ZenotiHelp

Configure metrics

ZTZenoti Docs Team Updated October 16, 2026 6 min readHow-to

Metrics are the quantifiable values you track against goals in EzPulse. Before creating goals, configure which metrics are available for your organization and set their display order.

Audience: Business owners and administrators who set up EzPulse for their organization.

Note: For an introduction to EzPulse, see EzPulse overview.

Before you begin

  • You need organization-, zone-, or center-level access to EzPulse settings, depending on the scope you want to configure.

  • Review your organization's performance tracking needs to decide which metrics to enable.

  • Know your subscription tier β€” it determines how many metrics you can select:

    • EzPulse Lite β€” minimum 3 metrics, maximum 12 metrics per scope (organization, zone, center). The dashboard does not activate until at least 3 are selected.
    • EzPulse Pro β€” unlimited metric selection.
  • Scope rules:

    • Organization-level user β€” can configure metrics for the entire organization.
    • Zone (franchise) user β€” can configure metrics only for their zones.
    • Center user β€” can configure metrics only for their center.

    Tier caps apply independently at each scope.

Steps

View available metrics

  1. Click the Settings icon in the navigation bar.
  2. In the left panel, select Metric Configuration.

The system displays all available metrics at Settings > Metric Configuration in a horizontally scrollable table grouped by category, with the following columns:

  • Metric code β€” The unique code that identifies the metric.
  • Metric name β€” The display name of the metric.
  • Category β€” The grouping category (for example, Sales, Visits, Retention).
  • Type β€” The metric measure type.
  • Selected β€” Whether the metric is currently enabled for your organization.
  • Display order β€” The position of the metric in metric lists.

The catalog contains 40+ metrics across these categories: Sales, Visits, Performance, Retention, Products, Memberships, Collections, and Feedback. The Type column shows how each metric is measured and formatted β€” currency (uses your organization's currency symbol), percentage (appends a % suffix), or count (displayed as whole numbers).

Enable or disable metrics

The metric configuration table has a view toggle with three options to filter what you see:

Toggle view Shows
ALL Every metric in the catalog, regardless of selection state
Selected Only the metrics currently enabled for your organization
Unselected Only the metrics not currently enabled

Use these views to quickly find metrics you want to add or review what you have already enabled.

  1. In the metric configuration table, locate the metric you want to enable or disable.
  2. Select or clear the checkbox next to the metric.
  3. Click Save to apply your changes.

Note: Save becomes available only after you make a change. If the button is unavailable, no unsaved changes exist.

Enabled metrics appear in the metric selection list when you create or edit goals. Disabled metrics are hidden from goal creation.

Effect on existing goals when reducing your metric selection: If you remove a metric from your selection, published goals are not affected β€” they continue to track the metrics they were created with. However, for draft goals, metrics that you have unselected will be removed from the draft goal. Review draft goals after reducing your metric selection to ensure they still include the metrics you intend to track.

Tier limits in action:

  • EzPulse Lite β€” when you try to select a 13th metric, the system blocks the action with a tier-cap message. Clear another metric first or upgrade to Pro.
  • EzPulse Lite β€” if you have fewer than 3 metrics selected, the dashboard remains inactive until you reach the minimum.
  • EzPulse Pro β€” no upper bound; select as many as you need.

Reorder metrics

The display order controls the sequence in which metrics appear during goal creation and in goal definition tables.

  1. In the metric configuration table, adjust the display order values for each metric.
  2. Click Save to apply the new order.

Metrics with lower order values appear first.

Worked example: A spa group on EzPulse Lite wants its centers to focus on revenue first, then traffic, then guest return rate. At Settings > Metric Configuration, the administrator selects the checkboxes for Net Sales, Total Visits, and Rebooking Percentage, sets their display order values to 1, 2, and 3, and clicks Save. This meets the Lite minimum of 3 metrics, so the metrics dashboard activates. When a manager later creates a center-level goal for Downtown Center with a target value of $85,000, Net Sales appears at the top of the metric list, followed by Total Visits and Rebooking Percentage.

Search and filter metrics

Use the search and filter tools to find specific metrics:

  • Search β€” Type a metric name or metric code in the search box to filter the list.
  • Filter by category β€” Select a category to show only metrics in that group.
  • Filter by type β€” Select a measure type to show only metrics of that type.
  • Sort β€” Click the Name column header to sort by name (ascending or descending), or click the Type column header to sort by type.

Metrics that require an upgrade

Some metrics are available only on EzPulse Pro or higher tiers. Restricted metrics display an Upgrade badge and cannot be enabled until you upgrade.

Availability: Metrics marked with an Upgrade badge require a higher subscription tier. The checkbox for these metrics stays unavailable on the free tier.

If you see an Upgrade badge on a metric you need, contact your Zenoti account manager to discuss upgrade options.

Coverage rules across scopes

  • An org-level user changes metrics for the whole organization. Zone and center users cannot override organization-level selections; they can only refine within their scope.
  • If a metric is enabled for one center but not for a sibling center, a provider who works at both sees the metric in the app (the system shows the union across the locations the provider can access). This keeps the provider's reporting consistent across multi-center work.

Tips

  • Start with a small set of core metrics (5 to 10) that align with your top business priorities. You can add more later.
  • Use consistent metrics across centers to enable meaningful comparisons.
  • Review your metric selection quarterly to ensure it still reflects your organization's priorities.
  • Assign display order values in increments of 10 (10, 20, 30) so you can insert a new metric between two existing ones without renumbering the whole list.
  • Switch the view toggle to Selected before a goal-planning session to confirm at a glance which metrics your managers will see.

Troubleshooting

Problem Resolution
Save is unavailable after you review the table. Save is enabled only when there are unsaved changes. Select or clear a checkbox, or change a display order value, and then click Save.
A metric you enabled does not appear when you create a goal. Confirm you clicked Save after selecting the checkbox, and confirm you are creating the goal in a center that falls within the scope where the metric was enabled. Switch the view toggle to Selected to verify the metric is in your current selection.
You cannot select another metric, and the system shows a tier-cap message. You have reached the 12-metric cap for EzPulse Lite at that scope. Clear a metric you no longer track, or upgrade to EzPulse Pro for unlimited selection.
The metrics dashboard is inactive even though metrics are selected. EzPulse Lite requires at least 3 selected metrics per scope before the dashboard activates. Select additional metrics and click Save.
A metric you need shows an Upgrade badge and its checkbox cannot be selected. The metric requires a higher subscription tier. Contact your Zenoti account manager to discuss upgrade options.
Metrics appear in an unexpected sequence during goal creation. Metrics are ordered by their display order values, with lower values first. Open Settings > Metric Configuration, correct the display order values, and click Save. Sorting the table by the Name or Type column header changes only your view of the table β€” it does not change the saved display order.
A draft goal no longer includes a metric it had before. Metrics removed from your selection are also removed from draft goals. Re-select the metric at Settings > Metric Configuration, click Save, and then add it back to the draft goal. Published goals keep the metrics they were created with.
Was this article helpful?
Your feedback helps us improve our documentation.