ZenotiHelp

Configure notification template customization

ZTZenoti Docs Team Updated October 18, 2026 9 min readHow-to

Notification templates in Zenoti are authored at the organization level. A center cannot edit what a template says β€” there is no per-center content override built into the standard template list. If you are at a center and cannot find an edit control on a template, that is the intended design, not a permission problem. This article explains the authoring model, what a center can do (enable or disable per channel), how to edit an organization template, and the supported routes when a center needs different wording.

Note: Whether a center can switch transactional notifications off at all depends on the organization setting Allow centers to turn off transactional email & text notifications. With that setting off, centers see the organization's templates and cannot change the channel switches either. Enabling it does not let a center edit template content β€” content is authored at the organization level in every case.

Before you begin

  • You need administrator access at the organization level to edit template content.
  • Familiarize yourself with the available macros before editing templates. See Configure notification template macros.

Permission: Edit under Organizations in the Administrator section of the security role (Configuration > Security > Security roles) is required for organization-level template editing.


On this page


Who can edit templates β€” the authoring model

Templates are authored at the organization level. An organization administrator writes the subject line, body, and macro set for each template, and that content is what every center sends. A center cannot edit template content from the center view β€” the editing controls are not present there. This is by design.

The table below summarizes who can do what:

Action Organization administrator Center administrator
Edit template subject, body, macros Yes No
Enable or disable a template per channel Yes Yes (per channel, from the center templates list)
Configure forwarding rules (CC/BCC) Yes No
View template content Yes Yes (read-only)

Permission: Edit under Organizations in the Administrator section of the security role β€” required to create or modify organization-level templates. Without this permission, the template editor opens in read-only mode.


What a center can do

From the center-level templates list, a center administrator sees each template listed with a per-channel switch. The switches are:

  • Email β€” turns email delivery on or off for that template at this center.
  • Text β€” turns text message delivery on or off for that template at this center.

There is no editing affordance in the center view. If a center administrator opens a template, they see the current content as authored at the organization level, but all fields are read-only. The absence of an edit control is the design, not a missing permission.

Note: Whether these switches can be changed at all depends on the organization setting Allow centers to turn off transactional email & text notifications. With that setting off, a center sees the organization's templates but cannot change the channel switches.

Note: Turning a channel off at the center level suppresses that channel's delivery for that template at that center only. Other centers and other channels are not affected.


Channels at organization level vs center level

The organization-level template editor exposes more channels than the center view. A channel that appears in the organization editor may not be present at all on the center screen β€” either because it is not provisioned for your organization or because the center view surfaces only the channels that are active for that center.

The following table shows which channels each view exposes and what each level can do with them:

Channel Organization view Center view
Email Edit content; On/Off status in the list; switch in the template editor Yes/No switch
Text Edit content; On/Off status in the list; switch in the template editor Yes/No switch
WhatsApp On/Off or N/A status in the list; switch in the template editor Not shown in the center list
Push Status column in the list (On, Off, or N/A); the template editor has no push switch Not shown in the center list

Where a channel does not apply to a given template (for example, a template that has no push variant), the list shows N/A for that channel rather than omitting it. If you see N/A for a channel, it means the template type does not support that channel β€” not that the channel is unavailable for your organization.


To access organization-level templates:

  1. Navigate to Configuration > Notifications > Templates for email and text at the organization level.

To access center-level templates:

  1. Switch to the center you want to configure.
  2. Navigate to Configuration > Notifications > Templates for email and text at the center level.

Note: The templates row appears at the center level only when the organization setting Allow centers to turn off transactional email & text notifications is on.


Template audience types

Templates are organized by the audience they target. When you browse templates in the editor, you can filter by audience type.

Audience Description
Guest Notifications sent to guests (appointment confirmations, invoices, reminders)
Employee Notifications sent to employees (credentials, password resets)
Internal System and admin notifications (alerts, internal reports)
Appointment Appointment-specific templates (confirmations, reminders, cancellations)
Memberships and packages Membership and package lifecycle templates (signup, renewal, expiry)
Mobile and online Templates for mobile app and online booking notifications

Customize an organization template

Organization template editing is the only way to change what a notification says. Editing one language variant does not change the others β€” each language is authored independently.

  1. Navigate to Configuration > Notifications > Templates for email and text at the organization level.
  2. Expand the template group (for example, Appointment) and select Edit on the template you want to customize.
  3. Under Select Content Language, select the language variant you want to edit. Editing one language does not affect other language variants.
  4. Confirm that Use this language template is selected.
  5. Edit the Subject by typing directly in the subject field. You can insert macros such as [CenterName] or [AppDate].
  6. Edit the HTML body using the rich-text editor. Insert macros from the Available Macros list beside the editor.
  7. Edit the Plain Text body for channels that use plain text (SMS). Keep the message concise because macros expand to full values that count toward character limits.
  8. Configure forwarding rules if the notification should be copied to additional recipients (see the next section).
  9. Select Save to apply your changes.

Your changes apply to every center in your organization.


Configure template forwarding rules

Forwarding rules let you automatically send copies of notifications to additional recipients. You can configure both CC (visible to all recipients) and BCC (hidden from the primary recipient) forwarding.

Forwarding target Description
By role Forward to all users with a specific role (for example, Center Manager)
By user Forward to specific named users
By email address Forward to specific email addresses
By provider Forward to the provider assigned to the appointment

To configure forwarding:

  1. Open the template you want to edit.
  2. Next to Cc (email) or Forward To (text message), select Add.
  3. Choose how to add the recipient β€” by role, by job, specific employees, or an email address.
  4. Add recipients as needed.
  5. Select Save.

When a center needs different wording

Because template content is authored at the organization level and centers cannot edit it, there are two supported routes when a center needs different wording:

  • Request the change from whoever administers the organization. The organization administrator can update the template content. The updated content applies to every center, so where only one center needs different wording, the administrator can rewrite the fixed text as a center-specific macro.
  • Use macros that resolve to center-specific values. Macros such as [CenterName], [CenterPhone], [CenterAddress], and the custom optional fields ([CustomMacro1] through [CustomMacro10]) resolve at send time to the values configured for the center where the notification originates. A single organization-authored template that uses these macros renders correctly for every center without requiring per-center content overrides.

Text that prints at the top or bottom of an invoice receipt β€” for example a refund policy printed below the center name and address β€” comes from two organization-level templates in Templates for email and text: Customer Email Receipt Header and Customer Email Receipt Footer. Despite the word "Email" in their names, these two templates supply the header and footer for printed receipts as well as emailed ones.

Because both templates are authored at the organization level, a center cannot change its own receipt footer by editing them. Where a center needs its own wording on the printed receipt, use the center-level Enter a custom message setting under Configuration > POS, which prints the message you enter at the bottom of each guest receipt for that center only.

Each of the two templates has a version per language. A receipt uses the version for the guest's language and falls back to English when no version exists for that language.

Important: Editing Customer Email Receipt Header or Customer Email Receipt Footer changes receipts for every center in the organization. Confirm the wording is correct for all centers before you save, or move the center-specific part into that center's Enter a custom message setting instead.


Preview and test templates

Before activating a customized template, use the preview feature to verify how the notification appears to recipients.

  1. Open the template you want to preview.
  2. Open the preview in the template editor.
  3. Review the rendered template with sample macro values to confirm that formatting, layout, and macro placement are correct.
  4. Send a test notification to yourself to verify the final result.

Tips

  • Start by customizing organization-level templates. Use center-specific macros ([CenterName], [CenterPhone], [CustomMacro1]–[CustomMacro10]) in the organization template so one template renders correctly for every center.
  • When editing HTML email templates, test across multiple email clients (Gmail, Outlook, Apple Mail) because rendering can vary.
  • Use forwarding rules to keep center managers informed about important notifications like cancellations or failed payments without requiring them to monitor a shared inbox.
  • Keep your own record of which templates you have customized at the organization level, and which channels each center has switched off. That record is the fastest way to trace a notification a center says it never received.
  • If you disable a template at the organization level, that notification type is not sent to any center.
  • When a center needs different wording, the fastest path is to ask the organization administrator to update the organization template using center-specific macros rather than requesting a per-center content change.
  • For receipt wording, decide early whether the text belongs to the whole organization (the header and footer templates) or to one center (Enter a custom message). Mixing the two makes the printed receipt hard to reason about.

Send a test message

Before publishing a template, send yourself a test message to verify the rendered output, macro substitution, and channel formatting. The test buttons live in the template editor.

  1. Open the template you want to test.
  2. Configure or edit the template content as needed.
  3. To test the email channel, select Send Test Mail. Enter the recipient email and select Send. Zenoti dispatches a single test email using the current template content with sample data substituted for macros.
  4. To test the text channel, select Send Test Message. Enter the recipient phone number and select Send. Zenoti dispatches a single test text message.
  5. Verify the received message in the recipient inbox or device. Check that subject lines, body content, macro substitutions, and any formatting render as expected.

Note: Test messages consume one credit per send (per channel), the same as a production message. Use a controlled test recipient list to avoid burning communication credits.

Language picker

Use Select Content Language to select which locale's template variant to edit. The language list shows the locales that your organization has enabled. Editing one language variant does not change any other language variant β€” each locale's content is maintained independently. To enable additional locales, contact your Zenoti account manager.

Was this article helpful?
Your feedback helps us improve our documentation.