ZenotiHelp

Connect a card reader

ZTZenoti Docs Team Updated September 16, 2026 3 min readGuide

The Zenoti Mobile App supports two types of card payment integration: Stripe Bluetooth card readers and Adyen Tap to Pay on iPhone. This article explains how to set up and manage each type.

Permission: Your role must have the appropriate permissions for this feature.

Card reader comparison

Feature Stripe Bluetooth Reader Adyen Tap to Pay on iPhone
Hardware required Separate physical card reader (BBPOS Chipper 2X BT, BBPOS WisePOS E, BBPOS WisePOS E Cloud, Stripe Reader M2) iPhone with NFC capability (no additional hardware)
Payment methods Chip insert, swipe, contactless (NFC) Contactless (NFC) only
PIN support WisePOS E: Yes; Chipper/M2: No No
Connectivity Bluetooth (Chipper, M2) or WiFi (WisePOS E) Built into iPhone
Payment processor Stripe Connect Adyen
Supported devices iPad and Android tablets iPhone only
Mirror mode Yes No
Tip prompts on device WisePOS E, M2: Yes; Chipper: No No

For detailed terminal setup and capabilities, see Configure payment terminals and card readers.

On this page

Stripe Bluetooth card reader

Stripe Bluetooth card readers connect wirelessly to your tablet or phone for accepting chip, swipe, and contactless card payments.

Before you begin

  • Ensure Bluetooth is enabled on your device.
  • Grant the app Bluetooth permission, and set Location access to Always (required for Bluetooth card-reader discovery). On iOS, go to Settings, tap Zenoti Mobile, choose Location, and set it to Always β€” "While Using" is not sufficient.
  • Charge the card reader and power it on.

Important β€” pair the card reader through Zenoti Mobile, NOT through iOS Settings > Bluetooth. Stripe card readers manage their pairing through the Zenoti Mobile in-app discovery flow below. If you pair the reader through iPad Settings > Bluetooth, Zenoti Mobile cannot communicate with it and discovery will fail. The opposite rule applies to Bluetooth receipt printers (Star TSP650II, Miura M104) β€” those must be paired via iPad Settings > Bluetooth. For receipt printer setup, see Pair a receipt printer to your iPad.

Connect a reader

  1. Open Settings > Connected Card Readers.
  2. The app scans for nearby BBPOS Bluetooth readers.
  3. Available readers appear in a list with their device numbers.
  4. Tap Connect against the device number.
  5. An alert asks you to enable Auto-connection. Auto-connection lets the Zenoti Mobile app reconnect to the existing BBPOS card reader automatically when the front desk logs in or the app is launched. Tap Yes to enable Auto-connect.
  6. If a software update is available, the app downloads and installs it. A progress indicator shows the update status.
  7. Once connected, the reader shows a Connected status.

Check connection status

The settings screen displays the currently connected card reader with its name and status. If the reader disconnects, the app notifies you and you can reconnect from the same screen.

Disconnect a reader

To disconnect, return to Settings > Connected Card Readers and tap the connected reader, then select Disconnect.

Adyen Tap to Pay on iPhone

Tap to Pay on iPhone allows you to accept contactless card payments directly on an iPhone β€” no separate card reader hardware needed. This integration uses Adyen as the payment processor.

Before you begin

  • You need an iPhone with NFC capability.
  • Your organization must have Adyen Tap to Pay enabled.

Set up Tap to Pay

  1. Open Settings > Tap to Pay Settings.
  2. The screen shows your current linking status (Linked or Not Linked).
  3. If not linked, tap Accept to agree to the Adyen terms.
  4. Follow the prompts to link your device to Adyen.
  5. Once linked, the status changes to Linked with a confirmation indicator.

How to use Tap to Pay

After setup, when you process a card payment in the POS (Point of Sale):

  1. Select card payment as the payment method.
  2. The app activates the Tap to Pay interface.
  3. Ask the guest to hold their contactless card or device near the top of the iPhone.
  4. The payment processes and a confirmation appears.

To unlink your device from Adyen Tap to Pay, return to Settings > Tap to Pay Settings and follow the unlinking process.

Troubleshooting

Issue Solution
No readers found during scan Ensure Bluetooth is on, the reader is powered on and charged, and location permission is granted
Reader disconnects frequently Move the reader closer to the device, ensure the reader firmware is up to date
Tap to Pay not available Verify your iPhone supports NFC and your organization has Adyen enabled
Software update stuck Restart the card reader and try the connection again
Was this article helpful?
Your feedback helps us improve our documentation.