Redeem package benefits
Redemption applies a guest's active package benefits to an invoice at checkout, reducing the service or product price per the package's configuration. Staff can also undo a redemption, view remaining balances, and review usage history.
Admin-configured redemption policies (frequency limits, cross-center restrictions, sequential order, same-day constraints, no-show fees, transferred credits) are documented in Configure redemption controls. This article covers the day-to-day staff workflow only.
Audience: Front desk staff processing package redemptions at checkout.
On this page
- Before you begin
- Access the package details panel
- Steps
- Interactions with other discounts and credits
- Worked example
- Tips
- Troubleshooting
- Related articles
Before you begin
Permission: Edit under Packages in the Administrator section of the security role — Allows redeeming package benefits during checkout.
The guest must have an active package with remaining benefits.
The package must be within its validity period. To honor benefits after expiry, see Manage package validity.
If the package has sequential service ordering configured (see Configure package benefits), earlier-ordered services must be redeemed first. Out-of-order redemption is blocked automatically.
The redemption date must fall inside the package's validity window. Zenoti checks the redemption date on the invoice against the period the package is valid for — not against today's date. Two common consequences:
- A package created and sold on the same day cannot be applied to an invoice generated that same day.
- A package bought after the service took place is not available on that earlier invoice.
In both cases the fix is the same: set the redemption date on the invoice to a date inside the package's validity window. Consult your organization's policy on back-dating before doing so — see Configure redemption controls.
The window opens according to the package's Validity starts setting — either From Sale Date or At First Redemption. When validity starts at first redemption, the window does not open until the guest redeems the first benefit.
The sale date of a package cannot be changed after purchase. If the package's validity window itself is wrong, use Change Start Date (before any benefit is redeemed) or Extend Expiry — see Manage package validity.
Category and tag benefits are resolved at redemption. When a package grants a benefit through a service category or tag, Zenoti checks which services that category or tag holds at the moment of redemption — not which services it held when the guest bought the package. A service added to the category or tag later becomes redeemable for everyone holding the package. A service moved out of the category, removed from the tag, or left in an emptied category stops being redeemable for everyone holding the package, including guests who bought before the change. Inactive services never qualify through a category or tag. A benefit that was added as a single service is not affected by category changes.
Cross-center restriction: When the organization setting for cross-center package redemption is disabled, benefits can only be redeemed at the center where the package was purchased. See the full list of behaviors in Configure redemption controls.
Frequency limit: If the package has a minimum number of days required between redemptions, Zenoti blocks redemption until that interval has elapsed. Contact your administrator if you need to override this restriction.
Access the package details panel
All procedures in this article begin from the package details panel. Navigate there once and reference it for each subsequent task:
- Open the guest's profile.
- Select the Packages tab.
- Click the package name to open the package details panel.
Subsequent procedures refer to this location as "the package details panel."
Steps
Apply benefits to an invoice
- At checkout, open the guest's invoice. Zenoti detects that the guest has an active package with matching benefits.
- Apply in one of two ways:
- Auto-apply — If the organization has enabled automatic package matching at checkout, Zenoti automatically matches invoice line items to available package benefits and applies the configured package pricing or discount. Staff can accept or override the match.
- Manual apply — From the invoice, select the package to apply from the guest's active packages, then confirm which invoice lines use package benefits.
- The invoice updates to reflect package pricing:
- Service credits reduce the service price to the configured service price on the benefit (often zero when the guest prepaid via the package).
- Product benefits adjust the product price per the package's configured discount.
- Discount slabs apply tiered discounts based on the guest's cumulative consumption of the benefit.
- Complete checkout.
Note: When a guest has multiple active packages covering the same service, Zenoti selects one automatically (typically by expiry date or sale order). Confirm the applied package matches the guest's expectation before completing checkout.
Undo a redemption
If a redemption was applied in error and the invoice is still open:
- Open the invoice with the applied package benefits.
- From the package details panel, click Undo.
- Confirm the action.
Zenoti removes all package applications from the invoice, restores original line prices, and returns the consumed credits to the guest's package balance.
Important: Undo is only available while the invoice remains open. Once an invoice is closed, contact your administrator about refund options. See Refund a package.
Remove a single item's package application
To remove the package application from one invoice line while keeping benefits applied to other lines:
- Open the open invoice.
- Locate the specific line item from which you want to remove the package benefit.
- Select the option to remove the package application from that item only.
The selected line item reverts to its standard price. Other lines on the invoice retain their package benefits, and the released credit is returned to the guest's package balance.
View package balances
Navigate to the guest's Packages tab in their profile.
Open the active package. Balances display per benefit type:
Balance type What it shows Service credits Remaining sessions for each service in the package. Product balances Remaining quantity for each product included. Day package balances Remaining day-package experiences (series packages containing day packages). Room balances Remaining room-type allocations (day packages with room benefits). Filter balances by center if the guest has packages at multiple centers.
View usage history and transaction log
- From the package details panel, open the usage history view to see a paginated list of all redemptions, including date, service or product used, and quantity consumed.
- Open the transaction log for a detailed chronological record of purchases, redemptions, reversals, and status changes.
Note: Usage history is paginated. Use the navigation controls to move through older records.
Interactions with other discounts and credits
- Memberships. When a guest has both an active membership discount and a package covering the same service, the package usually takes priority because the package service price is typically $0 (fully prepaid). If both apply, the package is consumed and the membership discount does not stack on the same line.
- Loyalty points. Points accrue per the organization's loyalty rules. Many organizations exclude zero-dollar package redemptions from point accrual; confirm with your administrator. For loyalty points on packages, see Loyalty points.
- Promos and coupons. Promo stacking with package redemption is configurable. By default, most organizations prevent stacking on the same line item to avoid double-discounting. For package promotions, see Marketing campaigns.
- Gift certificates for balance. If a redemption still leaves a balance on the invoice (for example, added products or overages), a gift certificate can pay the remainder. Gift cards can be used as payment. See Gift cards.
- Transferred credits. Benefits transferred from another guest do not create a package for the recipient. They appear on the recipient's Wallet tab under Received credits and are redeemed at checkout against the original package. The invoice shows the package rate (often $0) as the applied price. For the full procedure, see Apply transferred package service credits.
- Partial credits. If a package benefit covers only part of a service price, the remaining balance is charged at the standard rate. The guest pays the difference using any accepted payment method.
- Multi-package disambiguation. When a guest has more than one active package covering the same service, Zenoti applies one automatically. Use manual apply to override and select a specific package.
Worked example
A guest has a series package called Signature Facial Series that includes five 60-minute facials at $0 each (fully prepaid). The guest arrives for their third facial.
- The front desk opens the guest's invoice for the 60-minute facial service ($120 list price).
- Zenoti auto-applies the Signature Facial Series package, reducing the facial price to $0.
- The invoice shows: Facial — $120 → $0 (package applied). Remaining balance: $0.
- The front desk confirms and closes the invoice.
- The guest's package balance updates from 3 remaining sessions to 2.
If the guest also purchases a retail product ($35) during the same visit, the product is charged at full price unless the package includes a product benefit. The guest pays $35 for the product using their preferred payment method.
Tips
- Verify the right package auto-applied. When a guest has multiple active packages covering the same service, Zenoti picks one deterministically (typically by expiry date or sale order). Staff should confirm the applied package matches guest expectation.
- Use manual apply when the guest has preferences about which package to consume first (for example, use the older package before the newer one).
- Check balances before the appointment when a guest has several packages. Low-balance packages may need extension; expired ones may need honoring via the extend workflow. See Manage package validity.
- Leave a note on the invoice when undoing a redemption. Future reconciliation is much easier with an explanatory note.
- Confirm frequency limits before attempting redemption. If the package has a minimum interval between redemptions, Zenoti blocks the application until the required number of days has elapsed. Check the package details panel for the next eligible redemption date.
Troubleshooting
- "No package auto-applied at checkout." Check: (1) the guest has an active package; (2) the service on the invoice is a benefit of the guest's own package — open the guest's Packages tab, open the package, and check its Services tab rather than the package in your catalog; (3) sequential ordering is not blocking the redemption (an earlier-ordered service may need to be redeemed first); (4) the redemption center matches the package's cross-center policy; and (5) the minimum days between redemptions have elapsed. See Configure redemption controls.
- "We cannot apply package benefits because the services/products in the invoice are not part of the package." Zenoti shows this one message for several different causes, and the message alone does not tell them apart. Check them in this order:
- The service is not on the guest's package. Open the guest's Packages tab, open the package and check its Services tab (or Products tab for a product). Do not rely on the package in your catalog: a package edited after the guest bought it can list services the guest's package does not. Finding the service on the catalog package proves nothing about the guest's package.
- The package covers the service through a category or tag, and the service has left it. Category and tag benefits follow the services the category or tag holds at the moment of redemption. If the service was moved to another category, removed from the tag, or made inactive, it no longer qualifies — for this guest and for every other guest holding the package, including guests who bought it before the change. The reverse also holds: a service added to the category or tag later becomes redeemable for everyone holding the package. A benefit that was added as a single service is not affected by category changes.
- The service date is outside the package's dates. The service must fall on or after the package's start date and before it expires, including any grace period. A package bought after the service took place cannot be used on that service.
- The package was frozen or closed on that date.
- "The package balance shows zero but the guest says they have sessions left." The guest may have used all sessions, or a refund or reversal removed the balance. Open the transaction log to review history.
- "Same-day purchase and redemption is blocked." By configuration, some organizations prevent redeeming a package on the same day it was sold. Use the previous date as the redemption date, or contact your administrator to adjust the configuration.
- "The redemption applied the wrong package." Undo the application and use manual apply to pick the correct package.
- "A refund returned money but not package balance." Benefit restoration on refund depends on refund-policy configuration. See Refund a package.
- "Redemption is blocked at this center." The package may be restricted to the selling center or to centers within the same zone. Contact your administrator to review the cross-center redemption setting for this package. See Configure redemption controls.