ZenotiHelp

Price Column β€” Job Card Print Settings

ZTZenoti Docs Team Updated November 4, 2026 3 min readHow-to

The Price toggle in job card print settings controls whether the Price column appears on the 3-column job card for service history, product history, future appointments, and today's services. Enable this toggle at the center scope to give providers a complete financial view of the visit directly on the printed job card.

Note: For conceptual background on job card printing, see Configure POS (Point of Sale) essentials.

Audience: Center administrators who manage print settings for providers.


On this page


Before you begin

  • The Price toggle is a center-level setting. You must navigate to it from the center scope.
  • The 3-column job card layout must be active for the Price column to appear. Confirm that Enable 3-column single-page job card layout is turned on and that Printer size is set to Regular - A4 size β€” these are prerequisites for the Price column to render.
  • You need access to the center's print configuration settings in Configuration.

Permission: You need the Manage Center permission to view and edit center-level print settings. Admin path: Configuration > Security > Security roles > [your role] > Administrator > Manage Center


Steps

Enable the Price column on the job card

  1. Select the Configuration icon from the left icon rail.
  2. Navigate to POS and open your center's settings.
  3. Scroll to the Print section, then select Print and email receipt.
  4. Locate the Price toggle under the job card print settings.
  5. Turn on Price.
    • Price β€” Enable this to show the Price column on the 3-column job card for service history, product history, future appointments, and today's services.
  6. Select Save.

Important: The Price column only appears when Enable 3-column single-page job card layout is also on and Printer size is set to Regular - A4 size. If the 3-column layout is not active, enabling this toggle has no visible effect on the printed card.


Tips

  • Before enabling the Price column, print a test job card to confirm the 3-column layout is rendering correctly on your A4 printer. This avoids discovering layout issues during a busy service period.
  • If your center uses a receipt-sized printer, the Price column will not appear regardless of this setting. Check Printer size and switch to Regular - A4 size if needed.
  • The Price column reflects the service or product price as configured in your catalog. If price scaling is in use, providers will see the scaled price relevant to their level.

Troubleshooting

The Price column does not appear on the printed job card after enabling the toggle.

Check the following:

  • Confirm Enable 3-column single-page job card layout is turned on in the same job card print settings section.
  • Confirm Printer size is set to Regular - A4 size. If it is set to Receipt, the 3-column layout is not active and the Price column cannot display.
  • After saving the setting, reprint the job card β€” previously cached print templates may not reflect the change immediately.

The job card prints in the old 2-column format even though the 3-column layout is enabled.

  • Verify that the Printer size is set to Regular - A4 size. The 3-column layout applies only to A4-sized output.
  • If the issue persists after confirming both settings, contact your Zenoti administrator to check whether a center-level override is suppressing the layout.

The Price column shows for some sections but not others.

  • The Price column applies across all four sections: service history, product history, future appointments, and today's services. If only some sections appear to be missing the Price column, the job card template may not have updated. Save the setting again and reprint.

Was this article helpful?
Your feedback helps us improve our documentation.