ZenotiHelp

Mirror Mode β€” Kiosk App Support

ZTZenoti Docs Team Updated October 17, 2026 6 min readGuide

Mirror mode lets the Zenoti Mobile App display a guest-facing invoice and payment experience on a second screen β€” typically an iPad β€” while an employee manages the transaction on the primary POS screen. This article explains how to use mirror mode during a transaction, including tip entry, donation collection, and payment flows.

Audience: Front desk employees who process guest payments using a paired iPad in mirror mode.

Before you begin

  • Mirror mode is available on iPad and Android tablet only. It is not supported on iPhone or Android phone.
  • Your organization must have mirror mode enabled. Contact your administrator if the option is not available.
  • The cash register assigned to your Zenoti Mobile App session must have Enable Invoice Mirroring enabled. For POS configuration, see the relevant articles in front-desk-point-of-sale.
  • The iPad used as the mirror screen must have:
    • Auto-Lock set to Never (Settings > Display & Brightness > Auto-Lock > Never)
    • Safari not restricted (Settings > General > Restrictions β€” if Restrictions are enabled, disable the Safari restriction so the mirror page can load)
    • A stable Wi-Fi connection on the same network as the primary device
    • HTTPS access to your organization's Zenoti URL
  • Supported payment processors for mirror mode payments: Stripe Bluetooth card readers and Cloud payment (such as Element Express). Payments initiated through unsupported processors β€” including TriPOS and Adyen β€” will be aborted, and the primary POS screen will be notified.

Permission: You need access to a cash register with invoice mirroring enabled to use mirror mode. Contact your administrator to verify your register configuration.

Steps

Set up the mirror screen

  1. On the iPad that will serve as the guest-facing screen, open Safari.
  2. Navigate to your organization's Zenoti URL followed by /mirror (for example, https://yourorg.zenoti.com/mirror).
  3. The mirror screen loads and enters guest mode automatically. The screen displays a waiting state until a transaction is initiated from the primary device.

Note: The mirror screen remains in guest mode for the duration of the active session. Guest mode exits automatically when the mirror screen is dismissed.

Initiate a payment from the primary device

  1. On the primary device running the Zenoti Mobile App, open the guest's appointment and proceed to the invoice.

  2. Select the cash register that has Enable Invoice Mirroring configured.

    Important: The cash register selected on the primary device must match the register linked to the mirror screen. If the wrong register is selected, the mirror screen will not display the payment flow. Verify register names β€” register names are set by your organization (for example, "New Jersey-1").

  3. Tap Credit/Debit to initiate a card payment.

  4. Tap Collect Tips if tip collection is part of the payment flow.

  5. The primary device displays a Present Card prompt on the iPad. The mirror screen simultaneously updates to show the guest-facing payment interface.

  6. Monitor real-time payment progress on the primary device as the guest interacts with the mirror screen.

Collect a tip or donation on the mirror screen

The mirror screen displays suggested tip amounts and a donation option for the guest to select.

  1. The guest reviews the invoice summary displayed on the mirror screen.
  2. The guest selects a tip amount or enters a custom tip.
  3. If donation collection is enabled for your organization, the guest can also select a donation amount.
  4. The guest confirms their selections on the mirror screen.

Note: Tip and donation values reset automatically at the start of each new invoice. Values from a previous transaction never carry over to the next guest.

Process the payment on the mirror screen

  1. After tip and donation selections are confirmed, the mirror screen prompts the guest to present their card to the Stripe Bluetooth card reader.
  2. The guest taps, inserts, or swipes their card on the card reader.
  3. Payment status updates in real time on both the mirror screen and the primary device.
  4. When payment is complete, the mirror screen returns to its waiting state, ready for the next transaction.

Important: If you need to cancel an in-progress payment β€” for example, if a guest changes their mind β€” turn off the mirror display from the primary device. Turning off the mirror display aborts any in-flight payment transaction and notifies the primary POS screen. The transaction does not complete.

Exit mirror mode

  1. From the primary device, send the command to turn off the mirror display. The mirror screen exits guest mode and returns to an inactive state.
  2. Alternatively, if the guest session ends naturally after payment completion, the mirror screen exits guest mode automatically.

Worked example: A guest checks out for a facial service totaling $85.00. The employee on the primary device selects the "Front Desk-1" register, taps Credit/Debit, then taps Collect Tips. The mirror screen displays the $85.00 invoice summary and three suggested tip amounts: $10.00 (12%), $13.00 (15%), and $17.00 (20%). The guest taps the $13.00 tip option and a $2.00 donation. The mirror screen prompts the guest to present their card. The guest taps their card on the Stripe Bluetooth card reader. The primary device confirms payment of $100.00 ($85.00 + $13.00 tip + $2.00 donation). The mirror screen resets to its waiting state.

Tips

  • Confirm the iPad's Auto-Lock is set to Never before opening a shift. If the iPad locks during a transaction, the mirror screen session is interrupted and the guest will not see the payment prompt.
  • If your organization uses MDM (Mobile Device Management) software, configure the iPad in multi-app mode with the Zenoti mirror URL whitelisted. This prevents guests from navigating away from the mirror screen.
  • Keep the iPad on a charging cable during operation. Running the mirror screen continuously can deplete battery. The iPad can be used while charging.
  • Verify that both the primary device and the iPad are connected to the same Wi-Fi network before starting a shift. Network mismatches are the most common cause of mirror mode connectivity failures.
  • Register names are configured by your organization. If you are unsure which register to select, ask your administrator to confirm the correct register name for your workstation.

Troubleshooting

Why is the mirror screen stuck at "Connecting"?

The mirror screen displays a connecting state when it cannot establish a session with the primary device.

  • Confirm both devices are on the same Wi-Fi network.
  • On the primary device, close the current invoice and reopen it, then reinitiate the payment flow.
  • If the issue persists, reload the /mirror URL in Safari on the iPad.

Why is the mirror screen not showing the payment interface?

The mirror screen only updates when the correct cash register is selected on the primary device.

  • On the primary device, verify that the selected register matches the register that has Enable Invoice Mirroring enabled.
  • If the wrong register was selected, close the invoice, switch to the correct register via Settings > Cash Register, and reopen the invoice.

Why was the payment aborted without an error message from the guest?

Payments are aborted automatically when an unsupported payment processor is used, or when the mirror display is turned off mid-transaction.

  • Confirm that your organization is using a supported payment processor (Stripe Bluetooth card reader or Cloud payment such as Element Express).
  • TriPOS and Adyen are not supported for mirror mode payment flows. If your center uses either of these processors, mirror mode payment collection is not available.
  • If the mirror display was accidentally turned off during the transaction, restart the payment flow from the primary device.

Why is the mirror screen showing data from the previous guest?

Tip and donation values reset at the start of each new invoice. If you are seeing stale data, the previous invoice may not have been fully closed.

  • On the primary device, confirm the previous invoice is closed before opening a new one.
  • If the mirror screen still displays old values, reload the /mirror URL in Safari to reset the session.

Why is mirror mode not available on my iPad?

  • Confirm that Enable Invoice Mirroring is enabled on the cash register assigned to your session. For POS configuration, see the relevant articles in front-desk-point-of-sale.
  • Confirm that your Zenoti Mobile App is updated to the latest version. Open the App Store (iOS) or Google Play Store (Android) and check for available updates. Do not uninstall the app to resolve version issues β€” uninstalling deletes cached data and offline PINs.
  • Confirm that Safari is not restricted on the iPad (Settings > General > Restrictions). If Safari is restricted, the mirror page cannot load.
Was this article helpful?
Your feedback helps us improve our documentation.