ZenotiHelp

Set up a pole display

ZTZenoti Docs Team Updated September 12, 2026 1 min readGuide

A pole display is a customer-facing screen positioned at the front desk that shows appointment and transaction information to guests during check-in or checkout. This article explains how to configure a pole display for use with the Appointment Book.

Before you begin

  • You need a compatible pole display device connected to the front desk workstation.
  • You need administrator access to configure hardware integrations in Zenoti.

Permission: You need the Edit permission under Configuration to enable hardware display settings.

Steps

Enable the pole display

  1. Connect the device to a USB port on the computer.
  2. Navigate to Configuration and open the Point of Sale or Hardware settings for your center.
  3. Locate the Pole Display section.
  4. Enable Pole Display for the center.
  5. Click Save.

Supported hardware and browsers: The supported pole display device is the XP8200 U POS-X, connected over USB. The pole display works on Chrome, Edge v103, and Opera v89.

Verify the pole display connection

  1. Open the Appointment Book at a front desk workstation with the pole display connected.
  2. Open or check in a test appointment.
  3. Confirm that guest and appointment details appear on the pole display screen.

Tip: If the pole display does not show information, verify that the device driver is installed on the workstation and that the device is connected to a working USB port. Confirm you are using a supported browser (Chrome, Edge v103, or Opera v89).

Customize pole display messages

Some pole display configurations allow you to set a default idle message shown when no transaction is in progress.

  1. Navigate to Configuration and open the Point of Sale settings.
  2. In the Pole Display section, enter the desired Idle message text (for example, the center name or a welcome greeting).
  3. Click Save.
Was this article helpful?
Your feedback helps us improve our documentation.