ZenotiHelp

Manage appointment status changes

ZTZenoti Docs Team Updated September 16, 2026 8 min readGuide

This article explains how to change appointment statuses during the guest visit β€” from confirmation through check-in, cancellation, no-show, void, and reopening a closed appointment.

Audience: Front desk staff who manage guest appointment status during daily operations.


On this page


Before you begin

  • You need the Edit permission under Appointments to change appointment status.

    Permission: Edit β€” Required to change appointment status. Admin path: Configuration > Security > Security roles > [your role] > Appointments > Edit

  • The appointment must be in an appropriate status before certain transitions are available (for example, you cannot confirm an already checked-in appointment).

  • If your center uses cancellation or no-show fee rules, confirm that the fee configuration is set up before cancelling or marking no-shows. For settings overview, see Configurations.

Steps

Use the following procedures to change appointment statuses during the guest visit.

Confirm an appointment

Confirming an appointment signals that the guest's booking is acknowledged and expected to proceed.

  1. Right-click the appointment in the Appointment Book to open the context menu.
  2. Click Confirm.
  3. The appointment status changes from New to Confirmed. The card color updates accordingly.

To reverse a confirmation, see Undo a status change.

Check in a guest

Check in a guest when they arrive at the center.

Note: Do not confuse guest check-in (marking a guest as arrived for their appointment) with employee check-in (clocking in for a shift). This procedure covers guest check-in only.

  1. Right-click the appointment to open the context menu.
  2. Click Check In.
  3. The appointment status changes to Checked In.

Tip: You can also check in a guest directly from the Check In/Out button in the right navigation panel, which is faster during busy arrival periods.

To reverse a check-in, see Undo a status change.

Cancel an appointment

Important: Review whether a cancellation fee applies before cancelling. If cancellation fee rules are configured, Zenoti evaluates the applicable fee at the time of cancellation and displays it for your confirmation before proceeding.

On the legacy Appointment Book:

  1. Right-click the appointment to open the context menu (accessed from the provider's overflow menu).
  2. Click Cancel.
  3. If a cancellation fee applies, review the fee amount and confirm.
  4. Select a cancellation reason if prompted.
  5. Confirm the cancellation in the dialog that appears.

On the redesigned Appointment Book:

  1. Click the appointment to open the appointment view.
  2. Select Cancel from the status selector at the upper right of the appointment view.
  3. If a cancellation fee applies, review the fee amount and confirm.
  4. Select a cancellation reason if prompted.
  5. Confirm the cancellation.

The appointment status changes to Cancelled.

Cancellation reasons

When a cancellation reason is required, staff select from a list configured by your administrator. Each reason has:

  • Name β€” The display label staff select from the picker.
  • Code β€” A short alphanumeric identifier used for reporting and cross-system reconciliation. Codes must be unique within the organization.
  • Description (optional) β€” Internal context shown to administrators; never displayed to guests.
  • Active toggle β€” Inactive reasons do not appear in the picker but are retained for historical records.
  • Use in online booking toggle β€” When enabled, the reason is also available to guests cancelling through self-service channels such as the Webstore or Zenoti Mobile App (ZMA).

Admin setup: Your administrator maintains the cancellation reason list at Configuration > Appointments > Cancellation reasons.

Cancellation fee rules

If your center has cancellation fee rules configured, Zenoti checks whether the cancellation falls within the fee window before processing. If a fee applies:

  1. Zenoti displays the calculated fee for your review.
  2. Confirm to proceed β€” the fee is added to the guest's invoice.
  3. If you have the Override Cancellation Rules permission, you can waive the fee before confirming.

Group cancellations

If your organization has group invoice cancellation enabled, cancelling one appointment in a group cancels all items in the group. Zenoti displays a confirmation prompt before proceeding.

Mark an appointment as no-show

On the legacy Appointment Book:

  1. Right-click the appointment to open the context menu (accessed from the provider's overflow menu).
  2. Click No Show.
  3. Confirm the action.

On the redesigned Appointment Book:

  1. Click the appointment to open the appointment view.
  2. Select No Show from the status selector at the upper right of the appointment view.
  3. Confirm the action.

The appointment status changes to No Show. If a no-show fee applies, Zenoti calculates and displays the fee before you confirm β€” the same fee evaluation flow as cancellation applies.

If waitlist V2 is enabled for your center, an open slot notification is triggered for waitlisted guests who match the freed slot.

No-show reasons

Your administrator can configure a list of no-show reasons. When the Record a reason for no-show appointments setting is enabled, selecting a reason is required before the status change is saved.

Each no-show reason has:

  • Name β€” The display label staff select from the picker.
  • Code β€” A short alphanumeric identifier used for reporting and cross-system reconciliation. Codes must be unique within the organization.
  • Description (optional) β€” Internal context shown to administrators; never displayed to guests.
  • Active toggle β€” Inactive reasons do not appear in the picker but are retained for historical records.
  • Use in online booking toggle β€” When enabled, the reason is exposed to guests in self-service cancellation flows.

Admin setup: Your administrator maintains the no-show reason list at Configuration > Appointments > No-show reasons.

Void an appointment

Voiding permanently removes the appointment record from operational history. Use Void only when an appointment must be removed from operational history β€” for example, a billing correction or a test appointment created in error. Use Cancel for standard end-of-booking flows.

Prerequisite: The appointment must be in Paid status before Void is available. If the appointment is not yet paid, complete the checkout first, then void if required.

  1. Right-click the appointment to open the context menu.
  2. Click Void. The option is only visible when the appointment status is Paid.
  3. Confirm the void action.

Reopen a closed appointment

If an appointment was closed or cancelled in error, you can reopen it.

  1. Right-click the appointment to open the context menu.
  2. Click Reopen (or Reopen Group Bill for group appointments).
  3. Confirm the action.

The appointment returns to its previous active status.

Undo a status change

If you change an appointment's status by mistake, you can reverse it with a single Undo action. Undo is supported for the following status changes:

  • Undo Check-In β€” Returns the appointment to Confirmed or New.
  • Undo Confirm β€” Returns the appointment to New.
  • Undo Start β€” Returns service progress to Not Started.
  1. Right-click the appointment to open the context menu.
  2. Click Undo. The Undo option appears only after a status has been changed; it returns the appointment to its previous status.

Note: Once you click Start, the service timer begins. Undo Start reverts the progress status but does not reset elapsed time. Use this action promptly if a service was started in error.

Lock an appointment

Locking prevents other staff from editing an appointment while you are working on it.

  1. Right-click the appointment to open the context menu.
  2. Click Lock to lock the appointment. A lock icon appears on the card.
  3. For appointments that are part of a group booking, the system asks whether to lock only this appointment or all appointments in this group. Choose the option that matches your intent.

To unlock, right-click the appointment and click Unlock.

Delete an appointment

Deleting is distinct from cancelling or voiding β€” it removes the appointment from operational records and requires a deletion reason. Use Delete only when an appointment was created in error and never represented a real booking (for example, a duplicate row created during a system test).

Permission: Deleting requires the Delete permission under Appointments. Most front-desk roles do not have this permission by default. Admin path: Configuration > Security > Security roles > [your role] > Appointments > Delete

  1. Right-click the appointment to open the context menu.
  2. Click Delete.
  3. On the Delete Appointment screen, select the reason for deletion from the configured list.
  4. Add Comments and click Save.

Deletion reasons

Each deletion reason has:

  • Name β€” The display label staff select from the picker.
  • Code β€” A short alphanumeric identifier used for reporting and cross-system reconciliation. Codes must be unique within the organization.
  • Description (optional) β€” Internal context shown to administrators; never displayed to guests.
  • Active toggle β€” Inactive reasons do not appear in the picker but are retained for historical records.

Admin setup: Your administrator maintains the deletion reason list at Configuration > Appointments > Deletion reasons.

The appointment is removed from the calendar and from operational reports.

Tips

  • Use Confirm before busy periods. Confirming appointments the day before reduces no-shows and gives guests a clear signal their booking is expected.
  • Check cancellation fee rules before cancelling. If your center charges cancellation fees within a certain window, cancelling outside that window avoids the fee entirely. Review the fee window with your administrator if you are unsure.
  • Use Lock when handing off. If you are mid-process on an appointment and need to step away, lock it to prevent a colleague from accidentally editing it at the same time.
  • Prefer Cancel over Delete for real bookings. Delete is for appointments that should never have existed. Cancel preserves the guest's history and triggers any applicable fee or waitlist logic.
  • No-show reasons support reporting. Selecting a specific no-show reason (rather than a generic one) helps your manager identify patterns β€” for example, whether no-shows cluster around a particular service type or time of day.

Troubleshooting

The Cancel or No Show option does not appear in the context menu.

The appointment may already be in a terminal status (Cancelled, No Show, Void, or Closed). Right-click the appointment and check the current status shown on the card. If the appointment is Closed, use Reopen first, then cancel.

A cancellation fee appeared that I did not expect.

Your center has cancellation fee rules configured. The fee applies when a guest cancels within the configured window (for example, less than 24 hours before the appointment). If you have the Override Cancellation Rules permission, you can waive the fee in the confirmation dialog. If you do not have this permission, contact your manager.

The Void option is not visible.

Void is only available when the appointment status is Paid. If the appointment has not been paid, complete the checkout in Point of Sale first. For payment processing, see Point of Sale.

The Undo option is greyed out or not visible.

Undo is only available immediately after a status change and only for Check-In, Confirm, and Start transitions. If the appointment has progressed further (for example, the service is already Complete), Undo is no longer available for earlier steps.

I deleted an appointment by mistake.

Deletion cannot be undone from the appointment book. Contact your administrator, who may be able to restore the record depending on your organization's data retention configuration.

The no-show reason picker is not appearing.

Your organization may not have the Record a reason for no-show appointments setting enabled, or no active no-show reasons are configured. Contact your administrator to add reasons at Configuration > Appointments > No-show reasons.

Was this article helpful?
Your feedback helps us improve our documentation.