Manage the suggested schedule
The AI Employee Scheduler analyzes historical demand patterns and proposes a provider roster for each day in the upcoming 28-day forecast horizon. This article explains how to read the suggested schedule, act on individual recommendations, and copy the finalized week into Zenoti.
Availability: The AI Employee Scheduler is in Beta. Your center is enrolled automatically by Zenoti — there is no customer enable step.
Audience: Center managers who review and act on AI-generated scheduling recommendations.
Before you begin
- Your center must be enrolled in the AI Employee Scheduler Beta. Enrollment is managed by Zenoti; contact your Zenoti representative if the AI Scheduling toolbar button is not visible.
- Confirm that your center's scheduling rules — including maximum working hours, leave days, and non-working days — are configured before reviewing suggestions. The system uses these as hard constraints when building the recommended roster.
- Familiarize yourself with the six change types that appear on the Schedule Grid (see Understanding change types below) so you can act on recommendations confidently.
Steps
Understand change types
Each cell on the Schedule Grid carries exactly one recommendation label for that provider–day combination. The table below maps the label you see on the grid to the description shown in the Definitions panel.
| Schedule Grid label | What it means | Definitions panel name |
|---|---|---|
| No change | The provider's existing shift already matches predicted demand | No Change |
| Add {h}h | The provider's existing shift should be extended; the hours delta is shown when known | Extend |
| Reduce {h}h | The provider's existing shift should be shortened; the hours delta is shown when known | Trim |
| Remove | The provider's shift is not needed that day | Skip |
| New shift | The provider is off, but predicted demand requires them | Schedule |
| Move shift | The shift length stays the same, but the start and end times should change | (not listed in the Definitions panel) |
Note: These labels are recommendations, not outcome states. Nothing is applied to the live schedule until you select Copy all.
Open the suggested schedule
In Zenoti, navigate to Employee > Schedule, then select AI Scheduling from the schedule toolbar.
The page opens under the title Demand based Scheduling.
Use the calendar-week selector to choose the week you want to review.
The Schedule Grid loads with one row per eligible provider and one column per day in the selected week.
Review the day-level coverage summary row at the top of the grid. Each day shows one of the following states:
- {h}h understaffed — Scheduled supply is below predicted demand for that day.
- +{h}h overstaffed — Scheduled supply is above predicted demand.
- Optimised — Supply and demand are balanced; no changes are suggested.
- Reallocation — Supply and demand are balanced overall, but individual shift changes are suggested.
- No change needed — No adjustment is required.
- Off day — No providers are rostered.
- No demand forecast — Providers are rostered but no forecast is available.
- Center closed — The center is closed that day.
Note: A Min coverage badge marks hours that are staffed by minimum-presence rules rather than by predicted demand.
Scan the grid cells for recommendation labels. Click any cell to view an inline tooltip with details about why the system made that recommendation.
Act on a recommendation to extend an existing shift
When a provider's cell shows Add {h}h, the AI Employee Scheduler has determined that the provider's current shift is shorter than predicted demand warrants.
- On the Schedule Grid, locate the provider row and the day showing Add {h}h.
- Click the cell to open the inline tooltip. The tooltip explains the expected demand for that slot length.
- To adjust the shift, select Edit schedule from the tooltip. The Edit schedule panel opens inline.
- Update the provider's shift end time to reflect the recommended additional hours.
- Select Save. The grid updates to reflect your edit.
Note: The system ranks eligible providers by past utilization — providers with consistently higher utilization appear first and are given priority when hours are allocated. When you extend a shift, you are acting on a recommendation the system generated using that ranking.
Call in a provider on an off day
When a provider's cell shows New shift, the AI Employee Scheduler has determined that predicted demand requires a provider who is currently not scheduled.
- On the Schedule Grid, locate the provider row and the day showing New shift.
- Click the cell to open the inline tooltip. Review the demand details to confirm the recommendation makes sense for your center.
- To add the provider's shift, select Edit schedule from the tooltip.
- Enter the shift start and end times in the Edit schedule panel.
- Select Save. The grid cell updates to reflect the newly added shift.
Important: The AI Employee Scheduler does not contact providers. Informing the provider that they are needed is a separate step you take outside of Zenoti.
Review the full week before copying
Before you apply any changes to the live schedule, review the complete week:
- Check that all days showing {h}h understaffed have been addressed — either by extending existing shifts, adding new shifts, or making a deliberate decision to accept the shortfall.
- Confirm that Reduce {h}h and Remove recommendations align with your business needs. If a provider should keep their hours despite the recommendation, edit or leave those cells unchanged.
- Verify that no provider exceeds their configured maximum working hours across the week.
Copy the week into Zenoti
When you are satisfied with the suggested schedule for the selected week:
Select Copy all on the Schedule Grid page.
Important: This is the only action that writes the recommended schedule to the live Zenoti schedule. No recommendation reaches the live schedule until you select Copy all.
Confirm the action when prompted.
The schedule is applied. Providers' shifts now appear in the Appointment Book and in all standard scheduling views.
Note: Split shifts are not supported by Copy all at this time.
Worked example: Imagine it is Monday morning and you are reviewing the week of 4 August. Tuesday shows 3h understaffed in the day summary. Scanning the provider rows, you see that Mia Torres has Add 3h on Tuesday — her current shift ends at 2:00 PM but demand runs until 5:00 PM. You click her Tuesday cell, confirm the tooltip shows peak demand from 2:00 PM to 5:00 PM, open Edit schedule, and update her end time to 5:00 PM. Tuesday's summary updates to Optimised. You repeat this check for the remaining days, then select Copy all to push the week into the live schedule.
Tips
- Review the day summary row first. Days labeled Optimised or No change needed rarely need attention. Focus your time on {h}h understaffed and Reallocation days.
- Act on New shift recommendations early in the week. Calling in a provider on short notice is harder as the day approaches. If the Schedule Grid shows New shift for a day later in the week, reach out to the provider as soon as you decide to act on it.
- Use Reduce {h}h and Remove recommendations to manage costs. If demand is forecast to be low, acting on these recommendations avoids overscheduling without requiring manual analysis.
- Run an on-demand recompute if your roster changes significantly. If providers join or leave, or if confirmed appointments shift dramatically, trigger a recompute so the suggestions reflect current conditions. See Run an on-demand recompute.
- Copy all only when the full week is ready. Because Copy all applies the entire week at once, finalize all edits before selecting it.
Troubleshooting
The Schedule Grid shows No demand forecast for a day, but the center is open.
The forecast for that day has not yet been generated or has not reached the scheduler. Trigger an on-demand recompute (see Run an on-demand recompute) and refresh the page. If the state persists, contact your Zenoti representative.
A provider shows New shift but you know they are on approved leave.
The system respects leave days configured in Zenoti as hard constraints. If a provider's leave is recorded correctly and the cell still shows New shift, verify that the leave entry in Zenoti has been saved and is not in a pending state. Once confirmed, trigger an on-demand recompute.
After selecting Copy all, some shifts do not appear in the Appointment Book.
Split shifts are not supported by Copy all at this time. Any split-shift recommendations must be entered manually in the Appointment Book. Standard single-block shifts should copy without issue; if a single-block shift is missing, refresh the Appointment Book and check whether the provider's shift dates match the week you copied.
The day summary still shows {h}h understaffed after you extended a shift.
The grid summary updates based on the total scheduled hours versus predicted demand for the full day. If extending one provider's shift did not fully close the gap, check whether additional providers have Add {h}h or New shift recommendations for the same day.