ZenotiHelp

PTO β€” Apply Leave Request Workflow

ZTZenoti Docs Team Updated September 8, 2026 6 min readGuide

Audience: Employees using MyZen to submit PTO requests for themselves.

Submitting a PTO request in MyZen is a three-screen process: you fill out the leave details, configure per-day times, and review the request before submitting. This article walks you through each step.

Before you begin

  • Your organization must have PTO enabled. If the PTO section is not visible in MyZen, contact your administrator.
  • You must be linked to at least one center. The center defaults to your currently active center when the Apply Leave screen opens.
  • Leave types are defined by your organization and vary by center. You must select a center before leave types load.
  • Days that already have a pending or approved leave request cannot overlap with a new request. If conflicts exist, the system returns you to the first screen with an error listing the conflicting dates.
  • Holiday dates and days with no schedule are treated as non-working days and do not allow leave time entry.

Note: PTO approval is handled by a manager. Submitting a request does not automatically grant PTO β€” you will receive a status update after your manager reviews the request.

Steps

Step 1: Open the Apply Leave screen

  1. Open MyZen and navigate to the PTO section.
  2. Tap the option to apply for leave. The Apply Leave screen opens.

Step 2: Complete the Apply Leave form

Fill in all required fields in order:

  1. Center / Location β€” Tap the dropdown and select the center for which you are requesting PTO. The dropdown defaults to your currently active center.

    Note: Changing the selected center clears your leave type selection and reloads the available leave types for the new center.

  2. Leave Type β€” Tap the dropdown and select the type of leave. This field becomes available only after you select a center. Your available balance for the selected leave type is displayed on screen. If the leave type is configured as unlimited, the balance indicator shows as unlimited rather than a number.

  3. Start Date β€” Tap the date picker and select the first day of your PTO.

  4. End Date β€” Tap the date picker and select the last day of your PTO.

  5. Notes β€” Optionally, enter any notes for your manager.

  6. Tap Proceed.

    Important: If any days in your selected date range overlap with an existing pending or approved leave request, the system displays an error listing the conflicting dates and returns you to this screen. Adjust your start or end date to avoid the conflict before proceeding.

Step 3: Configure leave days

After tapping Proceed, the Configure Leave Days screen loads. Each day in your requested date range appears as a separate row.

For each working day:

  1. Review the pre-populated start and end times. These are loaded from your scheduled shift for that day. If no shift record exists for a day, both times default to 12:05 AM and no schedule bounds are applied.

  2. Use the Full Day toggle to choose how leave is recorded for that day:

    • Full Day on β€” Leave covers your entire scheduled shift for that day. No time entry is required.
    • Full Day off β€” Enter a custom start time, end time, and duration in hours for your leave on that day. The duration you enter is validated against your leave policy's maximum working hours per day.
  3. If your organization has second-shift tracking enabled and a day has a second scheduled shift, a second-shift row appears for that day. The second-shift start and end times are pre-populated from your second scheduled shift for that date when one exists. Configure leave times for each shift independently.

  4. Days marked as holidays or days with no schedule at all appear as non-working days. No leave time entry is available for these days.

  5. After reviewing and adjusting all days, tap Proceed to continue.

Worked example: You request PTO from Monday through Wednesday. Monday shows your shift as 9:00 AM – 5:00 PM β€” you leave Full Day on so the full shift is covered. Tuesday you only need the afternoon off, so you turn Full Day off and enter 1:00 PM as the start time, 5:00 PM as the end time, and 4 hours as the duration. Wednesday is a public holiday and appears as a non-working day with no time entry available.

Step 4: Review and submit

The Review Request screen shows a summary of your PTO request before it is submitted:

  • Leave type
  • Center
  • Start date and end date
  • Total hours requested
  • Notes (if you entered any)
  • A per-day breakdown of shift times and durations

Review each item carefully. If anything looks incorrect, use the back navigation to return to the previous screens and make adjustments.

When you are satisfied with the details, tap Submit.

  • On success: The system returns you to the leave request list. Your request appears with a pending status.
  • On failure: An error notification appears. Review the message and try again, or contact your administrator if the issue persists.

Tips

  • Select your center first β€” leave types do not load until a center is chosen. If you change the center after selecting a leave type, the leave type resets and you need to re-select it.
  • Check your available balance before submitting. After you select a leave type, your remaining balance for that type is shown on screen. If the leave type is unlimited, the display confirms this rather than showing a number.
  • Check for existing requests before submitting. If you have a pending or approved request that overlaps the dates you want, the system will not let you proceed. Review your existing PTO requests before starting a new one.
  • For days where you only need partial leave, turn off the Full Day toggle and enter the exact start time, end time, and duration in hours. This ensures your leave balance reflects only the time you are actually away, and keeps the entry within your policy's maximum working hours per day.
  • If a day shows times of 12:05 AM for both start and end, it means no shift is scheduled for that day in the system. Confirm with your administrator whether that day should be included in the request.
  • Non-working days (holidays and unscheduled days) are automatically excluded from leave time entry β€” you do not need to handle them manually.
  • If your organization tracks a second shift and you work split shifts on any day, a second-shift row appears for that day. Review and configure both rows to ensure all leave hours are captured accurately.

Troubleshooting

The Leave Type dropdown is empty after I select a center. Your administrator may not have configured leave types for that center, or you may not have a leave policy assigned at that center. Contact your administrator to confirm that a leave policy covering that center is set up for your role.

I tapped Proceed on the Apply Leave form and was sent back with an error listing dates. One or more days in your selected range overlap with an existing pending or approved leave request. Review the listed dates in the error message, then adjust your Start Date or End Date β€” or cancel the existing overlapping request first β€” before trying again.

A day in the Configure Leave Days screen shows 12:05 AM as the start and end time. This means no shift record exists for that day. If you expect to have a shift on that day, confirm with your administrator that your schedule has been entered correctly in Zenoti.

I entered hours for a partial day but received a validation error. The duration you entered may exceed your leave policy's maximum working hours per day. Reduce the duration to fall within the allowed limit, or contact your administrator to confirm the policy limit that applies to your leave type.

The Submit button returned an error notification. This can occur due to a connectivity issue or a temporary problem. Wait a moment and tap Submit again. If the error persists, note the error message and contact your administrator.

I cannot see the PTO section in MyZen. PTO availability in MyZen depends on your organization's configuration and your employee role. If you do not see the PTO section, contact your administrator to confirm that PTO is enabled for your center and that your role has access.

Was this article helpful?
Your feedback helps us improve our documentation.