ZenotiHelp

Use a scanner for auto check-in

ZTZenoti Docs Team Updated September 17, 2026 4 min readGuide

Connect a barcode or QR-code scanner to your front-desk computer over a COM or serial port to record guest check-ins automatically throughout the day. The Visits page listens for scanner input in the background — when a guest presents their barcode or QR code, the Visits page resolves the code to a profile and records the check-in without staff clicks. This is useful during peak entry periods when manual search-and-click per guest would slow the line.

Audience: Front-desk staff and center managers who operate the Visits page with a connected hardware scanner.

This article covers the Visits-page scanner that runs at the front desk. If you want guests to check themselves in with a QR code at a Kiosk tablet, see Member or guest self check-in instead.


On this page


Before you begin

Permission: View and Add (under Visits) — required to access the Visits page and record check-ins.

  • The organization- and center-level settings for QR-code scanning must be enabled. See Configure fitness kiosk settings for the scanner-enable settings.
  • The scanner device driver must be installed on the operator's computer.
  • Each guest you intend to scan must have a barcode or key tag associated with their profile.
  • The Visits page must stay open in your browser while the scanner is in use. Closing the tab disconnects the scanner.

Connect the scanner to the Visits page

  1. At the center level, click the Fitness icon and select Visits.
  2. On the Visits page, locate the Scan icon at the right of the Checkin History title.
  3. Click the Scan icon. A device picker opens listing available COM and serial ports on your computer.
  4. Select the port your scanner is connected to.
  5. Confirm the selection.

When the scanner is connected successfully, a favicon appears in the browser tab next to the tab title. This indicates the Visits page is actively listening to the scanner device.

Scan a guest for check-in

With the scanner connected:

  1. Ask the guest to present their barcode, key tag, or QR code to the scanner.
  2. The scanner reads the code and sends it to the Visits page.
  3. The Visits page resolves the code to a profile, records the check-in, and appends the guest to the Recent check-ins row and All check-ins list.
  4. If the profile has any alerts (membership expired, pending payments, unsigned form), those alerts are displayed on the guest's entry in the All check-ins list.

No staff click is required. The scanner-driven workflow is concurrent — multiple scans in quick succession are queued and processed in order.

Impacts and considerations

  • Page must remain open. The scanner integration runs in the browser tab that has the Visits page. If you close the tab, switch to a different browser window that minimizes the Visits tab, or navigate away from Visits, the scanner stops. Re-open the Visits page and re-select the COM port to resume.
  • One scanner per tab. The Visits page listens to one device at a time. If you connect a second scanner, the first one stops. For multi-lane entry, open multiple browser tabs with the Visits page on separate computers.
  • Alerts are still shown. Auto check-in does not bypass the alert system — if the scanned guest has an expired membership or pending payment, the alert appears in All check-ins exactly as it would for a manual check-in. Front-desk staff should monitor the list for any red alerts and resolve them before the guest enters the facility.
  • Audit trail. Scanner check-ins are recorded with the same schema as manual entries. There is no separate scanner-vs-manual distinction on reports.
  • Unreadable codes. If a barcode is damaged or unreadable, the scanner either sends no data or sends garbled characters that fail to resolve. The guest's check-in is not recorded and no entry appears in All check-ins. Re-scan or check the guest in manually.

Tips

  • Keep the Visits page in a dedicated browser window at the front desk — a second monitor works well. Do not use that window for any other task, so the scanner connection is not interrupted.
  • Label the scanner with its COM port (for example, "COM3") so staff know which port to select after a power cycle or reboot.
  • Test the scanner at the start of each shift by scanning a test guest profile. This confirms the connection before a line forms at the door.

Troubleshooting

  • Scanner favicon does not appear. Verify that the scanner is powered on and the USB cable is seated. In Device Manager (Windows) or System Information (Mac), confirm the device is listed under COM & LPT ports. Then click the Scan icon again and re-select the port.
  • Scanner reads but no check-in is recorded. The guest may not have a barcode associated with their profile, or the barcode data does not match any profile. Try a known-good barcode from a test profile. If that works, the original guest's profile needs a barcode assigned.
  • Scanner worked this morning but is disconnected now. The browser tab may have been reloaded or moved to the background. Re-select the COM port to reconnect.
  • Alerts do not appear for scanner check-ins. Confirm the organization-level alerts are configured under Configuration > Fitness > Essentials > Customize visits page alerts. Scanner and manual check-ins display the same alert set.
  • Scanner produces wrong characters. The scanner language mode may be set to a non-English keyboard layout. Set the scanner to US English (QWERTY) mode using its configuration barcode — refer to the scanner manufacturer's manual.
Was this article helpful?
Your feedback helps us improve our documentation.