ZenotiHelp

Custom Metric β€” Number of Service Hours

ZTZenoti Docs Team Updated September 20, 2026 6 min readGuide

The Number of Service Hours metric in ezPulse shows how much time employees actually spent servicing guests β€” excluding post-service recovery time. Use this article to understand how the metric is calculated, how to verify its values against Zenoti source data, and how it differs from related performance metrics.

Audience: Business owners and center managers who monitor employee performance in the ezPulse metrics dashboard.

Before you begin

  • You must have an active ezPulse account and a valid Zenoti session. For login steps, see Authentication & Session Management.
  • Employees must have completed appointments recorded in Zenoti for the selected time period. Appointments with no serviced time produce a zero value for this metric.
  • To view employee-level values, employees must be assigned to the metric in their goal definition. See Goal Definitions (Employee-Level Metrics).
  • Recovery time is configured on individual services in Zenoti. If recovery time is not configured on a service, the metric treats recovery time as zero for that appointment.

Note: Number of Service Hours is a predefined metric in the ezPulse catalog. It cannot be modified or replaced by users.

Steps

View Number of Service Hours on the metrics dashboard

  1. Sign in to ezPulse at https://ezpgateway.zenoti.com.
  2. On the metrics dashboard, locate the Number of Service Hours metric card.
  3. Select a time period using the time period selector:
    • Today β€” hours accumulated for the current calendar day
    • WTD (Week to Date) β€” hours from the start of the current week through today, based on your organization's configured week start day
    • MTD (Month to Date) β€” hours from the first of the current month through today
    • QTD (Quarter to Date) β€” hours from the start of the current quarter through today
    • YTD (Year to Date) β€” hours from January 1 of the current year through today
  4. The metric card displays the total Number of Service Hours for the selected center and time period.

Note: The week start day is configured at the organization level and affects all WTD calculations. For organization-level configuration, see Organization Settings.

View Number of Service Hours by employee

  1. From the metrics dashboard, tap or click the Number of Service Hours metric card to expand employee-level detail.
  2. The employee ranking view lists each employee's individual service hours for the selected time period.
  3. Use the center selector to switch between centers. Employee values are calculated per center β€” an employee who works across multiple centers has separate values for each.

Note: The data refresh for this metric is backend-driven and runs on a scheduled basis. Values reflect the most recently completed refresh cycle, not real-time appointment activity.

Understand the metric definition

The Number of Service Hours metric is calculated as follows:

Formula:

(Total serviced minutes βˆ’ Total recovery minutes) Γ· 60, rounded to 2 decimal places

Where:

  • Total serviced minutes β€” the sum of all appointment service durations for the employee at the center, within the selected time period, drawn from schedule records
  • Total recovery minutes β€” the sum of all post-service recovery durations configured on those services, for the same appointments

Recovery time is the post-service period configured on a service to allow the provider to prepare for the next guest. This time is excluded because the employee is not actively servicing a guest during recovery.

Important: Number of Service Hours is distinct from two related metrics:

Metric What it measures Source
Number of Service Hours Actual guest-facing service time, minus recovery time Appointment schedule records
Production Hours Hours logged against checked-in work tasks Attendance and work-task check-in records
Scheduled Hours Total rostered time on the schedule Roster records

These three metrics can differ significantly for the same employee on the same day. Use Number of Service Hours when you want to understand time spent directly with guests.

Worked example

The following example shows how to calculate and verify Number of Service Hours for a single employee and for a center total.

Worked example β€” Single employee:

A provider completes the following appointments on a given day:

Appointment Service duration (min) Recovery time (min)
Appointment 1 60 10
Appointment 2 90 10
Appointment 3 120 10
Appointment 4 180 0
Totals 450 30

Calculation: (450 βˆ’ 30) Γ· 60 = 420 Γ· 60 = 7.00 hours

The ezPulse metrics dashboard displays 7.00 for this employee on this day.

Center total: If a second provider at the same center has 300 serviced minutes and 15 recovery minutes: (300 βˆ’ 15) Γ· 60 = 285 Γ· 60 = 4.75 hours

The center-level Number of Service Hours for the day = 7.00 + 4.75 = 11.75 hours.

Validate dashboard values against Zenoti source data

If a Number of Service Hours value appears unexpected, use the following three-step validation path to cross-check the dashboard against Zenoti source data.

  1. Check the Attendance report for serviced hours.

    • In Zenoti, navigate to the Attendance report for the relevant employee and date range.
    • Identify the total serviced time recorded for each employee. This is the source of the serviced minutes used in the formula.
  2. Check the Appointments report for recovery time.

    • In Zenoti, navigate to the Appointments report for the same employee and date range.
    • Identify the recovery time configured on each completed appointment's service. Sum these values to get total recovery minutes.
  3. Apply the formula manually.

    • Subtract total recovery minutes from total serviced minutes.
    • Divide by 60.
    • Round to 2 decimal places.
    • Compare the result to the value shown on the ezPulse metrics dashboard.

Tip: If the manual calculation matches the Attendance and Appointments reports but differs from the dashboard, the most likely cause is that the data refresh has not yet run for the current period. Values update on the backend refresh schedule, not in real time.

Tips

  • Use MTD or QTD for trend analysis. Today and WTD values fluctuate as the day or week progresses. MTD and QTD give a more stable view of service hour trends across your team.
  • Compare Number of Service Hours to Scheduled Hours. A large gap between the two metrics may indicate that scheduled time is not being converted into guest-facing service time β€” useful for identifying scheduling inefficiencies.
  • Verify recovery time configuration in Zenoti. If Number of Service Hours seems lower than expected, confirm that recovery time is correctly configured on services. Incorrectly high recovery values reduce the metric. For service configuration, see your Zenoti administrator or refer to the service setup documentation in the configurations category.
  • Use the employee ranking view to identify top performers. Sorting by Number of Service Hours in the ranking view highlights which employees are spending the most time with guests, independent of appointment count.
  • Cross-reference with Production Hours. If an employee's Number of Service Hours is high but Production Hours is low, the employee may be completing appointments without checking in to work tasks. Conversely, high Production Hours with low Number of Service Hours may indicate non-service work tasks are consuming scheduled time.

Troubleshooting

The Number of Service Hours value is 0 for an employee who completed appointments.

  • Confirm that the appointments are in a completed status in Zenoti. Cancelled or no-show appointments do not contribute serviced minutes.
  • Confirm that the selected time period in ezPulse covers the date of the appointments.
  • Check whether the data refresh has run since the appointments were completed. The metric updates on a backend schedule, not in real time.

The center total does not match the sum of individual employee values.

  • Confirm that all employees are included in the employee-level view. Some employees may not be assigned to this metric in their goal definition, which can cause them to be excluded from the employee list while still contributing to the center total.
  • Check whether any employees work across multiple centers. An employee's value in the center total reflects only the appointments completed at that specific center.

The WTD value resets on an unexpected day.

  • The WTD time period resets at the start of the week as defined by your organization's week start day setting. If the reset day does not match your expectation, the week start day may be configured differently than assumed. For organization-level configuration, see Organization Settings.

The dashboard value differs from the manual formula result.

  • Verify that you are using the correct recovery time values from the Appointments report, not the service's default duration. Recovery time is the post-service recovery field on the service, not the total appointment duration.
  • Confirm the date range in the Zenoti reports exactly matches the time period selected in ezPulse.
  • If the discrepancy persists after confirming source data, the data refresh may not have completed for the current period. Check back after the next scheduled refresh cycle.
Was this article helpful?
Your feedback helps us improve our documentation.