ZenotiHelp

Configure service segments

ZTZenoti Docs Team Updated November 12, 2026 12 min readHow-to

Service segments let you divide a single service into ordered parts, each with its own duration, type, and commission share. Segments are useful for treatments that include a waiting period or a distinct finishing portion β€” for example, a color service where product processes on its own between application and styling.

Note: For background on how services are structured, see Services Overview. For the day-to-day view of how segmented services behave once they are defined, see Service segments.


On this page


Before you begin

  • The service must already be saved. Define Service Segments appears on the General tab only after the service has been saved at least once β€” it is not available while you are creating a service for the first time. No organization setting controls the availability of segments.
  • The service must have a Service Time. The segment times you enter must add up exactly to that value.
  • Segments cannot be defined on an add-on service or on a variant.
  • Decide the service's own Commission Type before you add segments. The Flat option inside the segment dialog is available only when the service's Commission Type is Flat amount.
  • If your organization has Allow rounding of commission adjustment in an invoice to maximum of 100% turned on (Configuration > Employee > Payroll and commissions > Commissions), percentage segment commissions must total exactly 100% before the segments can be saved.
  • No employee-level or job-level custom service time may exist for this service. If one does, the segments cannot be edited. See When segments cannot be edited.

Permission: Edit (under Services in the Administrator section) -- Required to define, edit, and delete service segments. Admin path: Configuration > Security > Security roles > [your role] > PERMISSIONS > Administrator > Services > Edit

How segments work

A segmented service is one bookable service made up of several ordered parts. The guest books and pays for a single service; the segments describe how the service time inside that appointment is divided.

Key characteristics:

  • Segments run in order. The order is assigned automatically, in the sequence in which you add the segments β€” there is no field in which you type an order number.
  • Each segment has its own Time, entered in minutes.
  • Each segment has a Type that describes what happens during it: Servicing Time, Processing Time, or Finishing Time.
  • Servicing Time and Finishing Time segments can each carry a commission share. Processing Time segments cannot.
  • The segment times must add up exactly to the service's Service Time. Changing a segment's time does not change the service duration β€” the two must be brought into agreement before the segments can be saved.

How the times must add up

For a service whose Service Time is 55 minutes, the segments must account for exactly 55 minutes:

Segment Type Time
Cleansing Servicing Time 10 min
Exfoliation Servicing Time 15 min
Mask application Processing Time 20 min
Finishing Finishing Time 10 min
Total 55 min

If a segment you are adding would push the running total past the Service Time, Zenoti refuses to add it and shows: "You cannot add this service segment, as the total segment times will exceed the Service Time you've indicated." If the totals fall short when you select Save, Zenoti shows: "The segment times must add up to the Service Time you've indicated."

What the Service Segments dialog holds

Selecting Define Service Segments opens the Service Segments dialog. The upper part of the dialog holds the fields for a new segment; the grid below lists the segments already added.

The fields you fill in for each segment are:

Field Description
Name A descriptive name for the segment (for example, "Cleansing" or "Mask application").
Time The duration in minutes for this segment.
Type Servicing Time, Processing Time, or Finishing Time.
Commission Type Percentage or Flat. This choice applies to all segments of the service and is locked once the first segment is added.
Commission The commission value for this segment β€” a percentage or a flat amount, depending on the Commission Type. Not available for a Processing Time segment.

Select Add to place the segment in the grid below. The grid shows each segment's name, type, time, order, and commission. The order column is filled in automatically in the sequence the segments were added.

Segment types and timing rules

Type What it represents Rules
Servicing Time Active work on the guest. Can be used for any segment, including the first. Can carry commission.
Processing Time Time during which the service progresses without active work β€” for example, color processing. Cannot be the first segment. Cannot carry commission.
Finishing Time The closing portion of the service. Cannot be the first segment. Can only be the last segment, and must have a duration. Can carry commission.

In short: the first segment of a service must be a Servicing Time segment, and a Finishing Time segment must come last.

Commission on segments

Each Servicing Time and Finishing Time segment can carry its own commission, as a Percentage or a Flat amount:

  • Percentage -- the share of the service's commission assigned to this segment.
  • Flat -- a fixed commission amount for this segment.

The Commission Type choice is made once and applies to every segment of the service. Once you add the first segment, the choice is locked β€” to change it, remove all the segments first.

Flat is available only when the service's own Commission Type is Flat amount. With any other service commission type, the Flat option in the segment dialog is unavailable.

Processing Time segments cannot carry commission. The Commission field is unavailable for a Processing Time segment, and the system blocks you from entering a value on it.

When segments use Flat

When the segments use Flat, the service's own Commission field becomes read-only and shows the total of the segment amounts. Save the service after you save the segments so that this total is kept.

When segments use Percentage

Rule: When your organization has commission-adjustment enabled, the commission values across all of a service's segments must add up to 100%. If they don't, you'll see: "Please ensure that total commission sums up to 100%." A service where two segments are each set to 100% commission (for example) fails this check and must be corrected before the segments can be saved -- otherwise a provider could be paid commission twice for the same appointment. A combined total of 0 is also accepted.

The organization setting behind this check is Allow rounding of commission adjustment in an invoice to maximum of 100% (Configuration > Employee > Payroll and commissions > Commissions). When that setting is off, no total is enforced and the percentages are saved exactly as you entered them. Keep them at a 100% total in either case, so that the commission attributed to the segments matches the commission attributed to the service.

The dialog also carries a reminder to keep the commission percentages at a total of 100%. Zenoti enforces that total only when the setting above is on.

Steps

Open the Service Segments dialog

  1. Navigate to Master data > Services and open the service you want to segment.
  2. On the General tab, confirm that the Service Time is the value you want the segments to add up to.
  3. Select Define Service Segments.

Important: If Define Service Segments is not on the General tab, the service has not been saved yet, or it is an add-on service or a variant. Save the service first; segments are not available on add-ons or variants.

Add a segment

  1. In the Service Segments dialog, enter a Name for the segment (for example, "Cleansing").
  2. Enter the Time in minutes.
  3. Select the Type -- Servicing Time, Processing Time, or Finishing Time. The first segment must be Servicing Time, and a Finishing Time segment must be the last one you add.
  4. Select the Commission Type -- Percentage or Flat. You make this choice only on the first segment; it then applies to every segment of this service.
  5. Enter the Commission value. Leave this out for a Processing Time segment -- it cannot carry commission.
  6. Select Add. The segment appears in the grid below, with its order filled in automatically.
  7. Repeat steps 1 through 6 for each additional segment, until the segment times add up to the service's Service Time.
  8. Select Save in the dialog.

Important: Nothing you do in the dialog is kept until you select Save in the dialog. If you close the dialog without saving, the segments you added are discarded.

Note: Worked example -- a 95-minute color service. The service's Service Time is 95 minutes and its Commission Type is a percentage, so the segments use Percentage. Add, in this order: "Consultation and mixing", 10 min, Servicing Time, 20%; "Color application", 30 min, Servicing Time, 40%; "Processing", 25 min, Processing Time, no commission; "Rinse and condition", 10 min, Servicing Time, 15%; "Blow-dry and style", 20 min, Finishing Time, 25%. The times total 95 minutes, matching the Service Time, and the percentages total 100%, so Save completes. The orders 1 through 5 are assigned automatically in the order the segments were added.

Edit a segment

  1. Navigate to Master data > Services, open the service, and on the General tab select Define Service Segments.
  2. Change the segment's values in the dialog.
  3. Select Save in the dialog.

Keep the arithmetic in mind while you edit: after your change, the segment times must still add up exactly to the service's Service Time, and percentage commissions must still total 100% where that total is enforced. Changing a segment's time does not change the service's duration.

Delete a segment

  1. Navigate to Master data > Services, open the service, and on the General tab select Define Service Segments.
  2. Select the segment you want to remove.
  3. Delete it.
  4. Select Save in the dialog.

Important: A deletion is kept only when you select Save in the dialog. After removing a segment, the remaining segment times no longer add up to the Service Time, so adjust the remaining times β€” or add a replacement segment β€” before saving.

Change the order of segments

The order is assigned automatically in the sequence the segments are added, and there is no field in which you type an order number. To put the segments in a different order, remove them and add them again in the order you want, then select Save in the dialog.

Common segmented service examples

Multi-part facial

Segment Type Time
Cleansing and analysis Servicing Time 10 min
Exfoliation Servicing Time 10 min
Extraction Servicing Time 15 min
Mask and serum Processing Time 20 min
Moisturizing and SPF Finishing Time 5 min
Total 60 min

This set of segments fits a service whose Service Time is 60 minutes.

Hair coloring service

Segment Type Time
Consultation and mixing Servicing Time 10 min
Color application Servicing Time 30 min
Processing Processing Time 25 min
Rinse and condition Servicing Time 10 min
Blow-dry and style Finishing Time 20 min
Total 95 min

This set of segments fits a service whose Service Time is 95 minutes. The Processing segment carries no commission, and the Finishing Time segment is last and has a duration.

When segments cannot be edited

Custom service times set below the service level take precedence over segments, and they lock the segments.

  • If employee-level or job-level segment times exist for the service, the Service Segments dialog opens read-only: Add and Save are not shown, and a message explains why β€” "Segments cannot be defined since custom service time is configured for this service at employee level.", "Segments cannot be defined since custom service time is configured for this service at job level.", or "Segments cannot be defined since custom service time is configured for this service at both employee and job level."
  • If a custom service time is set for the service on a job or on an employee, the dialog does not open at all, and a message explains that segments cannot be defined.

To edit the segments in either case, remove the employee-level or job-level timing for this service first, then reopen the service and define the segments.

What to configure next

Required:

  • Save the service after saving the segments. This is required when the segments use Flat commission, so that the total shown in the service's read-only Commission field is kept. See Manage services.

Optional:

Tips

  • Settle the Commission Type before you add the first segment. The choice is locked for the whole service once a segment is in the grid, so changing from Percentage to Flat afterwards means removing every segment and starting over.
  • Keep percentage commissions at a 100% total even when your organization does not enforce it. Totals above or below 100% change what the providers on the appointment are paid relative to the service's own commission.
  • Plan the order before you add anything. Order is assigned in the sequence you add the segments, so work from the start of the service to the end β€” and remember that a Finishing Time segment has to be the last one.
  • Use segment names that front-desk and service staff recognize. Clear names make the treatment flow readable wherever segments appear.
  • Keep the number of segments modest. While there is no hard limit, services with more than six or seven segments become difficult to keep in agreement with the service's Service Time.
  • Test the booking flow. After defining segments, create a test booking to confirm the appointment occupies the full service duration as expected.
  • Review segment configuration periodically. If treatment protocols change, update the segment times β€” and the service's Service Time β€” so that the two continue to match.

Troubleshooting

Problem Resolution
Define Service Segments does not appear on the General tab. The service has not been saved yet β€” save it, reopen it, and look again. If the service is an add-on or a variant, segments are not available for it at all.
You see "You cannot add this service segment, as the total segment times will exceed the Service Time you've indicated." The segment you are adding would push the running total past the service's Service Time. Reduce the segment's Time, reduce the time on an existing segment, or increase the service's Service Time on the General tab.
Save in the dialog shows "The segment times must add up to the Service Time you've indicated." The segment times fall short of β€” or do not match β€” the service's Service Time. Adjust the segment times, or add another segment, so that the two agree exactly.
Save shows "Please ensure that total commission sums up to 100%". Percentage commissions across the segments do not total exactly 100%. Adjust the values until they do; a combined total of 0 is also accepted.
The Commission field is unavailable on a segment. The segment's Type is Processing Time. Processing Time segments cannot carry commission. Change the type, or leave the commission out for this segment.
Flat cannot be selected as the Commission Type. Flat is offered only when the service's own Commission Type is Flat amount. Change the service's commission type on the General tab, save the service, then reopen the dialog.
The Commission Type choice cannot be changed. The choice locks as soon as the first segment is added, because it applies to every segment of the service. Remove all the segments to unlock it.
The service's Commission field is read-only. The segments use Flat commission, so the field shows the total of the segment amounts. Save the service so that this total is kept.
The dialog opens without Add and Save, with a message about custom service time. Employee-level or job-level segment times exist for this service. Remove that timing first, then reopen the service and edit the segments.
The dialog does not open, and a message says segments cannot be defined. A custom service time is set for the service on a job or an employee. Remove that custom service time first, then define the segments.
Was this article helpful?
Your feedback helps us improve our documentation.