ZenotiHelp

View your earnings dashboard

ZTZenoti Docs Team Updated October 16, 2026 9 min readGuide

The earnings dashboard in MyZen shows an itemized breakdown of what you earned in a pay period β€” hourly pay, commissions, tips, paid time off, tenure bonus, and salary β€” and lets you open each amount to see how it was calculated. It sits under the My Money tab and replaces the Commissions tab at centers where your business has turned it on.

Audience: Employees who want to see how their pay for a period was calculated in the MyZen mobile app.


On this page


Before you begin

  • You must be signed in to MyZen with an active employer link.
  • Your business must turn the earnings dashboard on. The Show Earnings Dashboard in MyZen setting applies to one center at a time and is off by default, so it has to be enabled separately for each center. For the administrator procedure, see Show Earnings Dashboard in MyZen.
  • If you do not see an earnings section under My Money, it has not been enabled for the center you are viewing. Check with your manager or business owner.
  • If your business enables the dashboard while the app is already running, close MyZen and reopen it to see the change.

Open the earnings dashboard

  1. Tap the My Money tab in the bottom navigation.
  2. Open the earnings section.
  3. Select the pay period you want to review.

The dashboard opens on the pay period in progress. Each pay type you earned in that period appears as its own section.

What appears in your earnings dashboard

The dashboard is organized as one section per pay type, in this order:

Section Appears when
Hourly Pay You have an hourly rate and clocked hours in the period
Commissions You earned commission of any type in the period
Tips You have tips for the period
Paid Time Off You took approved paid leave in the period
Tenure Bonus Your tenure bonus for the period is more than zero
Salary Your salary amount for the period is more than zero

A section appears only when you have an amount in that category for the period β€” not as a zero row, but not at all. If you are paid hourly and earn no commission, you never see a Commissions section. If you are paid on commission only, with no hourly rate and no clocked hours, you never see an Hourly Pay section. Nothing needs to be configured for you individually; the dashboard follows your actual pay structure.

Hourly pay

If you have an hourly rate and clocked hours in the period, Hourly Pay breaks into two separate line items β€” your regular pay and your overtime amount. They stay separate so you can see each distinctly, rather than one combined number.

The names depend on whether your business uses the payroll earnings summary:

Your regular pay Your overtime amount When you see these names
Straight Time Pay Overtime Premium Your business uses the payroll earnings summary
Regular Hourly Overtime Pay Your business does not

Task detail when your business uses work tasks

Work tasks let a business pay different rates for different kinds of work β€” for example, a service appointment rate and a front-desk coverage rate. If your business uses work tasks, tap your regular pay line to open WORK TASK BREAKDOWN. Each row names a task you performed and its pay, with the hours and rate shown together underneath in the form 8h Γ— 25/h. A Total straight time pay row closes the card, and those task amounts add up to the regular pay total shown on the dashboard.

Your overtime amount is always its own line item, whether or not your business uses work tasks.

For how work tasks are set up, see Work tasks.

Worked example: You worked two task types in a week. The WORK TASK BREAKDOWN card shows:

  • Blowout appointments β€” 5h Γ— $30/h β€” $150.00
  • Front-desk coverage β€” 3h Γ— $20/h β€” $60.00
  • Total straight time pay β€” $210.00

The Overtime Premium line appears separately for any overtime hours earned that week and is never included in the task breakdown total.

Commissions

The Commissions section appears only if you earned commission in the period. Every commission type you earned shows as its own line, and only types with an amount above zero appear. Which types you see depends on how your business has set up commissions β€” for example, service, product, package, or membership commission.

Drill into a service commission invoice

Invoice-level detail is available for service commissions.

  1. Tap your service commission line to see the invoices that contributed to it, listed newest first.
  2. Tap an individual invoice to see how its commission was calculated: the sale price, any deductions applied, and the final amount counted toward your commission.

For commission types other than service, and if your business uses payroll plans, the dashboard shows your commission total without the itemized invoice breakdown.

Tiers and revenue deductions in the invoice detail

The invoice detail reflects the commission rules your business has configured:

  • Tiered commission slabs β€” if your commission plan uses tiers, the detail shows which tier the invoice's revenue fell into and the rate that applied.
  • Revenue deduction β€” if an amount is deducted from revenue before the commission percentage is applied, the detail shows the deducted amount and the net figure the rate was applied to.

When hourly pay is compared against commission

Some centers guarantee the higher of your hourly pay or your commission for a period, rather than paying both. This is set per center, so it can apply at one location where you work and not at another. Where the comparison is in use, the dashboard shows the result directly:

  • Both the Hourly Pay and Commissions sections stay visible, each showing its full amount.
  • The one that was actually used for your pay carries an APPLIED tag, with Higher of the two alongside it.
  • The other carries a NOT APPLIED tag, with a Compared with line showing what it was measured against.
  • Any overtime you earned is always added on top. It is never part of the comparison itself.

You can open either section to see what was compared β€” the hourly figure, the commission figure broken down by component, and the result.

Note: Your business controls the comparison per center, at Configuration > Employee > Payroll and commissions > Payroll controls. If you have questions about whether it applies to you, contact your manager or business owner.

A Paid Time Off section appears only if you took approved paid leave during the period. For each type of leave you took, it shows the total leave hours for that type, the rate applied, and the resulting PTO pay.

Leave that is still waiting for approval, and leave that was not recorded in Zenoti, does not appear here. If you took no approved paid leave in the period, the section does not appear at all.

To submit and track leave requests, see Manage PTO requests.

Tips in your earnings dashboard

The Tips row appears whenever you have tips for the period. Tap it to open the same tips detail screen you already use β€” nothing changes about how your tips are tracked, calculated, or displayed. Only the way you reach them has moved into the earnings dashboard.

For the full tips workflow, including payout history and adjustments, see View earnings and tips.

Tenure bonus and salary

  • Tenure Bonus β€” the total amount you earned for the period.
  • Salary β€” your salary amount for the period, if you are a salaried employee.

Each appears only when the amount for the period is more than zero.

Keep your earnings data current

The figures in the earnings dashboard come from the same data your business uses for payroll, so you do not need to compare them against another source. How current they are depends on when payroll data was last refreshed, and the dashboard shows that time at the top.

What you can do next depends on a setting your business controls for the whole organization:

  • If your business allows employees to refresh the data, you see a refresh control alongside the last-refreshed time. Use it to pull the latest figures for the current or a past pay period.
  • If your business does not allow it, you see only the time the data was last updated, and your figures update whenever your business runs a refresh.

Caution: Tapping refresh recalculates payroll data for every employee at that center, not just for you. Use it when you genuinely need updated figures rather than as a routine check.

View past pay periods

You are not limited to the pay period in progress. The pay period picker covers the last six months β€” every pay period from the start of the calendar month six months back, up to and including the current one. Older pay periods do not appear; if you have none in that window, the picker reads No pay periods in the last 6 months.

If you work at more than one center

The earnings dashboard reflects the center you are currently viewing in MyZen. If more than one of your centers has the dashboard enabled, switch centers in the app to see each center's earnings.

Note: Depending on the settings your business has enabled, some earnings are consolidated across the centers you work at rather than shown separately. One setting that affects this is Multi-center pay aggregation, which businesses use to include an employee's work from every center in a single payroll calculation rather than only their base center. If you are not sure which view you are seeing, check with your manager or business owner.

If a figure looks incorrect

  1. Check the last-updated time at the top of the dashboard to see when your data was last pulled.
  2. If a refresh control is shown, use it to pull the latest figures.
  3. If the amount still looks wrong, contact your manager or business owner.

Do not calculate a correction yourself. The figures come directly from payroll, and only your business can adjust them.

Tips

  • Review the dashboard after each pay period closes so you can raise anything unexpected while the period is still fresh.
  • If a commission total is not what you expected, open the service commission line and work through the invoices newest first β€” the invoice detail shows the deductions and the tier that applied.
  • If your Hourly Pay total looks low, check whether an overtime line is present. Regular pay and overtime are shown as separate amounts, not as one figure.
  • If you see no Commissions section at all, it means you had no commission for that period β€” it is not an error.

Troubleshooting

I don't see an earnings section under My Money. The Show Earnings Dashboard in MyZen setting has not been enabled for the center you are currently viewing. The setting is off by default and must be turned on separately for each center. Contact your manager or business owner to request that your administrator enable it.

I refreshed but the figures did not change. The refresh recalculates payroll data for all employees at the center. If the figures remain the same after refreshing, the underlying payroll data may not have changed since the last calculation. Check the last-updated time shown at the top of the dashboard. If you believe the data is genuinely stale, contact your manager or business owner β€” payroll figures can only be adjusted by your business.

A pay type I expect β€” such as Commissions or Paid Time Off β€” does not appear. Sections appear only when you have a non-zero amount in that category for the selected pay period. A missing Commissions section means no commission was recorded for you in that period, not that something is broken. If you believe an amount was earned but is not showing, check the last-updated time, refresh if a refresh control is available, and contact your manager or business owner if the figure is still missing.

Was this article helpful?
Your feedback helps us improve our documentation.