AI Scribe Recording β Upload Progress Indicator Stages
After a recording stops, AI Scribe displays a segmented progress bar in the floating recording widget to show that your audio is being uploaded for processing. This article explains what each stage of the progress bar represents so you know what to expect while the upload completes.
Audience: Providers using AI Scribe on Zenoti Mobile App (ZMA) to record appointment sessions.
On this page
Before you begin
- This article covers recording on the Zenoti Mobile App (ZMA). For recording on Zenoti Web, see Record with AI Scribe on Zenoti Web.
- Your device must meet the minimum RAM requirements:
| Platform | Minimum RAM |
|---|---|
| Android (ZMA) | 4 GB or more |
| iOS (ZMA) | 4 GB or more |
| Zenoti Web | View-only β recording not supported |
- You must have an active AI Scribe license assigned to your account. Contact your administrator if you do not have access.
- Ensure your device has a stable network connection (Wi-Fi or cellular) before stopping a recording. A lost connection mid-upload can interrupt the process.
Permission: You need the AI Scribe user management permission to record sessions. Your administrator assigns this at Configuration > AI Scribe > AI Scribe - user access.
Steps
Stop a recording and watch the upload progress bar
- Complete your session recording in the ZMA floating recording widget.
- Tap the button to stop the recording.
- The floating widget transitions from the recording state to the upload state. A segmented progress bar appears and begins advancing through the upload stages described below.
- Wait for the progress bar to reach completion. Do not close the app or navigate away while the upload is in progress.
- When the bar reaches 100%, the upload is complete and AI Scribe begins processing your recording to generate charting notes.
Upload progress stages
Once you stop a recording, the progress bar advances through several stages. The table below describes what is happening at each stage.
| Stage | Approximate position | What is happening |
|---|---|---|
| Upload starts | 0% | The floating widget detects that recording has stopped and begins the upload sequence. |
| Preparing the upload | 10% | The app retrieves a secure upload address to use for transferring the audio file. |
| Transfer begins | 20% | The app starts sending the audio file to secure storage. |
| File transfer in progress | 20%β80% | Audio bytes are actively transmitted. Progress advances as data is sent. |
| Finalizing transfer | 80%β90% | The app confirms that all data has been sent and that the storage service has received the complete file. |
| Registering the recording | 90%β99% | The app notifies Zenoti that the upload is complete and the recording is ready for processing. |
| Upload complete | 100% | The upload has finished. AI Scribe begins generating your charting notes in the background. |
Note: The progress bar advances through stages sequentially. Network speed and file size affect how quickly each stage completes. The bar does not skip stages or move backward.
Tip: You do not need to keep the floating widget open after the upload reaches 100%. AI Scribe processes the recording on the server. You can check the status of your charting notes from the appointment record in Zenoti.
Worked example
A provider finishes a 45-minute facial consultation recording and taps stop. The floating widget immediately shows the progress bar at 0%. Within a few seconds it advances to 10% as the upload address is retrieved, then jumps to 20% as the file transfer starts. Over the next 30 seconds the bar moves steadily from 20% to 80% as the audio is sent. It briefly pauses at 80%β90% while the system confirms receipt, then moves to 99% as the recording is registered. The bar completes at 100% and the widget shows that the upload is finished. The provider navigates away; the charting notes appear in the appointment record within a few minutes.
Tips
- Stay connected throughout the upload. If your device loses network access between 20% and 80%, the file transfer may stall. Keep Wi-Fi or cellular active until the bar reaches 100%.
- Do not force-quit ZMA during the upload. Closing the app before the bar completes can interrupt the transfer. Allow the upload to finish, then navigate freely.
- Long recordings take longer to upload. A session recorded up to the 95-minute per-recording limit will produce a larger audio file. Allow extra time on slower connections. A cumulative total of up to 3 hours of recordings can exist across all recordings for the same service.
- Check your charting notes after the bar completes. Progress reaching 100% means the upload succeeded; it does not mean processing is finished. Charting note generation happens after the upload and may take additional time depending on recording length.
Troubleshooting
The progress bar is stuck and not advancing.
The upload may have stalled due to a network interruption. Check that your device has an active Wi-Fi or cellular connection. If the connection is active but the bar remains frozen for more than two minutes, close and reopen ZMA, then navigate to the appointment to verify whether the recording was registered. If the recording does not appear, attempt the session again.
The progress bar disappeared before reaching 100%.
This can occur if ZMA was closed or the device lost power during the upload. Open ZMA again and navigate to the appointment record. If no recording or charting notes are visible, the upload did not complete. You may need to record the session again or contact your administrator for assistance.
The upload completed but no charting notes appeared.
Charting note generation begins after the upload finishes and runs separately in the background. Allow a few minutes for processing to complete, then refresh the appointment record. If notes do not appear after 10 minutes, the processing may have encountered an error. Contact your administrator or Zenoti Support to investigate the recording status.