Challenge Types β Standard, Multi-metric, and Multi-tier
Zenoti supports three challenge types for fitness centers. You select the type in the Challenge Type field, and it determines how the challenge form is structured, how targets are configured, and how student progress is tracked.
Audience: Fitness administrators who create and manage challenges for students.
On this page
- Before you begin
- Challenge types at a glance
- Standard challenges
- Multi-metric challenges
- Multi-tier challenges
- Best practices
- Troubleshooting
- Related articles
Before you begin
- The challenges organization setting must be enabled before challenges are available. If you do not see the Challenges section under the Fitness menu, contact your administrator to activate this setting.
- You need the appropriate security role permission to create and manage challenges.
- Familiarize yourself with the Challenges article before creating your first challenge.
Note: For conceptual background on the challenges feature, see Challenges.
Challenge types at a glance
Zenoti offers three challenge types. When no type is selected explicitly, the challenge defaults to Standard.
You can still change the type after saving β but only while no one has enrolled. As soon as the first member enrols, the Challenge Type options are disabled and Zenoti shows Challenge type cannot be changed after members have enrolled. Decide the type before you open enrolment.
The following table summarizes the key differences:
| Attribute | Standard | Multi-metric | Multi-tier |
|---|---|---|---|
| Number of metrics | One | Up to three (one per row) | One |
| Target structure | Single target value | One target per metric row | One target per tier |
| Progress model | Reach the target | Meet all metric targets | Advance through ranked tiers |
| Best for | Simple, focused goals | Cross-discipline goals | Progressive achievement programs |
Standard challenges
A Standard challenge tracks one metric against a single target value. This is the most straightforward challenge type and works well when you want students to achieve one specific goal. Standard is also the default type when creating a challenge β if you do not select a type explicitly, Zenoti applies this type automatically to preserve compatibility with existing challenges.
How it works
When you select Standard in the Challenge Type field, the form exposes:
- A single Metric selector, with an optional Sub metric
- A single Target Count field
The target count you enter becomes the threshold a student must reach to complete the challenge.
Steps
Navigate to Fitness > Challenges.
Select + Create Challenge.
In the Challenge Type field, select Standard.
Configure the following fields:
- Name β Enter a name for the challenge.
- Start date β Select the date the challenge begins.
- End date β Select the date the challenge ends. The end date must be later than the start date.
- Description β Enter an optional description shown to students.
- Metric β Select the metric to track (for example, classes attended or distance covered). Where the metric offers sub-metrics, optionally select a Sub metric to narrow the scope.
- Target Count β Enter the numeric value students must reach to complete the challenge. Enter a number of up to three digits.
Select Save.
Tip: Use a Standard challenge when you want a clear, unambiguous goal β for example, "Attend 20 classes this month."
Locking after enrollment
Once the first member enrols in a Standard challenge, Zenoti also locks the metric configuration fields:
- The Metric selector and Target Count field are both disabled.
- Zenoti displays the message The metric and target count cannot be changed after members have enrolled inline below the locked fields.
If you need to change the metric or target after enrollment has begun, create a new challenge.
Worked example
A fitness center wants students to attend 15 yoga sessions in January. The administrator creates a Standard challenge named "January Yoga Sprint" with Metric set to class attendance, Target Count set to 15, and a start and end date spanning the full month. Any student who reaches 15 sign-ins completes the challenge.
Multi-metric challenges
A Multi-metric challenge tracks several different metrics at once. A student must meet the target for each configured metric row to complete the challenge. This type is well suited for cross-discipline or total-body programs.
How it works
When you select Multi-metric, the form exposes a repeating metric row builder. Each row is independent and has its own:
- Metric selector
- Target Count field
You can configure up to three metric rows. Once three rows exist, Add Metric no longer adds another. Each row represents a separate metric the student must achieve, and every row carries equal weight β there are no tiers.
Each row must use a different metric. Selecting the same metric twice is rejected with The same metric cannot be selected more than once.
Steps
Navigate to Fitness > Challenges.
Select + Create Challenge.
In the Challenge Type field, select Multi-metric.
Configure the challenge Name, Start date, End date, and Description.
In the metric row builder, configure the first row:
- Metric β Select the metric to track.
- Target Count β Enter the target value for this metric.
To add another metric, select Add Metric and repeat the previous step. You can configure up to three rows in total.
Select Save.
Important: A student must meet the target count for every metric row to complete a Multi-metric challenge. Meeting some but not all rows does not count as completion.
Locking after enrollment
Once the first member enrols in a Multi-metric challenge, Zenoti locks all metric configuration fields:
- Every Metric selector and Target Count field across all rows are disabled.
- The Add Metric and Remove Metric row controls are hidden.
- Zenoti displays the message Metrics and target counts cannot be changed after members have enrolled inline below the locked fields.
If you need to change a metric or any target after enrollment has begun, create a new challenge.
Worked example
A center creates a "Total Fitness" challenge for February with three metric rows: 10 yoga classes, 8 cycling sessions, and 5 strength sessions. A student who attends 10 yoga and 8 cycling sessions but only 4 strength sessions has not completed the challenge. All three targets must be reached.
Multi-tier challenges
A Multi-tier challenge uses a single metric but divides achievement into ranked tiers. Students progress from tier to tier as they accumulate higher target counts on the same metric. This type supports recognition programs where you want to reward incremental improvement.
How it works
When you select Multi-tier, the form exposes:
- A single Metric selector
- A repeating tier row builder
Each tier row requires:
- Tier Name β A label displayed to students (for example, "Bronze", "Silver", "Gold")
- Target Count β The cumulative value a student must reach to achieve this tier
Tiers are ranked in the order the rows appear on the form, starting with the first row. A student who reaches the target count for the second tier has also satisfied the first. Unlike Multi-metric, there is no limit on the number of tiers you can add.
Steps
Navigate to Fitness > Challenges.
Select + Create Challenge.
In the Challenge Type field, select Multi-tier.
Configure the challenge Name, Start date, End date, and Description.
Select the Metric to track across all tiers.
In the tier row builder, configure the first tier:
- Tier Name β Enter a name for this tier.
- Target Count β Enter the target count a student must reach to achieve this tier.
To add another tier, select Add Tier and repeat the previous step.
Add the tiers in ascending target-count order, so the lowest target is the first row.
Select Save.
Important: Add tier rows from the lowest target count to the highest. Because tiers are ranked by row order, entering them out of order presents the tiers to students in that same wrong order.
Locking after enrollment β per tier
For Multi-tier challenges, locking is applied individually per tier rather than to the entire challenge. A tier becomes locked when at least one member has enrolled in that specific tier. For each locked tier:
- The Target Count field is disabled.
- The Remove Tier button is hidden.
- Zenoti displays the message Members have joined this tier. inline beside that tier's row.
Note: The Tier Name field remains editable even for a locked tier. You can rename a tier after members have enrolled in it without affecting their progress.
Tiers with no enrollments and any newly added tiers remain fully editable, even when other tiers in the same challenge are locked. This means you can add new higher tiers to an active challenge at any time, as long as the existing enrolled tiers are not altered in a way the system restricts.
Worked example
A center sets up a "Steps Challenge" with three tiers. The instructor configures the metric as steps walked, then adds three rows in order: "Bronze" at a target count of 50,000, "Silver" at 100,000, and "Gold" at 150,000. A student who reaches 110,000 steps achieves Silver but has not yet reached Gold.
Best practices
- Choose the type that matches your program structure. Use Standard for straightforward goals, Multi-metric for comprehensive fitness programs requiring multiple activities, and Multi-tier for recognition programs that reward incremental progress.
- Settle the type before you open enrolment. The type stays editable only while the challenge has no enrollments. Once the first member enrols it is locked, and changing it means creating a new challenge.
- Plan around the three-metric limit. A Multi-metric challenge holds at most three metric rows. If your program needs more, consider a Multi-tier challenge or run parallel challenges.
- Set realistic target counts. Review historical attendance and activity data before setting targets to ensure the challenge is achievable for your student base. Target counts accept up to three digits.
- Name tiers clearly for Multi-tier challenges. Students see tier names in the CMA and Webstore. Names like "Beginner", "Intermediate", and "Advanced" or "Bronze", "Silver", and "Gold" communicate progress at a glance.
- Use descriptions to motivate students. The Description field is visible to students. Use it to explain the purpose of the challenge and what they earn upon completion.
- Verify the organization setting before creating challenges. If the Challenges section is not visible in the Fitness menu, the organization-level setting for challenges has not been enabled. Coordinate with your administrator before scheduling challenge launches.
Troubleshooting
| Problem | Resolution |
|---|---|
| The Challenges section does not appear in the Fitness menu. | The organization setting for challenges is disabled. Ask your administrator to enable it. |
| The Challenge Type options are greyed out and show Challenge type cannot be changed after members have enrolled. | One or more members have already enrolled, which locks the type. To use a different type, create a new challenge and open enrolment on that one instead. |
| The Challenge Type field is not visible on the creation form. | You may not have the required permission to create challenges. Verify your security role with your administrator. |
| Add Metric does not add another row. | A Multi-metric challenge is limited to three metric rows. Remove a row before adding a different metric, or reconsider whether Multi-tier suits the program better. |
| Saving reports The same metric cannot be selected more than once. | Two metric rows use the same metric. Change one of them to a different metric, or delete the duplicate row. |
| Saving reports that a target must be a number with up to three digits. | A Target Count exceeds three digits. Lower the target, or track a coarser metric so the target fits within three digits. |
| Tiers appear to students in the wrong order. | Tiers are ranked by the order the rows appear on the form, not by target value. Re-add the rows from the lowest target count to the highest. |
| The Metric selector and Target Count are greyed out on a Standard challenge, and the form shows The metric and target count cannot be changed after members have enrolled. | A member has already enrolled, which locks the metric configuration. Create a new challenge if you need a different metric or target. |
| All metric rows are greyed out on a Multi-metric challenge, Add Metric and Remove Metric are no longer visible, and the form shows Metrics and target counts cannot be changed after members have enrolled. | A member has already enrolled, which locks all metric rows. Create a new challenge if you need to adjust metrics or targets. |
| The Target Count for a specific tier is greyed out and the form shows Members have joined this tier. next to that row, but other tiers are still editable. | That individual tier is locked because at least one member has enrolled in it. The Tier Name can still be edited. Tiers with no enrollments and any new tiers you add remain fully editable. |
| Students report that the challenge is not showing in the CMA or Webstore. | Confirm that the challenge start date has been reached and that the relevant settings to show challenges on CMA and Webstore are enabled. See Enable Challenges for CMA and Enable Challenges for Webstore. |
| A challenge created without selecting a type is behaving like a Standard challenge. | This is expected. When no type is explicitly selected at creation time, Zenoti defaults to Standard to preserve compatibility with existing challenges. If the challenge has no enrollments yet, open it and select the type you intended. |