ZenotiHelp

Create a campaign

ZTZenoti Docs Team Updated September 23, 2026 16 min readGuide

You can create personalized campaigns across different channels such as email, SMS, WhatsApp, and RCS. Use campaigns to send announcements, discounts, cashback offers, or other promotions to targeted groups of guests.

Scope: WhatsApp and RCS campaigns follow the SMS flow with pre-approved templates. WhatsApp templates require Meta approval and RCS templates require carrier approval β€” see Configure DLT and KYC compliance for the template approval prerequisites.

For mode definitions (Scheduled, Always-On, Auto-Apply, Trigger-based, Cashback, OTP-authorized) and when to use each, see Campaign modes overview.


On this page


Before you begin

  • You need the following permissions:

    Permission: Add under Campaigns in the Marketing Manager section β€” Required to create new campaigns.

    Permission: Edit under Campaigns in the Marketing Manager section β€” Required to modify existing campaigns.

    Permission: Delete under Campaigns in the Marketing Manager section β€” Required to remove campaigns.

    Permission: Send/Schedule Email Campaign under Campaigns in the Marketing Manager section β€” Required to publish email campaigns.

    Permission: Send/Schedule SMS Campaign under Campaigns in the Marketing Manager section β€” Required to publish text message campaigns.

    Two kinds of campaign permission. Add, Edit, View and Delete control whether the Campaigns area is visible at all β€” a role needs at least one of them before Marketing > Campaigns appears in the menu. The Send/Schedule permissions control what you can publish once you are there.

Granting only the Send/Schedule permissions is not enough: the role will not see the Campaigns menu, so the schedule option never appears. Grant View alongside them for a scheduling-only role β€” it is the narrowest of the four that makes the area reachable. Granting Delete also works, but it hands the role the ability to remove campaigns, which is rarely what is intended.

  • Ensure you have consent from guests to receive campaigns as per TCPA requirements.
  • Ensure you have a physical address added for your center. As per CAN-SPAM compliance, any marketing emails you send must include the business's physical address. Violating this law can result in a penalty of up to $42,530.
  • If your promotion offers a discount, create a discount first. If your promotion offers loyalty points, create a loyalty points promotion first. No prior setup is required for cashback offers.
  • If you want only specific guests to receive the campaign, create a target segment.

Plan what you would offer with a promo

Before creating a campaign, plan the following:

  • At which level would you like to run the promotion? Across all centers in your organization, across centers at a zonal level, or at a single center.
  • Which enticement would you like to use to draw the attention of your target audience β€” a discount, loyalty points, or a cashback offer?
  • Decide whether you want to roll out the benefit to all guests or only to a target audience.
  • In parallel with the setup in Zenoti, build and implement your media marketing strategy. Design your ads, decide the channels, and then broadcast or publish them.

Set up things in Zenoti as per your plan

Based on your plan, you may need to set up one or more of the following:

Steps

Create an email campaign

  1. At the organization level, navigate to Marketing > Campaigns > Email/text/whatsapp.
  2. Select one of the following:
    • Add Scheduled Campaign: Send an email on a scheduled date and time.
    • Add Always on Campaign: Set up a series of emails that Zenoti sends at the right time to the right guests.
  3. Enter the campaign information.
  4. Click Done.
  5. Select Email Message as the communication channel.
  6. Click Done.
  7. Select the campaign type (for example, Announcement, Discount, or Cashback).

Note: When you launch a scheduled or always-on cashback campaign, Zenoti prints an auto-generated coupon number and a default coupon text: "Cashback of $ [amount]" on the receipt of the eligible guest. You can customize the text. To include the cashback value in your customized offer text, insert the macro [CashbackValue]. For example, if your offer text is "You have earned a brow wax worth [CashbackValue]!", it appears on the receipt as "You have won a brow wax worth $25!". To learn more about macros, read Macros to customize your email/text campaign.

  1. The Revenue attribution configuration toggle is on by default and allows you to track revenue generated from this campaign. See Configure revenue attribution for details.
  2. Click Done.
  3. Select recipients.
  4. Click Done.
  5. Create the content.
  6. Click Done.
  7. Save and publish.

Create an SMS campaign

  1. Navigate to Marketing > Campaigns > Email/text/whatsapp.
  2. Select one of the following:
    • Add Scheduled Campaign: Send a text message on a scheduled date and time.
    • Add Always on Campaign: Set up a series of text messages that Zenoti sends at the right time to the right guests.
  3. Enter the campaign information.
  4. Click Done.
  5. Select Text Message (SMS) as the communication channel.
  6. Click Done.
  7. Choose a campaign type: Announcement, Discount, or Cashback.
  8. Click Done.
  9. Select recipients.
  10. Click Done.
  11. Create the SMS content.
  12. Click Done.
  13. Save and publish.

Important β€” India SMS: If your campaign targets recipients in India, you must complete DLT (Distributed Ledger Technology) registration and use a DLT-approved content template before sending. Without DLT approval, Indian carriers block or filter your messages. See Configure DLT and KYC compliance for India SMS.

Caution: Zenoti strictly prohibits cannabis-related terms, images, or promotions in messaging content in accordance with federal regulatory guidelines in the USA. Violating this policy may result in your account being blocked. Zenoti is not responsible for any penalties, account restrictions, or other consequences of non-compliance.

Create a media campaign

Media campaigns are promotional campaigns that you activate in Zenoti and make available through offer codes, the Webstore, or at the front desk. Unlike email or SMS campaigns, media campaigns do not send messages directly to guests.

  1. Click the Marketing icon and navigate to Campaigns > Media.
  2. Click Add to add a media campaign.
  3. Enter the campaign information.
  4. Select a campaign type (Discount, Loyalty Points, or Cashback).
  5. Select recipients.
  6. Save and publish.

Enter campaign info

In the campaign info section, enter the following:

Field Description
Campaign Name Enter a name for the campaign. Use a clear, descriptive name. Do not use the following special characters: ~ $ *! "
Offer Code Enter an offer code (for example, SUMFRESH) that guests can use for online purchases. Keep the code simple, short, and readable. Avoid the letter "i", spaces, or hyphens.
Description Enter an appropriate description. The description you enter here is posted in the webstore.

Configure revenue attribution

Note: Clicking Done only closes the section and does not save your information.

  1. To define how long the attribution rules apply after campaign delivery, enter the number of days in the Attribution Time Frame field. This value must be between 1 and 30 days. The default is 14 days.
  2. To specify which items are eligible for revenue attribution, click the plus icon to add mandatory or optional rules. You can add up to 5 mandatory rules and 5 optional rules. By default, a mandatory rule is added with the item type set to "Service" and the item group type set to "All."
  3. On the Add rule window, choose the Item type and subsequent values.
  4. To specify whether a rule is mandatory or optional, select or clear the Mandatory rule for revenue attribution checkbox.
  5. Click Save.

You can track attributed revenue from the marketing dashboard and the Campaign effectiveness report.

Select recipients

For email and SMS campaigns, enter the following:

Field Description
Center Name Select the center for which the campaign is applicable.
Max Redemption The maximum number of times the offer can be redeemed at the selected center, counted across all guests β€” not a per-guest allowance. Enter 1 and the campaign becomes one-shot for that entire center: the first redemption consumes it and every later guest is refused. Leave it at 0 for no limit. Each center on the campaign carries its own value, so one center can be exhausted while others still work. To cap uses per guest instead, use Maximum number of times this campaign can be applied on a guest.
Target Segment Select a target segment from the drop-down list. Click Count to get the exact number of guests in the selected segment. To create a new segment, click Create target segment.
Send campaign to the guest only once in Select the checkbox and enter a number to set how often a guest receives the campaign. For example, entering 60 means the guest receives the campaign once every 60 days.

Scenarios for target segment billing

  • Scenario 1: If you create a 10% discount campaign (valid for 30 days) for a target segment of guests whose birthday is in a week, and you set the same target segment for Target Segment Billing, a guest who visits after the birthday window will not be able to use the discount.
  • Scenario 2: If you create a 15% discount campaign for guests who spend up to $5000 in a single visit and send the email to a wider audience, but set Target Segment Billing as "Guests who spent $5000+", not all guests who received the email will get the discount.
  • Recommendation: Set Target Segment Billing as "All Guests" so that all guests who received the campaign email can use the benefit.

Select recipients for media campaigns

  1. Select Centers: The field shows centers depending on the level at which you roll out your promotion. For an organization-level campaign, select zones or individual centers. For a center-level campaign, only the current center appears.
    • Max Redemption: The maximum number of times the offer can be redeemed at each center, counted across all guests. Each center carries its own value, so one center can be exhausted while others still work. Leave it at 0 for no limit.
  2. Target Segment Billing: Select the target segment from the drop-down list. Click Count to get the number of guests in the segment.
  3. Limit to online and mobile bookings: Select this checkbox to restrict the offer to Webstore and Zenoti mobile app bookings only. When creating a campaign for the Webstore, this toggle is required β€” not optional. Without it, the campaign does not appear on the Webstore even if other Webstore settings are correctly configured.
  4. Limit offer to guests in the target segment billing: This checkbox is selected by default. Clear it to extend the offer to everyone.
  5. Enforce one-time password (OTP) authorization for redemption: Select this checkbox to require OTP confirmation.
  6. Campaign discount and redemption contribute to free service amount: Select this checkbox if you want the campaign discount and redemption amount to count as part of free service revenue.
  7. Show while taking payment: Select this checkbox to display the campaign on the invoice page.

Select campaign type for media campaigns

After entering campaign info, select the type of offer for your promotion.

Discount

  1. Discount: Select the discount you created from the drop-down list. You can also create a new discount from within this page.
  2. Maximum number of times this campaign can be applied on a guest: Enter how many times a guest can use the offer. Enter 1 to allow only one use.
  3. Prerequisites for applying the campaign in POS (Point of Sale):
    • Appointments must be booked between: Set the dates between which an appointment should be booked.
    • Offer is valid between: Select the start and end dates for when guests should book appointments to receive the offer.
    • Campaign can be applied when invoice is between: Set the minimum or maximum bill amount required.

Important: Guests receive the offer only if they are in the target segment and have the appointment date scheduled during the validity period.

Loyalty points

  1. Loyalty Point Program: Select the loyalty points from the drop-down list. Only regular loyalty points can be applied; tier-level loyalty point programs cannot be applied to a media campaign.
  2. Maximum number of times this campaign can be applied for a guest: Enter how many times a guest can use the offer.
  3. Prerequisites for applying the campaign in POS:
    • Appointments must be booked between: Set the dates between which guests can visit.
    • Offer is valid between: Select the start and end dates for booking appointments.
    • Campaign can be applied when invoice is between: Set the minimum or maximum bill amount.

Cashback

Cashback campaigns do not need prior setup in Zenoti. You can specify the cashback value while creating the campaign.

  1. Cashback Value: Enter a percentage value, or change the drop-down to "$" and enter a cash amount.
  2. Coupon Text: Enter the text that appears on the guest's receipt. If left blank, Zenoti prints the default text: "Cashback of [amount]". To include the cashback value in custom text, use the macro [CashbackValue].
  3. Maximum number of times this campaign can be applied for a guest: Enter how many times a guest can use the offer.
  4. Prerequisites for applying the campaign in POS:
    • Appointments must be booked between: Set the dates between which guests can visit.
    • Offer is valid between: Select the start and end dates for booking appointments.
    • Campaign can be applied when invoice is between: Set the minimum or maximum bill amount.
  5. Conditions for Redemption:
    • Cashback is valid for: Enter the number of days or a specific date until which the cashback is valid.
    • Cashback is redeemed by anyone: Select this checkbox to allow any visiting guest to redeem the cashback.
    • Cashback can be redeemed on: Select Services, Products, or both.

Create the content

You can use one of the following options to create email campaign content:

  • Use an available template within Zenoti
  • Use an external HTML code

Use a template within Zenoti

  1. Select a preferred layout: Basic Layout, Themed Template, or Custom Template. To learn more, refer to Use the campaign editor.

  2. Click Select to use a template.

If a campaign fails to save

Important: A campaign that fails validation is not saved and no draft is kept. If you compose a campaign and it fails to save, the campaign does not exist afterwards and there is nothing to recover. Copy any content you want to preserve before attempting to save again.

The following conditions block a campaign from saving. Resolve each one before trying again.

Blocking condition What you see How to resolve
No center selected "Please select at least one center before saving." Select at least one center in the Select centers step.
Offer code already in use by another campaign An error indicating the offer code is already consumed The offer code must be unique across all campaigns in your organization. Note that a media campaign created for a discount counts as one campaign using that code β€” change the offer code to a unique value.
Missing unsubscribe macro (email campaigns) An error indicating the unsubscribe link is missing Each configured content language requires its own unsubscribe macro in the message body. Add the unsubscribe macro to the content for every language you have configured, and not only the default language.
Restricted keywords detected "Restricted keywords found" Remove the flagged words from your campaign content.

Send images in always-on text campaigns

Sending an image in an always-on text campaign is a multimedia send (MMS). Before you can do this, the following prerequisites must all be in place:

  • A marketing number on each center β€” A center must have a marketing number assigned before multimedia marketing can be enabled for it at all. This is a prerequisite for everything else in this list.
  • Multimedia marketing enabled for the affected centers β€” This is enabled by Zenoti Support on a per-center basis. Submit a request to Zenoti Support to enable multimedia marketing for each center where you want to send images.
  • Multimedia marketing enabled at both organization and center level β€” After Zenoti Support enables the feature, it must be turned on at both the organization level and the individual center level before images can be sent.

Note: If a center uses its own messaging provider rather than the Zenoti-managed provider, that center is provisioned separately. Contact Zenoti Support for the provisioning steps specific to your messaging provider.

Note β€” multi-center campaigns: MMS eligibility is per-center. When a campaign targets multiple centers, some centers may have MMS enabled while others do not. The campaign wizard identifies which centers have MMS disabled, and images will only send to the MMS-eligible centers in the campaign.

Once all prerequisites are met, you can attach an image when composing the content step of an always-on text campaign.

What happens next

After creating and publishing your campaign, you can manage it through its lifecycle β€” pause, resume, clone, or delete. See Manage campaign lifecycle for details.

Note: Campaigns apply only to invoices created after the campaign's activation date. Invoices created before the campaign was activated are not eligible for the campaign discount or offer, even if the guest's appointment falls within the campaign validity period.

Additional campaign features

For mode-specific configuration steps (Always-On schedule, Auto-Apply, Trigger thresholds, OTP authorization, Cashback), see Campaign modes overview β€” the concept article that defines each mode and when to use it.

Tips

  • Use a unique, memorable offer code. Offer codes must be unique across all campaigns in your organization. Short, readable codes (for example, SUMMER25) are easier for guests to enter on the Webstore. Avoid characters that look similar, such as the letter "i" and the number "1".
  • Set Target Segment Billing to "All Guests" when in doubt. If you send a campaign to a broad audience but restrict billing to a narrow segment, guests who received the message but fall outside the billing segment cannot redeem the offer β€” which creates a poor guest experience. Widen the billing segment or align it with the send segment.
  • Prepare your content before starting the wizard. Because a campaign that fails validation is not saved and no draft is kept, write and review your email or SMS content β€” including all language variants and the unsubscribe macro β€” before you open the campaign creation wizard.
  • Add the unsubscribe macro to every configured language. If your organization supports multiple content languages, each language variant of an email campaign must include its own unsubscribe macro. Missing the macro in even one language blocks the campaign from saving.
  • Test before publishing. Use Send Test Message (for SMS) or Send Test Mail (for email) in the content step to verify formatting, links, and macros before the campaign goes live.

Troubleshooting

A role has the Send/Schedule permissions but no schedule option appears. Check whether the role also has Add, Edit, View or Delete on Campaigns. Without at least one of these the Campaigns menu does not render, so there is nothing to schedule from. Add View and re-check.

The campaign fails to save with an offer code error. The offer code you entered is already used by another campaign in your organization β€” including media campaigns created for discounts, which each consume one offer code. Change the Offer Code field to a value that is not in use by any other campaign and try saving again.

The campaign fails to save with an unsubscribe link error. Every configured content language in an email campaign must contain the unsubscribe macro in its message body. Open the content step, switch to each language variant using Select Content Language, and confirm the unsubscribe macro is present in each one. Save again after correcting all variants.

The campaign was published but guests are not receiving it. Check the following in order:

  • Confirm the campaign's activation date. Campaigns apply only to invoices created after the activation date.
  • Confirm the guest has opted in to receive marketing messages (email or SMS, as applicable).
  • Confirm the guest's email address or mobile number is valid and on file.
  • Confirm the center has sufficient messaging credits.

Images are not sending in an always-on text campaign. Multimedia sends require multimedia marketing to be enabled for the center by Zenoti Support, a marketing number assigned to the center, and multimedia marketing turned on at both organization and center level. If any of these prerequisites are missing, the image will not send. Contact Zenoti Support to verify the center's multimedia marketing status.

The campaign is live but the discount is not applying at the Point of Sale. Verify that the offer code entered at the Point of Sale matches the campaign's Offer Code exactly. Also confirm that the guest meets any prerequisites configured in the campaign (appointment booking date range, invoice amount range, and target segment membership).

Was this article helpful?
Your feedback helps us improve our documentation.