ZenotiHelp

Pair a receipt printer to your iPad or Android tablet

ZTZenoti Docs Team Updated September 16, 2026 9 min readGuide

Zenoti Mobile supports Bluetooth thermal receipt printers on both iPads and Android tablets. Supported models for ZMA v2:

Device type Supported printers
iPad Star TSP650II, Epson TM-M30
Android tablet Star TSP650II, Epson TM-M30

The Miura M104 is supported on ZMA v1 (legacy) only.

This article covers pairing, test print, troubleshooting, and the contexts where receipts print.

On this page

How printer pairing differs from card-reader pairing

Receipt printers and Stripe card readers (BBPOS Chipper 2X BT, Stripe Reader M2) follow opposite pairing rules. This is the most common peripheral-pairing error β€” staff who have set up card readers before may instinctively skip the iPad Bluetooth Settings step for the printer, or staff who set up the printer first may try the same approach for the card reader and find it does not connect.

Receipt printers (Star TSP650II, Epson TM-M30) Stripe card readers (BBPOS Chipper 2X BT, Stripe Reader M2)
Pair via device Settings > Bluetooth Yes β€” required. The printer must appear and be paired in the device Bluetooth list (iOS Settings or Android Bluetooth Settings) before Zenoti Mobile can detect it. No β€” explicitly forbidden. Manual Bluetooth pairing makes the device unavailable to Zenoti Mobile.
Pair via Zenoti Mobile in-app No Yes β€” required. Use Settings > Connected Card Readers.
Why Printers are discovered through the platform's paired-accessories framework. There is no in-app pairing API. The Stripe Terminal SDK manages pairing internally and rejects accessories that the OS already considers "claimed."

For card-reader pairing, see Connect a card reader. The remainder of this article covers receipt printers only.

Before you begin

  • You need the following permission:

    Permission: Front-desk staff with POS (Point of Sale) access can pair a receipt printer on their assigned device. No organization-level configuration is required.

  • An iPad (iOS 12 or higher) or Android tablet with Zenoti Mobile installed.

  • A Bluetooth thermal receipt printer that is one of the supported models β€” see Device differences.

  • The printer is powered on, has its battery charged or is plugged into AC power, and has a paper roll loaded with the thermal-coated side facing the printhead. New printers ship with a starter roll; replacement rolls (80 mm for both supported models) are vendor-supplied.

  • The printer is within Bluetooth range of your device. Bluetooth Class 2 nominal range is approximately 10 m / 33 ft, line of sight, before walls or interference reduce it. Place the printer in the same room as the tablet during normal use.

  • Bluetooth is enabled on your device.

  • Zenoti Mobile has Bluetooth permission on your device.

One printer per device. Each tablet pairs with exactly one receipt printer at a time. The Zenoti Mobile app enforces this β€” connecting a second printer disconnects the first. To switch printers permanently, unpair the current device from Bluetooth settings before pairing the new one.

Scope: Zenoti Mobile on tablets. This printer-pairing flow is for Zenoti Mobile on iPad and Android tablets. The desktop POS prints to the desktop computer's configured printer or sends receipts by email β€” desktop receipt setup is out of scope for this article.

Device differences (Star TSP650II vs Epson TM-M30)

The pairing flow is the same for both printers. Key differences:

Star TSP650II Epson TM-M30
Bluetooth pairing button location On the back of the device On the side of the device
Pairing-mode LED indicator Refer to the printer's quick-start guide for blink pattern Refer to the printer's quick-start guide for blink pattern
Name in Bluetooth list Begins with Star Micronics Begins with TM-m30 (followed by a device-specific suffix)
Form factor Countertop, AC-powered (USB power adapter included) Countertop, AC-powered (USB power adapter included)
Paper width 80 mm (3 1/8 inch) thermal 80 mm (3 1/8 inch) thermal

Both printers connect via Bluetooth and are limited to one paired device at a time.

ZMA v1 only β€” Miura M104: The Miura M104 printer is supported on ZMA v1 (legacy) only. It is not recommended for ZMA v2 deployments. If you are on ZMA v2, use the Star TSP650II or Epson TM-M30.

Pair the printer to your iPad

Use this procedure for both Star TSP650II and Epson TM-M30 on iPad.

  1. Turn on the printer. Confirm power and that paper is loaded.
  2. On the iPad, open Settings > Bluetooth and turn Bluetooth on if it isn't already.
  3. Put the printer into pairing mode. Press and hold the Bluetooth pairing button until the indicator LED blinks (refer to the device quick-start guide for the specific blink pattern).
  4. Wait for the printer to appear in the iPad Bluetooth list under Other Devices:
    • Star TSP650II: an entry beginning with Star Micronics.
    • Epson TM-M30: an entry beginning with TM-m30.
  5. Tap the printer entry to pair. iPad reports Connected under the device name once pairing succeeds.
  6. Launch Zenoti Mobile. The app auto-discovers the paired printer through the iOS framework. No additional in-app pairing step is required.
  7. Run a test print to confirm the connection β€” see Run a test print.

Pair the printer to your Android tablet

Use this procedure for both Star TSP650II and Epson TM-M30 on an Android tablet.

  1. Turn on the printer. Confirm power and that paper is loaded.
  2. On the Android tablet, open Settings > Bluetooth (or Settings > Connected devices > Pair new device on some Android versions) and ensure Bluetooth is on.
  3. Put the printer into pairing mode. Press and hold the Bluetooth pairing button until the indicator LED blinks (refer to the device quick-start guide for the specific blink pattern).
  4. Wait for the printer to appear in the list of available devices:
    • Star TSP650II: an entry beginning with Star Micronics.
    • Epson TM-M30: an entry beginning with TM-m30.
  5. Tap the printer entry to pair. Android confirms Paired or Connected once pairing succeeds.
  6. Launch Zenoti Mobile. The app auto-discovers the paired printer. No additional in-app pairing step is required.
  7. Run a test print to confirm the connection β€” see Run a test print.

Run a test print

After pairing, verify the printer is reachable from Zenoti Mobile by printing a test receipt:

  1. In Zenoti Mobile, tap Settings.
  2. Tap Set up printers.
  3. Confirm the connected printer name matches the model and serial of the device you paired.
  4. Tap Test print.
  5. The printer should output a single short receipt with a header line and cut. If nothing prints or the output is garbled, see Troubleshooting.

When does the printer print?

Receipt printing happens in two contexts:

Context Trigger What prints
Standard POS payment in Zenoti Mobile After a successful card or non-card payment, tap Print receipt on the post-payment screen The transaction receipt for the closed invoice β€” line items, totals, tip, payment method, and any configured logo or footer
Mirror mode payment After a successful card payment in mirror mode, the FDO selects Print receipt on the desktop POS The same transaction receipt is routed to the iPad's paired receipt printer (the desktop relays the print job through the iPad's mirror connection). For details on the mirror flow, see Use mirror mode

Receipt content (logo, line items, totals, footer text, terms, regulatory disclosures) is configured in your receipt template β€” not on the printer or in this article. Contact your organization administrator for the receipt template configuration if you need to change what appears on receipts.

Troubleshooting

The printer does not appear in Bluetooth settings

  • Bluetooth disabled on the device. Open Bluetooth settings on your iPad or Android tablet and turn Bluetooth on.
  • Printer not in pairing mode. Press the printer's Bluetooth pairing button until the indicator LED blinks. The printer leaves pairing mode after about 2 minutes β€” restart the pairing-mode hold if needed.
  • Printer unplugged or out of power. Both the Star TSP650II and Epson TM-M30 are AC-powered countertop printers. Verify the power cable is connected and the printer is on.
  • Printer already paired with another device. Each printer pairs with one device at a time. On the other device, open Bluetooth settings, find the printer, and select Forget or Unpair. Then retry pairing on this device.

The printer pairs in Bluetooth settings, but Zenoti Mobile does not see it

  • Restart Zenoti Mobile. Force-close the app and relaunch.
  • Verify Bluetooth permission for Zenoti Mobile.
    • iPad: Open Settings > Privacy > Bluetooth > Zenoti Mobile β€” the toggle must be on.
    • Android: Open Settings > Apps > Zenoti Mobile > Permissions > Nearby devices β€” must be allowed.
  • Wrong printer paired. If multiple Bluetooth devices appear in the list, confirm you paired the entry beginning with Star Micronics (Star TSP650II) or TM-m30 (Epson TM-M30). Other Bluetooth accessories (headphones, keyboards) will not work for printing.

Test print produces blank or garbled output

  • Paper roll loaded backwards. Thermal printers print on only one side of the paper. Open the paper compartment and confirm the coated (shiny) side faces the printhead. On most rolls the coated side is the inside of the spool; if the roll is loaded with the coated side facing away, no ink appears.
  • Wrong paper width. Both the Star TSP650II and Epson TM-M30 use 80 mm (3 1/8 inch) paper. If you have a different paper roll installed, replace it with the correct width.
  • Printhead error or hardware fault. Power-cycle the printer. If the issue persists across multiple paper rolls and a power cycle, contact the printer vendor β€” this is a hardware problem, not a Zenoti configuration issue.

Printer disconnects mid-shift

  • Device went to sleep. On iPad, set Settings > Display & Brightness > Auto-Lock to Never during business hours. On Android, set the screen timeout to a longer interval or configure your MDM to prevent sleep on the front-desk device. (Auto-Lock to Never is also required for mirror mode.)
  • Device moved out of Bluetooth range. Bluetooth Class 2 nominal range is ~10 m / 33 ft. Move the device closer to the printer or place the printer in the same room.

Printer prints duplicate or stale receipts after a network drop

  • The print spool may not have flushed before reconnecting. Unpair the printer from Bluetooth settings, re-launch Zenoti Mobile, and re-pair the printer. The fresh session clears the spool.

Printer ran out of paper mid-receipt

  • Replace the paper roll. The printer typically resumes from the failed receipt without a duplicate; if a partial receipt was already cut, manually re-print the receipt from the Take Payment screen post-payment options.

FAQ

Can one printer serve multiple tablets? No. Each printer pairs with exactly one device at a time. To switch which tablet a printer is paired with, unpair from the current device first (Bluetooth settings > Forget), then pair on the new device.

Can one tablet connect to multiple printers? No. Zenoti Mobile maintains a single active printer instance per device. Connecting a second printer disconnects the first.

Does the desktop POS use the same receipt printers? No. The desktop POS prints to the desktop computer's configured printer (Windows or Mac driver) or emails receipts. The Bluetooth printers covered by this article are for Zenoti Mobile on tablets only.

Do I need a receipt printer at all? No. Receipts can be emailed to the guest from any payment surface (desktop POS, Zenoti Mobile, mirror mode). A printed receipt is optional.

What if my Star printer is labelled "Star 650 BT" rather than "Star TSP650II"? These are the same hardware family. "Star 650 BT" appears as the marketing name on some packaging; "TSP650II" is the model number. Both pair the same way.

What about the Miura M104? The Miura M104 is supported on ZMA v1 (legacy) only and is not recommended for new ZMA v2 deployments. If you are running ZMA v2, use the Star TSP650II or Epson TM-M30.

Was this article helpful?
Your feedback helps us improve our documentation.