ZenotiHelp

Prerequisites to run Zenoti Integrated Payroll

ZTZenoti Docs Team Updated October 27, 2026 11 min readGuide

Before you can submit your first payroll cycle in Zenoti Integrated Payroll (ZIP), seven prerequisites must be in place. This article walks through each one with the actual steps, the permission needed, and the expected duration so you know whether you can run payroll today or you have a few business days of setup ahead of you.

Audience: Payroll administrators preparing to run their first payroll in ZIP.


On this page


Before you begin

  • ZIP is enabled for your tenant by Zenoti's implementation team after you enroll. If you do not see Employee > Zenoti Integrated Payroll in your menu, contact support@zenoti.com with your business name and FEIN to confirm enablement.

  • Your user role must hold at least one of the following permissions. All three are actions on the Payments object under Administrator in Configuration > Security > Security roles:

    Permission: Configure Payroll Payouts β€” Required for business onboarding, bank account setup, tax setup, document access, and pay day configuration. Admin path: Configuration > Security > Security roles > [your role] > Administrator > Payments > Configure Payroll Payouts

    Permission: Process Payroll Payouts β€” Required for running and processing regular or off-cycle payroll. Admin path: Configuration > Security > Security roles > [your role] > Administrator > Payments > Process Payroll Payouts

    Permission: Access Payroll Payouts Reports β€” Required for viewing payroll journal and register reports. Admin path: Configuration > Security > Security roles > [your role] > Administrator > Payments > Access Payroll Payouts Reports

  • The user who grants these permissions to a role must themselves hold the Manage Security Roles permission. For the full grant procedure, see Enable permissions for Zenoti Integrated Payroll.

  • This article covers all seven prerequisites. Complete them in order β€” later steps depend on earlier ones being in place.


The seven prerequisites

# Prerequisite Permission Expected duration
1 ZIP enabled for tenant + ZIP permissions on your role Set by Zenoti's implementation team; permissions granted by Manage Security Roles holder Same day
2 Business onboarding (FEIN, signatory, locations) Configure Payroll Payouts 30–60 minutes for entry; up to 2 business days for Check Technologies verification
3 Bank account verified for funding Configure Payroll Payouts Same day (instant) or 1–4 business days (micro-deposit)
4 Tax setup signed (Form 8655 + jurisdictions) Configure Payroll Payouts Same day to 2 business days
5 Pay periods and pay day configured Configure Payroll Payouts 5 minutes
6 Compensation and earning types configured Configure Payroll Payouts 15–30 minutes per business
7 Employees onboarded and categorized Configure Payroll Payouts 5–10 minutes per employee, parallelizable

The Zenoti Implementation Status indicator on the dashboard transitions to Ready to run when all seven are complete. The total wall-clock time from start to first-payroll-eligible is typically 2 to 5 business days, dominated by the bank-verification dependency and the Check Technologies onboarding review.


Steps

1. Feature flag and permissions

ZIP is enabled for your tenant by Zenoti's implementation team after you enroll. If it is not yet enabled, no role can access ZIP regardless of permissions. If you do not see Employee > Zenoti Integrated Payroll in your menu and your role has the right permission, contact support@zenoti.com with your business name and FEIN to verify enablement.

Your user role must hold one of the three permissions listed in the Before you begin section above. For the full grant procedure, see Enable permissions for Zenoti Integrated Payroll.


2. Business onboarding completed

Business onboarding gathers the legal-entity information ZIP and Check Technologies need to file taxes and process payroll on your behalf. You walk through it once per business entity (FEIN).

What you need to have ready:

  • Federal Employer Identification Number (FEIN).
  • Legal business name and DBA (Doing Business As) name.
  • Certificate of incorporation.
  • Federal tax forms: prior Form 941, Form 940, Form W-4 templates, and a blank Form 8655 (Reporting Agent Authorization) ready to sign.
  • State tax IDs and State Unemployment Insurance (SUI) rates for every state where you have employees.
  • Authorized signatory information (name, title, contact details, signing authority).
  • Center-to-business mapping if your organization has multiple centers under one FEIN.

The procedure: Business onboarding walks through the multi-step onboarding flow. Plan for 30–60 minutes of administrator time for data entry, plus up to 2 business days for Check Technologies' verification of FEIN, signatory, and tax registrations.

If onboarding stalls: See the troubleshooting section in Business onboarding and the SLA expectations in Understand business setup status.


3. Bank account verified for funding

ZIP debits payroll funds from your business bank account before disbursing to employees. The account must be verified before any payroll cycle can submit.

Two verification paths:

  • Instant verification via Plaid through Check Technologies. You provide your online banking credentials; the connection is verified the same session. Fastest path; recommended if your bank supports it.
  • Manual micro-deposit verification. You provide routing and account numbers; Zenoti deposits two small amounts to the account within 1–2 business days; you return to ZIP and confirm the amounts. Total elapsed time is 1–4 business days.

Have your bank whitelist ACH (Automated Clearing House) Company ID 1209306000 to prevent ACH rejections at funding time.

Note: Each business enrollment supports one bank account per company. Center-level bank-account mapping is not available β€” all centers under the same business entity fund from the same account.

For the procedure, see Manage employee bank accounts.


4. Tax setup signed and authorized

Tax setup gives Check Technologies the authority to file federal and state taxes on your behalf. It must be complete before payroll can submit, because payroll triggers tax-deposit creation.

What you do:

  1. Navigate to Employee > Zenoti Integrated Payroll and open the right-side menu.
  2. Select Settings, then go to Tax setup.
  3. Verify your FEIN.
  4. Confirm tax jurisdictions for federal, state, and any local jurisdictions where employees work.
  5. Sign Form 8655 (Reporting Agent Authorization) through the Check Technologies embedded component.
  6. Complete any state-specific authorization forms.

Expected duration: Most jurisdictions clear same-day. Some state registrations or Power-of-Attorney filings can take 1–2 business days. If a jurisdiction returns a blocked-reason code (such as already_filed or poa_failure), see the resolution paths under Tax compliance and Manage historical tax liabilities with Zenoti integrated payroll.


5. Pay periods and pay day configured

You must set the cadence at which payroll runs.

Pay frequencies supported:

  • Weekly β€” Payroll runs every week.
  • Bi-weekly β€” Payroll runs every two weeks (14-day periods).
  • Semi-monthly β€” Payroll runs twice per month, typically on the 15th and the last day of the month.
  • Monthly β€” Payroll runs once per month.

What you configure:

  • Disbursement days. The number of business days after the pay period ends and the pay day. Range: 2 to 15. Most businesses use 5 (one business week).
  • First payday. The date of your first payroll run on this cadence.

The procedure: Set or update default pay day in Zenoti Integrated Payroll.

Important: You must submit each payroll cycle at least one business day before payday by 5 PM local center time. Pick disbursement days that give you enough buffer to review and submit on time. If you miss the deadline, see How to still pay employees on time after missing the payroll submission deadline for the wire-transfer recovery path.


6. Compensation and earning types configured

ZIP needs to know how each employee is paid (hourly, salary, commission, tips) and which Zenoti pay components map to which payroll category for tax treatment.

What you configure:

  • Employee compensation: hourly rate, salary, commission structure, base salary plus commission, etc.
  • Earning types: the mapping between Zenoti pay components (regular wages, overtime, commission, tips, bonus, expense reimbursement, etc.) and payroll categories. Most businesses use the preset mappings; add custom earning types only if your business has specialized pay structures.

The procedure: Earning types walks through reviewing the preset mappings and adding custom ones.

Note: Compensation is set per employee during employee onboarding; earning types are set once per business and apply across all employees. Both must be in place before payroll runs.


7. Employees onboarded and categorized

Each employee who should be paid through ZIP must be categorized as Regular (W-2) or Contractor (1099), and their payroll inclusion must be turned on.

Important: Employment type cannot be changed after the first payroll is processed. If a type change is required post-payroll, create a new employee profile. For the create-new-profile flow, see Employment Type Change β€” Center-Level Classification and Onboarding Reset.

What you do:

  • Categorize each employee in the Employees section of the dashboard.
  • For Regular employees, ensure tax-form information is collected (typically through their MyZen self-service onboarding, which collects the W-4). For contractors, collect the Form W-9 information.
  • Turn on payroll inclusion for everyone you intend to pay this cycle.

The procedure: Employee onboarding and tracking covers admin-side onboarding via the web app; Onboard an employee through the MyZen app covers self-service onboarding through the employee mobile app.

Note: One employee's incomplete onboarding blocks that employee from the payroll run. Confirm all employees intended for the cycle show a completed onboarding status before initiating payroll.


Zenoti Implementation Status: Ready to run

When all seven prerequisites complete, the Zenoti Implementation Status indicator on the Setup Zenoti Integrated Payroll page transitions to Ready to run. You can now initiate your first payroll cycle.

If Zenoti Implementation Status is stuck on Setup in progress or Needs Attention, select View progress next to the business row to see the next pending task, and refer to Understand business setup status for the state-machine and SLA expectations.

The two status indicators track different things:

Indicator What it tracks
Customer Onboarding Status Your completion of the business-onboarding checklist items. Values: Incomplete, Needs Attention, Completed.
Zenoti Implementation Status Zenoti's readiness check before your first payroll run. Values: Needs Attention, Setup in progress, Ready to run, In Review, Live.

Both must reach their final state before the first payroll cycle can be submitted.


Submission deadline reminder

Even after Ready to run, every payroll cycle must be submitted at least one business day before payday by 5 PM local center time for ACH funding to settle in time. If you miss the deadline, see How to still pay employees on time after missing the payroll submission deadline for the wire-transfer recovery path.


Tips

  • Prepare your data before starting onboarding. Having FEIN, certificate of incorporation, federal and state tax forms, and signatory information ready in one place cuts the active onboarding time from hours to minutes.
  • Use instant bank verification (Plaid) if your bank supports it β€” same-day completion vs 1–4 business days for micro-deposit verification.
  • Whitelist ACH Company ID 1209306000 with your bank before bank verification, so funding and refunds don't reject.
  • Onboard in a desktop-class browser; the embedded Check Technologies signatory and bank-verification components don't always render correctly in mobile browsers.
  • Plan your first payroll cycle for 5–7 business days after starting onboarding to absorb the bank-verification and Check Technologies review windows.
  • Onboard employees in parallel with completing tax setup and bank verification β€” employee onboarding does not depend on either of those steps being finished first.

Troubleshooting

The most common stalls during prerequisite setup:

  • Menu is missing. ZIP has not been enabled for your tenant by Zenoti's implementation team, or your role lacks a ZIP permission.
  • Bank verification stalled. Either the bank hasn't whitelisted ACH Company ID 1209306000, or you're waiting on micro-deposits that haven't arrived.
  • Tax registration blocked. A blocked-reason code (such as already_filed or poa_failure) is shown on the dashboard. Resolution depends on the code.
  • Zenoti Implementation Status stuck. Select View progress on the business row to see the specific pending check.
  • Onboarding loses progress. Browser cache or session expiry. Clear cache, sign back in.
Problem Resolution
Employee > Zenoti Integrated Payroll menu does not appear Confirm ZIP is enabled for your tenant (contact support@zenoti.com with your business name and FEIN) AND your role has at least one ZIP permission per Enable permissions for Zenoti Integrated Payroll.
Bank verification micro-deposits don't arrive within 2 business days Confirm your bank has whitelisted ACH Company ID 1209306000. Try instant verification (Plaid) instead. If still stuck, contact support@zenoti.com.
State tax registration returns a blocked-reason code See Tax compliance for code-specific resolution. Most common codes: already_filed (prior filing exists for the period), poa_failure (Power of Attorney pending), inactive_account (state account not active).
Zenoti Implementation Status stuck on Setup in progress for more than 5 business days Select View progress on the business row to see the specific pending check. Bank verification and tax-jurisdiction registration are the most common stalls. Contact support@zenoti.com with your business name and FEIN if the wait exceeds the SLA in Understand business setup status.
Onboarding flow doesn't save progress between sessions Browser cache or session expiry. Sign out, clear cache, sign back in, and resume from the last completed step.

Frequently asked questions

How long does it take from start to running my first payroll? Typically 2 to 5 business days. The bank-verification step (1–4 business days for micro-deposit) and the Check Technologies onboarding review (up to 2 business days) drive the timeline. Same-day completion is possible if you use instant bank verification and your jurisdictions clear immediately.

Can I migrate from another payroll provider (ADP, Gusto, Paychex)? Yes. ZIP supports free data migration with guided onboarding, including year-to-date history upload for consolidated W-2 / 1099 generation. See Preliminary review for Zenoti Integrated Payroll setup β€” the migration adds approximately 2 business days to the timeline for Check Technologies' Preliminary Review.

Do I need a separate FEIN for each business location? No. Each business entity in ZIP supports one FEIN with multiple centers underneath it. If your organization has multiple legal entities (each with its own FEIN), you set them up as separate businesses in ZIP and switch between them with the business filter.

Can multi-state operations be handled in one business? Yes β€” ZIP handles all 50 U.S. states plus the District of Columbia within one business entity, as long as all employees are paid under one FEIN. State-tax registrations are configured per state during tax setup.

What if my unemployment tax rate changes mid-year? Update it under Settings > Tax setup. See Update your unemployment tax rate. The new rate applies to the next payroll cycle after the change.

Why is my Zenoti Implementation Status stuck on "Setup in progress"? Select View progress on the business row on the Setup Zenoti Integrated Payroll page to see the specific pending task. Most stalls are on bank verification (waiting for micro-deposits) or tax setup (waiting for a state's authorization). If a status is stalled longer than the expected duration in the table at the top of this article, contact support@zenoti.com with your business name and FEIN.


Was this article helpful?
Your feedback helps us improve our documentation.