates to reflect your selection.

Filter by center

  1. Locate the center selector in the watchlist filter row.
  2. Select a specific center from your organization's list, or select All centers to view guests across every center.
  3. The watchlist updates to show only guests associated with the selected scope.

Search by guest name

  1. Select the search field (placeholder: Guest search) at the top of the watchlist.
  2. Type all or part of a guest's name.
  3. The list filters in real time to show only matching guests.
  4. To clear the search and return to the full filtered list, delete the text from the search field.

Note: The search applies within the currently active band, guest type, and center filters. If you cannot find a guest, check that the band and guest type filters are set to All guests and the correct band for that guest.

Change the sort order

By default, the watchlist sorts by Sort: Risk (high to low) β€” the guest with the highest probability of leaving appears first.

  1. Locate the sort control above the watchlist table.
  2. Select Sort: Risk (high to low) or Sort: Risk (low to high) to reverse the order.

Tip: Keep the default Sort: Risk (high to low) order during daily outreach sessions. The guest at the top of the list is the one most likely to stop visiting.

Page through the watchlist

The watchlist displays 15 guests per page.

  1. After reviewing the current page, use the page-number navigation at the bottom of the watchlist to move to the next page.
  2. Select a specific page number to jump directly to that position in the list.

Worked example: Your front desk manager opens the Client Watchlist on a Monday morning. She selects the Critical band, sets Guest type to Existing guests, and chooses her center from the center selector. The list shows 23 guests β€” she is on page 1 of 2, reviewing the top 15. The first guest shows a Leaving risk of Critical risk of churn at 91%, an Est. value missed of $340 since her last visit six weeks ago, and a Value at risk of $1,200 over the next 12 months. Marked since shows the date this guest entered the Critical band. The manager checks the Last outreach column β€” it shows a campaign name β€” and selects it to open the Outreach history window, which confirms an SMS campaign was launched two weeks ago. She notes the guest has not returned since and flags her for a follow-up before moving to page 2.

Tips

  • Work the top of the Critical band first. Guests at the top of Sort: Risk (high to low) have the highest probability of leaving and the most value at risk. Prioritize these before moving to the High band.
  • Check the Marked since column for newly banded guests. A guest who moved into Critical recently may not yet have received outreach. Compare Marked since with Last outreach to spot gaps quickly.
  • Use the center filter when managing a multi-center organization. Filtering to a single center lets location managers review their own guest lists without noise from other centers. Set it back to All centers for an organization-wide view.
  • Combine guest type and band filters for targeted outreach campaigns. Filtering to First time guests in the Critical band identifies new guests who visited once and are at immediate risk of not returning β€” a distinct outreach message from long-term guests.
  • Use the search field to look up a specific guest rather than paging through the full list. This is useful when a guest contacts you and you want to check their current risk band and value metrics before responding.

Troubleshooting

The watchlist shows "No guests found in this band" The active band filter may contain no guests at this time, or the center filter may be scoped to a center with no guests at that risk level. Select All centers and try a different band to confirm whether guests exist. If every band shows empty results and onboarding is complete, wait up to 24 hours for the latest data to process, then reload the page.

A guest I expect to see is not appearing in the watchlist The guest may be in a different band from the one currently selected. Set Guest type to All guests, set the band to each option in turn, and use the Guest search field to search for the guest's name. If the guest still does not appear, their data may not yet have been processed in the most recent update cycle β€” check back after the 24-hour maximum delay window.

The page shows "Something went wrong loading this view" This is an intermittent load error. Select Reload to refresh the view. If the error persists after reloading, check your network connection and try again in a few minutes. If the problem continues, contact your administrator.

The sort order is not changing when I select a different sort option Ensure you are clicking the sort control above the watchlist table, not the column headers. The watchlist supports Sort: Risk (high to low) and Sort: Risk (low to high) from the sort control. If the list does not update, try reloading the page.

The Est. value missed or Value at risk columns show no data These values are calculated from historical visit and spend data. If a guest has limited transaction history, these figures may not yet be available. The column will populate as more data is processed.

Was this article helpful?
Your feedback helps us improve our documentation.