Pay periods and pay day
Configure your payroll schedule by setting up pay periods and the default pay day in Zenoti Integrated Payroll (ZIP). Pay periods define the frequency of payroll runs, while the pay day determines when employees receive their direct deposits after each pay period ends.
Audience: Payroll administrators who manage pay schedule configuration and run regular payroll cycles.
On this page
- Before you begin
- Pay period frequencies
- Configure the default pay day
- Run a regular payroll cycle
- Holiday auto-adjustment
- Processing timeline
- Tips
- Troubleshooting
- Related articles
Before you begin
Your business must be onboarded to ZIP. ZIP is enabled for your tenant by Zenoti's implementation team after you enroll.
You need the Configure Payroll Payouts permission to update pay period and pay day settings.
Permission: Configure Payroll Payouts — Required to view and update pay period frequency and default pay day settings. Admin path: Configuration > Security > Security roles > [your role] > Administrator > Payments > Configure Payroll Payouts
You need the Process Payroll Payouts permission to initiate and submit payroll runs.
Permission: Process Payroll Payouts — Required to run payroll, preview tax calculations, and submit payroll for processing. Admin path: Configuration > Security > Security roles > [your role] > Administrator > Payments > Process Payroll Payouts
Earnings must be calculated before initiating a payroll run. Run the Org-level Payroll Summary Report under Reports > Payroll Summary Report and use Calculate Commissions/Earnings to generate earnings data.
Pay period frequencies
ZIP supports the following pay period frequencies, configured at the business level during onboarding:
| Frequency | Description |
|---|---|
| Weekly | Payroll runs every week |
| Bi-weekly | Payroll runs every two weeks |
| Monthly | Payroll runs once per month |
| Custom | A custom frequency configured during onboarding |
Important: Pay periods are defined at the business level and apply uniformly across all mapped centers. You cannot set different pay period frequencies for individual centers.
Configure the default pay day
The pay day is set as a number of business days after the pay period ends:
- Navigate to Employee > Zenoti Integrated Payroll.
- Select Settings in the right-side menu.
- Select Payout settings.
- In the Default Pay Day field, enter the number of business days after the pay period ends (between 2 and 15 business days).
- Review the pay schedule preview to confirm pay dates look correct.
- Click Save.
Note: Changes to the default pay day take effect for the next pay period. The current pay period in progress is not affected.
Worked example: A bi-weekly pay period ends on Friday, November 14. The administrator sets the disbursement window to 3 business days. The resulting pay day is Wednesday, November 19. If November 19 were a federal holiday, ZIP would automatically shift the pay day to Thursday, November 20.
Run a regular payroll cycle
This procedure covers the end-to-end flow for a standard payroll run.
Step 1: Calculate earnings
- Navigate to Reports > Payroll Summary Report.
- Click Calculate Commissions/Earnings to generate earnings data for the current pay period.
Step 2: Initiate payroll
- Navigate to Employee > Zenoti Integrated Payroll.
- Select Payrolls in the right-side menu.
- Click Run Payroll, then click Proceed.
Important: Once payroll is initiated, invoice, attendance, and commission data is frozen. If you need to adjust any earnings before submitting, discard the draft, recalculate commissions and earnings, and reinitiate payroll.
Step 3: Review the Payroll Input screen
On the Payroll Input screen, review the following for each employee:
- Default earnings (service commissions, product commissions, hourly pay, salary)
- Custom earnings — click Add Custom Earnings to add one-time or supplemental earnings
- Reimbursements — click Add Custom Deductions to add reimbursements or deductions
Use the available filters to narrow the employee list to specific groups:
| Filter | What it controls |
|---|---|
| Center | Limits the view to employees at a specific center |
| Employment Type | Filters by regular employee or contractor |
| Onboarding Status | Shows employees by their onboarding completion state |
For multi-center organizations sharing the same pay period, select multiple centers to batch payroll across all selected centers in a single run.
Step 4: Preview taxes and deductions
- Click Preview to perform a dry run that calculates taxes and deductions without submitting.
- Review the calculated amounts for each employee.
- If the preview results require changes, click View data to return to the Payroll Input screen and adjust earnings.
- Optionally adjust the pay day for this run — for example, if the default pay day falls on a holiday and the automatic adjustment does not match your preferred date.
Step 5: Submit payroll
- Confirm that you are submitting before the deadline: one business day before payday, by 5 PM local center time.
- Click Submit to move the payroll from Draft to Pending status.
Important: If you miss the 5 PM submission deadline, you cannot process payroll for the scheduled pay day through the standard ACH flow. You can still pay employees on time by funding via Wire transfer for same-day settlement. See How to still pay employees on time after missing the payroll submission deadline for the recovery procedure.
The payroll status transitions follow this sequence: Draft → Pending → Processing → Paid (or Partially Paid if some employee payments fail).
Holiday auto-adjustment
When a scheduled pay day falls on a federal holiday, ZIP automatically adjusts the pay date to the next business day. No manual action is required. You can verify the adjusted pay day on the Preview screen before submitting payroll.
Processing timeline
The table below shows the timing for each stage of a standard payroll cycle after submission.
| Step | Timing |
|---|---|
| Pay period ends | As configured (weekly, bi-weekly, monthly, or custom) |
| Payroll submission deadline | One business day before payday by 5 PM local center time |
| ACH debits post (employer account) | Between 12 PM and 10 PM ET on the submission deadline day |
| ACH credits arrive (employee accounts) | By 9 AM local time on payday |
| Instant payments processed | Between 7:30 AM and 8:00 AM ET on payday |
If you miss the 5 PM submission deadline, you can still hit the scheduled pay day by funding via Wire transfer for same-day settlement. See How to still pay employees on time after missing the payroll submission deadline for the recovery procedure.
Tips
- Calculate earnings before initiating payroll. Run Calculate Commissions/Earnings from the Org-level Payroll Summary Report before starting a payroll run. Earnings data that is not calculated before initiation will not appear in the Payroll Input screen.
- Use the Preview step as a final check. The Preview dry run calculates taxes and deductions without submitting. Use it to catch discrepancies in earnings or employee data before the payroll is locked.
- Submit payroll early in the day. The 5 PM local center time deadline for submission leaves no buffer for technical delays. Submitting by midday on the deadline day gives time to resolve any last-minute issues without missing the pay date.
- Batch multi-center payroll in one run. If multiple centers share the same pay period, select all of them in the center filter on the Payroll Input screen to process a single batched payroll run instead of running each center separately.
- Verify pay day adjustments after configuring a new disbursement window. After saving a new default pay day setting, review the pay schedule preview on the Payout settings tab to confirm the resulting pay dates are correct before the next pay period begins.
Troubleshooting
The pay day I entered is not available. The disbursement window must be between 2 and 15 business days after the pay period ends. Values outside this range are not accepted. Confirm the number you entered falls within that range and click Save again.
The default pay day changed unexpectedly. If a scheduled pay day falls on a federal holiday, ZIP automatically moves it to the next business day. Check whether the original pay day coincided with a holiday. If the adjusted date does not work for your organization, you can manually override the pay day for a specific run during the Preview step before submitting.
Earnings are missing from the Payroll Input screen. Earnings are only available after Calculate Commissions/Earnings has been run for the current pay period. Navigate to Reports > Payroll Summary Report, run Calculate Commissions/Earnings, then reinitiate the payroll run. If an employee's earnings are still missing after recalculation, confirm the employee's onboarding status is complete and that the employee is mapped to the correct center.
Payroll was submitted but the status is still showing as Draft.
A payroll in Draft status has not yet been submitted. Click Submit on the Preview screen to move the payroll to Pending. If the button is unavailable, confirm you have the Process Payroll Payouts permission. If the permission is in place and the button remains unavailable, contact support@zenoti.com with your business name and FEIN in the subject line.
A submitted payroll needs to be corrected. If payroll has been submitted (status: Pending) and the submission deadline has not yet passed, you may be able to reopen it. See Reopen payroll after submission for the time-window rules and procedure. If the deadline has passed, see Payroll corrections in Zenoti integrated payroll for post-submission correction options.