Configure eprescription settings
The ePrescriptions settings area provides an embedded interface for managing electronic prescription onboarding. Use this section to register users and centers for electronic prescribing capabilities.
Audience: Administrators who configure ePrescription settings.
Availability: ePrescriptions is currently available only in the United States. The integration uses the ePrescribe portal, which operates under US regulatory frameworks (DEA, state pharmacy boards).
On this page
- Before you begin
- Onboarding overview
- Activate ePrescribe for a center
- Invite prescribers
- Invite admins and support agents
- EPCS approval
- Manage Centers and Users
- Activate a user
- Deactivate a user
- Related articles
Before you begin
- You need administrator access at the organization level.
- The guest prescription feature flag must be enabled for the ePrescriptions settings area to appear.
- Only employees who have been onboarded to the ePrescribe portal can activate additional centers or manage users. Non-onboarded employees are restricted even with the correct permissions.
Permission: Invite User and Deactivate User under ePrescription User Management in the Administrator section β required for full management access when both are granted.
Navigation
- Navigate to Configuration > ePrescribe settings.
- The onboarding management interface displays based on your permissions and onboarding status.
Onboarding overview
The ePrescribe onboarding manager supports three user types:
- Prescribers -- Licensed providers who write electronic prescriptions. Prescribers with EPCS (Electronic Prescribing of Controlled Substances) rights require additional approval and DEA number entry.
- Admins -- Administrative users who manage the ePrescription setup and user registrations.
- Support agents -- Users who assist with ePrescription workflows but do not prescribe.
Each center must be individually activated before providers at that center can submit electronic prescriptions. Role changes after onboarding require Zenoti assistance.
Activate ePrescribe for a center
Each center must be individually activated before electronic prescribing can be used at that location. For the very first center being onboarded, you must select a base center that serves as the primary location for the ePrescribe integration. Only users with an Admin role in the ePrescribe portal can activate centers.
Center prerequisites
Before activating a center, ensure the following information is configured in the center's profile:
- Phone number β A unique phone number for this center (cannot be shared with another activated center).
- Fax number β A fax number for the center, used for pharmacy communications.
- Address β The center's full physical address.
- PIN β The center's identification PIN for the ePrescribe integration.
Employee profile prerequisites
Before onboarding any user to the ePrescribe portal, ensure the following information is configured in the employee's profile:
- Email address β Required for receiving the invitation and portal login.
- Phone number β Required for portal verification and MFA.
- Date of birth β Required for identity verification.
- Gender β Required for the ePrescribe portal registration.
- Address β Full physical address required.
- ZIP code β Required for regulatory compliance.
Navigate to the employee's profile and verify all fields are populated before initiating the invitation.
Tip: For the first prescriber being onboarded, recommend selecting someone who also holds an admin role in Zenoti. The first prescriber serves as the base employee for the ePrescribe integration, and admin-level access simplifies the initial setup.
Steps
- Navigate to Configuration > ePrescribe settings.
- Select the target center from the scope selector (or select the organization scope to activate multiple centers).
- In the Manage Centers and Users interface, locate the center activation section.
- For first-time onboarding, select the base center β this is the primary center that establishes your organization's ePrescribe account.
- Verify the required center information (phone, fax, address, PIN) is populated correctly.
- Submit the activation request. If any required center details are missing, an error message appears listing the missing fields. Navigate to the center's profile to complete them, then refresh the onboarding page to continue.
- Wait for the activation to be confirmed. The center status updates to Active once processing completes.
Important: Only employees who are already onboarded to the ePrescribe portal can activate additional centers. Complete your own onboarding first before activating centers.
Note (R2-S12): If the logged-in user adding the prescriber is not onboarding themselves, they are automatically added as an admin with status Pending Activation until they complete their own onboarding via the invitation email they receive.
Invite prescribers
Prescribers are licensed providers who write electronic prescriptions. Each prescriber must be individually invited and onboarded. During the invitation, you must select the prescriber type: EPCS (can prescribe controlled substances) or Non-EPCS (standard prescribing only). This selection determines the verification requirements during onboarding.
Steps
- Navigate to Configuration > ePrescribe settings.
- In the Manage Centers and Users interface, select Invite User or the equivalent add option.
- Select Prescriber as the user type.
- Select the prescriber type:
- EPCS Prescriber β Can prescribe controlled substances electronically. Requires additional identity verification and DEA number.
- Non-EPCS Prescriber β Standard electronic prescribing without controlled substance privileges.
- Enter the prescriber's details:
- Name and contact information
- NPI (National Provider Identifier) β Auto-filled from the employee profile if already configured in Manage > Licensing information > Configure Credentials.
- DEA number β Auto-filled from the employee profile if available. Required for EPCS prescribers.
- State license number β Auto-filled from the employee profile if available.
- Select the centers where this prescriber is authorized to prescribe.
- Submit the invitation.
Important: If the invitee's name does not exactly match their NPI registry entry, the invitation will fail. Verify the prescriber's exact legal name on the NPI registry before sending the invitation.
Prescriber portal onboarding
After the invitation is submitted, the prescriber receives an onboarding invitation link:
- Invitation validity β The invitation link is valid for 5 days. If the prescriber does not complete onboarding within this period, you must resend the invitation.
- Portal registration β The prescriber clicks the invitation link and creates their ePrescribe portal account.
- ID.me verification β The prescriber completes identity verification through ID.me, which includes:
- Document upload β Upload a government-issued photo ID (driver's license, passport, or state ID).
- Selfie verification β Take a live selfie for facial matching against the uploaded ID.
- SSN verification β Enter the last four digits of their Social Security Number for identity confirmation.
- Multi-factor authentication (MFA) setup β Configure MFA (authenticator app or SMS) for ongoing portal access.
- Once ID.me verification completes, the prescriber is fully onboarded and can submit electronic prescriptions from the assigned centers.
Note: ID.me verification is mandatory before prescribing. If a prescriber skips ID.me verification during onboarding and later attempts to write a prescription, they are automatically prompted to complete ID verification before the prescription can proceed.
Note: After ID.me verification is completed, the prescriber's status in Zenoti updates to Active.
Invite admins and support agents
Admins manage the ePrescription setup, while support agents assist with workflows without prescribing authority.
Steps
- Navigate to Configuration > ePrescribe settings.
- In the Manage Centers and Users interface, select Invite User or the equivalent add option.
- Select Admin or Support Agent as the user type.
- Enter the user's details:
- Name β The user's full name.
- Email β The user's email address for receiving the invitation and portal login.
- Phone number β Contact phone number.
- Center assignments β Select the centers this user can manage (Admin) or support (Support Agent).
- Submit the invitation.
Admins receive full management access to the ePrescribe portal for their assigned centers, including user management and center configuration. Support agents receive limited access for troubleshooting and workflow assistance without prescribing capabilities.
EPCS approval
Prescribers who need to electronically prescribe controlled substances require additional EPCS (Electronic Prescribing of Controlled Substances) approval. This is a separate process from standard prescriber onboarding and involves additional identity proofing and verification. When a new EPCS prescriber is onboarded, the ePrescribe portal automatically notifies the organization's Full Admin via a popup notification in the portal requesting EPCS approval review.
Note: The first prescriber onboarded to any center automatically receives EPCS approval authority across all centers in the organization. This authority is a system rule β it is not a configurable setting and does not require administrator action. Subsequent prescribers follow the standard EPCS approval workflow described below.
Steps
- Navigate to Configuration > ePrescribe settings.
- Locate the prescriber in the Manage Centers and Users interface.
- Initiate the EPCS approval workflow for the prescriber.
- Ensure the prescriber's DEA number is entered and verified.
- The prescriber completes the additional identity verification steps required by the ePrescribe portal, including ID.me verification (if not already completed during initial onboarding).
- Once the EPCS approval is submitted, the ePrescribe portal displays approval popups:
- Approve β Approve an individual prescriber for EPCS access.
- Approve All β Approve multiple prescribers for EPCS access in a batch operation (available to Admin users).
- Once approved, the prescriber's status updates to EPCS-approved, and they can electronically prescribe controlled substances from their assigned centers.
Note: EPCS approval timelines vary based on verification requirements. Contact your Zenoti representative if the approval process is delayed.
Manage Centers and Users
| Setting | Type | Description |
|---|---|---|
| Manage Centers and Users | Manager (embedded) | Manage the registration of users and centers for electronic prescribing. Set up providers and locations that are authorized to submit electronic prescriptions. Supports onboarding prescribers, admins, and support agents, with EPCS approval workflows for controlled substances. |
Scope: Organization, zone, and center levels.
Permission: Invite User and Deactivate User under ePrescription User Management in the Administrator section β required to access this interface. If the organization is already onboarded, only employees who are themselves onboarded can access it.
Guest Prescription Tab: Viewing the Guest Prescription Tab additionally requires View under Guest Prescription Tab in the Administrator section. This is distinct from the Prescription V2 row in the Appointment Book section, which governs prescription create, add, sign, and sign-with-controlled-substances actions.
Activate a user
To reactivate a previously deactivated ePrescribe user:
- Navigate to Configuration > ePrescribe settings.
- In the Manage Centers and Users interface, locate the deactivated user.
- Select the user and choose Activate.
- The user's status changes to active, and they regain access to the ePrescribe portal for their assigned centers.
Deactivate a user
To revoke a user's access to the ePrescribe portal:
- Navigate to Configuration > ePrescribe settings.
- In the Manage Centers and Users interface, locate the user you want to deactivate.
- Select the user and choose Deactivate.
- Confirm the deactivation. The user immediately loses access to the ePrescribe portal and can no longer submit or manage electronic prescriptions.
Note: Deactivating a user does not delete their prescribing history. All previously submitted prescriptions remain in the system. To reactivate a deactivated user, use the Activate procedure above.
Edit prescriber type
To change a prescriber from EPCS to Non-EPCS or vice versa:
- Navigate to Configuration > ePrescribe settings.
- Locate the prescriber in the Manage Centers and Users interface.
- Select the prescriber and choose Edit prescriber type.
- Change the prescriber type:
- EPCS β Non-EPCS β Removes controlled substance prescribing privileges.
- Non-EPCS β EPCS β Requires additional DEA number entry and EPCS approval.
- Save the change.
Note: Changing from Non-EPCS to EPCS triggers the EPCS approval workflow, which requires additional identity verification.
Resend invitations
To resend an invitation to a user whose onboarding is still in progress:
- Navigate to Configuration > ePrescribe settings.
- Locate the user in the Manage Centers and Users interface.
- Select the user with an in-progress onboarding status.
- Select Resend invite.
- A new invitation email is sent to the user's registered email address.
Resending is necessary when the original invitation has expired (after 5 days) or the user did not receive the initial email.
Add prescribers to multiple centers
Prescribers can be registered at multiple centers. The behavior differs by prescriber type:
- Non-EPCS prescribers β When added to a new center, the prescriber is automatically registered on both the Zenoti side and the ePrescribe portal. No additional action is required.
- EPCS prescribers β When added to a new center, the prescriber is registered on the Zenoti side only. Portal activation for the new center occurs within a 24-hour activation window. During this window, the prescriber's portal access for the new center is being processed.
Note: When a prescriber is added to an additional center, they inherit the same user type (Provider, Admin, etc.) they were assigned at the initial base center. The user type cannot differ across centers for the same prescriber.
Steps
Before adding the prescriber at the new center, confirm their Employee Roles are configured: navigate to the center, go to View β Center β Role, then Add Role if needed. The prescriber must have an active role at the center before they can be associated with it in the ePrescribe portal.
- Navigate to Configuration > ePrescribe settings.
- Locate the prescriber in the Manage Centers and Users interface.
- Select Add center or the equivalent option to assign the prescriber to additional centers.
- Select the target center(s).
- Save.
Admin onboarding details
When onboarding an admin user to the ePrescribe portal, the following information is collected:
- Personal details β Full name and contact information.
- Login email β The email address used for portal access.
- Phone number β For portal verification and support contact.
- Terms of Use β The admin must accept the ePrescribe portal Terms of Use.
- Code of Conduct β The admin must accept the Code of Conduct.
- Privacy Policy β The admin must accept the Privacy Policy.
After accepting all terms, the admin account is activated and the admin can begin managing users and centers in the ePrescribe portal.
Employee termination and ePrescribe
When an employee is terminated in Zenoti, their ePrescribe portal account is automatically deactivated. No manual deactivation is required. The terminated employee immediately loses access to the ePrescribe portal and can no longer submit or manage electronic prescriptions.
If the employee is later reinstated, their ePrescribe account must be manually reactivated using the Activate a user procedure.
Denied EPCS requests
If an admin denies an EPCS (Electronic Prescribing of Controlled Substances) request for a prescriber, the user is automatically onboarded as Non-EPCS. The prescriber can still submit standard (non-controlled substance) electronic prescriptions but cannot prescribe controlled substances.
To later grant EPCS access, use the Edit prescriber type procedure to change the prescriber from Non-EPCS to EPCS, which will re-initiate the EPCS approval workflow.
ePrescribe portal operations
Once onboarded, users interact with the ePrescribe portal for day-to-day electronic prescribing operations. The following capabilities are available within the portal based on user role.
Note: Prescriptions with a status of Denied or Deleted cannot be printed from the portal.
Note: The In-House Pharmacy status (indicating the prescription is filled by the clinic's internal pharmacy) requires opt-in by contacting the ePrescribe portal support team before it appears as an option.
Note (Pharmacy search): Pharmacies that have closed for e-prescribing may still appear in web searches as operating (for retail items), but they do not appear in ePrescribe portal search results and cannot receive electronic prescriptions.
User roles and capabilities
| Role | Capabilities |
|---|---|
| Full Admin | Full portal management, user administration, center configuration, prescribing (if also a prescriber) |
| Provider | View, print, and add e-prescriptions; manage drug details; pharmacy management |
| Support Staff | Prescribe on behalf of providers; manage queued prescriptions; assist with workflows |
Guest profile prerequisites
Before adding a prescription for a guest, the following must be present on the guest's profile:
- Email address
- Date of birth
- Address (full mailing address)
Prescription statuses
| Status | Description |
|---|---|
| Active | Currently valid prescription |
| Archived | Prescription moved to archive (no longer active) |
| Cancel | Prescription cancelled by the prescriber |
| Discontinued | Prescriber discontinued the medication |
| Queued | Awaiting approval from the supervising provider |
| Current Medication | Recorded as a current medication (not a new prescription) |
| In-House Pharmacy | Fulfilled by the in-house pharmacy |
Key portal operations
- View and print prescriptions β Review prescription details and print copies for the guest or records.
- Add prescriptions β Create new prescriptions for guests. Support staff can prescribe on behalf of providers.
- Manage queued prescriptions β Approve, deny, or edit prescriptions that are in the queue awaiting provider review.
- Schedule Multiple Rx β Prescribe multiples of the same medication with different start dates or quantities.
- Compound medication setup β Create compound medications that combine multiple drug components.
- Drug details management β Manage drug favorites, view drug information, set allergies, and set current medications for a guest.
- Pharmacy management β Search for and select pharmacies, set preferred pharmacies for guests.
- Messaging β Handle change requests, new prescription messages, errors, and view message history.
- Insurance information β View insurance details and use Quick Insurance Lookup for guest coverage verification.
- Cancel prescriptions β Cancel previously submitted prescriptions.
Portal reports
The ePrescribe portal provides the following reports:
| Report | Description |
|---|---|
| Audit Log | Complete audit trail of all portal actions |
| Medication Users | List of users with medication prescribing activity |
| Operational Record | Operational activity summary |
| Patient List | List of patients with prescriptions |
| Patient Visits | Patient visit history within the portal |
| Prescription Logs | Detailed log of all prescriptions |
| Prescription Logs by Prescriber | Prescription activity broken down by prescriber |