Enable the new booking experience
Availability: The New Booking Experience is currently in beta. For the stable experience, see Booking surfaces overview.
The New Booking Experience replaces the Booking Wizard for organizations that opt in. Enablement follows a strict two-level sequence: the organization-level toggle must be on before any center can enable the experience for itself. When the organization toggle is off, the center-level toggle is not visible β if a center cannot find it, the organization setting is the first thing to check.
Audience: Administrators rolling out the New Booking Experience to one or more centers.
On this page
- Before you begin
- What this setting does
- Steps
- Step 1: Enable the New Booking Experience at the organization level
- Step 2: Confirm prerequisites
- Step 3: Enable the New Booking Experience at each center
- Step 4: Verify
- Default value
- Channel selection (Web and ZMA)
- Sync settings
- Shifts support
- Rollout default
- Comparison: Appointment Book vs Booking Wizard vs New Booking Experience
- Dependent settings
- Tips
- Troubleshooting
- An access-denied message appears on create or edit, but permissions look correct
- The edit panel opens blank and never renders
- Block time disappears on the checked-in transition and returns on refresh
- Some staff still see the old wizard after turning the setting on
- Right-click opens the legacy dialog even though the New Booking Experience is enabled
- I want to turn it off temporarily
Before you begin
- Decide whether you want to roll out across the whole organization at once, or pilot at a single test center first. A per-center rollout is supported, but only after the organization-level toggle is on. The organization toggle is the gate β without it, no center has the option to enable the experience.
- Communicate the change to front desk staff before turning it on. The booking flow, screen layout, and button labels are different from the Booking Wizard.
- Plan for a brief training session β the New Booking Experience has six explicit appointment types (Single booking, Couples, Group, Family, Surprise, Virtual) instead of a single "appointment with options" form.
Permission: Only super-admins and admins with the Configure organization settings permission can change the organization-level setting. Admin path: Configuration > Security > Security roles > [your role] > Organization > Configure organization settings
The navigation paths for the settings are:
- Organization level: Configuration > Appointments > Personalization > Interface > Enable New Booking Experience
- Center level: Configuration > Appointments > Essentials > Enable New Booking Experience (visible only when the organization toggle is on)
What this setting does
When Enable New Booking Experience is on at both the organization and center levels:
- The Book icon on the appointment book toolbar opens the New Booking Experience.
- Right-click β New Appointment opens the New Booking Experience (subject to the context-menu routing setting).
- The Edit and Rebook actions open the New Booking Experience.
- All booking flows β create, edit, rebook, waitlist, move β use the new screens.
When the organization setting is off, the center-level toggle is not visible and all entry points open the Booking Wizard. When the organization setting is on but a center's toggle is off, that center continues to use the Booking Wizard while other centers with the toggle on use the New Booking Experience.
Steps
Important: You must enable the New Booking Experience at the organization level before any center can enable it. The center-level toggle is not visible until the organization toggle is on. Complete Step 1 before proceeding to Step 3.
Step 1: Enable the New Booking Experience at the organization level
- Sign in as an administrator with the Configure organization settings permission.
- Navigate to Configuration > Appointments > Personalization > Interface.
- Locate Enable New Booking Experience.
- Toggle the setting to on.
- Select Save.
Once this is done, the center-level toggle becomes visible at each center. No center is automatically enabled β each center must be turned on individually (Step 3).
Step 2: Confirm prerequisites
Before enabling centers, confirm the following:
- All centers you plan to enable have at least one provider with a current schedule.
- The service catalog is up to date β services that should be bookable are flagged as Active.
- Permissions are configured: Add Appointment, Edit Appointment, Cancel Appointment, and (where used) Override permissions are assigned to the appropriate roles.
- For Couples, Family, or Parallel-services usage, the relevant prerequisite settings are also enabled β see Configure couples and family booking and Configure parallel services and Combine services.
Step 3: Enable the New Booking Experience at each center
With the organization toggle on, enable the experience at each center you want to roll out:
- Navigate to Configuration > Appointments > Essentials at the target center.
- Locate New Booking Experience (requires relaunch to apply).
- Toggle the setting to on.
- Select Save.
- Relaunch the appointment book for the change to take effect at that center.
Repeat for each center. Centers where you leave the toggle off continue to use the Booking Wizard β this is the supported approach for a staged, center-by-center rollout.
Step 4: Verify
- Open the appointment book at an enabled center and click the Book icon β it should open the New Booking Experience landing screen.
- Right-click an empty slot and select New Appointment β same.
- Open an existing appointment and click Edit β same.
If any of these still open the Booking Wizard, check that the context-menu routing setting is also configured. See Configure the New Booking Experience entry points.
Default value
Off. The setting must be turned on explicitly at both the organization and center levels. Existing organizations continue to use the Booking Wizard until an administrator enables the new experience.
Channel selection (Web and ZMA)
After enabling the New Booking Experience at a center, you can configure which booking channels use it. Navigate to:
Configuration > Appointments > Essentials > New Booking Experience Channels (at a center)
Two checkboxes appear:
| Channel | Description |
|---|---|
| Web | Enables the New Booking Experience for bookings made through the admin web interface. |
| ZMA (Zenoti Mobile App) | Enables the New Booking Experience for bookings made through Zenoti Mobile. |
Select one or both channels to control which surfaces use the new experience.
Note: The Store booking channel is not supported in the New Booking Experience. Bookings initiated from the Store channel continue to use the Booking Wizard regardless of this setting.
Sync settings
When both the appointment book and the New Booking Experience are active, you can keep their date views synchronized. Navigate to:
Configuration > Appointments > Essentials > Sync appointment book and new booking experience on date changes (at a center)
Two toggles are available:
| Toggle | Description |
|---|---|
| Sync appointment book changes to new booking experience | When a date changes in the appointment book, the New Booking Experience auto-updates to show the same date. |
| Sync new booking experience changes to appointment book | When a date changes in the New Booking Experience, the appointment book auto-updates to show the same date. |
Important: Sync applies to date navigation only. It does not sync full appointment data, provider selections, or booking state between the two surfaces.
Shifts support
Shifts are fully supported in the New Booking Experience. Providers with configured shift schedules appear correctly in the New Booking Experience booking flow. No additional configuration is required to use shifts.
Rollout default
New businesses that go live on Zenoti on or after April 29, 2025 receive the redesigned appointment book as their default experience. Organizations that went live before this date continue to use the previous appointment book until an administrator enables the redesigned version.
Comparison: Appointment Book vs Booking Wizard vs New Booking Experience
| Feature | Legacy Appointment Book + Booking Wizard | New Booking Experience |
|---|---|---|
| Booking surface | Full-page child window (Booking Wizard) | Slide-in panel (stays alongside calendar) |
| Booking types | Implicit (options appear after flow starts) | Explicit selection: Single, Couples, Group, Family, Surprise, Virtual |
| Lead | Service-first always | Service-first or Provider-first (your choice) |
| Guest selection | During booking flow | Optional at landing screen (pre-fills profile data) |
| Provider availability | Grid view; no availability badges | Availability badges (Available today / Filling up / Booked) |
| Slot reservation | No countdown | Countdown timer holds the slot while you finish |
| Add-ons | Inline prompts after service selection | Dedicated side sheet with mandatory/optional separation |
| Shifts support | Yes | Yes |
| Channels | Web, ZMA, Store | Web, ZMA only (Store not supported) |
| Booking entry | Right-click + Book icon | Book icon, right-click, guest profile Book Appointment |
| Move restrictions | Blocked when payments/redemptions exist | None β moves work regardless of payment or redemption status |
Dependent settings
| Setting | Why it matters |
|---|---|
| Context-menu routing | Controls whether right-click β New Appointment opens the New Booking Experience or the Booking Wizard. Recommended to align with this setting. |
| Couples booking | Required if any of your services are couples-eligible and you want the Couples appointment type. |
| Family booking | Required if you want the Family appointment type. |
| Parallel services | Required if you want the Combine services control to schedule services in parallel. |
Tips
- Pilot before a full rollout. When possible, test in a single center for a week before turning on the setting organization-wide. This catches surprises like service-catalog quirks before they affect every center.
- Coordinate with marketing communications. If your organization sends booking confirmations from a template that references the old screen names or buttons, update the templates before turning on the setting.
- Train staff on the appointment-type selector. The largest behavior change is the explicit choice of Single booking / Couples / Group / Family / Surprise / Virtual at the start of every booking. The Booking Wizard handled these implicitly through downstream prompts.
Troubleshooting
If you encounter issues after enabling the New Booking Experience, the sections below describe common symptoms and how to address them.
An access-denied message appears on create or edit, but permissions look correct
Before escalating, re-verify the symptom in your own signed-in session β not in a Zenoti Support session and not while signed in to more than one organization simultaneously. Access-denied messages that appear only in a Support session or only when a user holds access to multiple organizations are environment artifacts, not permission faults.
If the message persists in your own session with correct permissions, turn the New Booking Experience off for the affected center as an interim rollback while you investigate:
- Navigate to Configuration > Appointments > Essentials at the affected center.
- Toggle New Booking Experience (requires relaunch to apply) to off and select Save.
This restores the Booking Wizard for that center without affecting other centers.
The edit panel opens blank and never renders
Re-verify the symptom in your own signed-in session. If the blank panel occurs only in a Zenoti Support session or only when the signed-in user holds access to more than one organization, the cause is environmental rather than a product defect.
If the blank panel persists in your own session, use the center-level toggle to turn the New Booking Experience off for that center as an interim rollback while the case is investigated:
- Navigate to Configuration > Appointments > Essentials at the affected center.
- Toggle New Booking Experience (requires relaunch to apply) to off and select Save.
Block time disappears on the checked-in transition and returns on refresh
This is a known display behavior. Block time entries that disappear when an appointment transitions to checked-in status will reappear on the next page refresh. No data is lost. If this behavior affects your workflow, turn the New Booking Experience off at the center level as an interim measure while the case is investigated:
- Navigate to Configuration > Appointments > Essentials at the affected center.
- Toggle New Booking Experience (requires relaunch to apply) to off and select Save.
Some staff still see the old wizard after turning the setting on
The label on the center-level toggle reads New Booking Experience (requires relaunch to apply). Active sessions do not pick up the new setting until the appointment book is relaunched. Ask staff to close and reopen the appointment book rather than refreshing the browser tab.
Right-click opens the legacy dialog even though the New Booking Experience is enabled
The right-click path has its own routing setting. See Configure the New Booking Experience entry points.
I want to turn it off temporarily
You can toggle the center-level setting off at any time. Appointments already created in the New Booking Experience remain on the appointment book and continue to function normally. Turning the organization-level setting off disables the center-level toggle for all centers simultaneously and reverts every center to the Booking Wizard.