ZenotiHelp

Configure queue notifications and wait time

ZTZenoti Docs Team Updated October 27, 2026 9 min readHow-to

Wait time visibility and proactive notifications help both guests and staff manage expectations in the queue. This article covers how the system calculates and displays wait times, the notification types available for queue events, how queue positions are determined, and how to configure provider performance metrics in the queue view.


On this page


Before you begin

  • Your organization must have the queue feature enabled via the Enable Admin Queue setting at the organization level, and Operate appointment book in Queue mode must be enabled at the center level.
  • You need administrator access at the center level to modify notification and wait time settings.
  • Determine which notification types you want to send to guests (email, SMS, or both).
  • Review your center's typical service durations to set appropriate wait time thresholds.

Permission: Edit (under Organizations) is required to modify queue notification settings.

Wait time calculation and display

The queue provides several wait time indicators to help front desk staff and guests understand how long the wait will be. These indicators are updated automatically after each queue reprocessing cycle.

Center-wide wait time

The center wait time is displayed at the top of the queue dashboard and represents the estimated time until the next available appointment slot at the center. This value is calculated during each queue reprocessing cycle by analyzing:

  • The number of waiting appointments
  • The service durations for each waiting appointment
  • The number of available providers and their current workload
  • The scheduled end times of in-progress services

The center wait time updates after every queue state change (check-in, start, complete, no-show, or skip). It gives guests and staff a quick sense of how busy the center is at any moment.

Note: The center wait time is an estimate based on current conditions. Actual wait times may vary if guests are marked as no-shows, services run longer or shorter than expected, or additional providers check in.

Guest deviation time

Guest deviation time shows the difference between a guest's originally scheduled appointment time and their current estimated start time based on the queue. This helps staff identify guests whose appointments are running behind schedule.

When the Show guest wait time deviation setting is enabled, each queue card displays the deviation value. A positive deviation means the guest is expected to start later than originally scheduled. A negative deviation (or zero) means the guest is on time or ahead of schedule.

The label text displayed alongside the deviation value on queue cards is configurable. You can set this label to match your center's preferred terminology so staff immediately understand what the value represents.

Guest deviation time is useful for:

  • Identifying guests who have been waiting longer than expected so staff can prioritize them or offer an explanation.
  • Monitoring overall schedule adherence for the day.
  • Spotting bottlenecks where a particular provider or service is causing delays.

Minimum guest wait time

The Minimum guest wait time center setting is a duration in minutes that gates service eligibility. Guests must wait at least this many minutes after joining the queue before becoming eligible for service. This is a functional threshold, not a static display label.

The displayed minimum-wait text shown to staff (for example, "15 min") derives from the same numeric value. When the actual calculated wait time exceeds the minimum, the system displays the calculated value instead.

Configure the Minimum guest wait time value at the center level based on your center's typical minimum service preparation time.

Important: Setting this value too high may delay service unnecessarily. Setting it too low may allow guests to be called before providers have completed preparation. Align this value with your center's actual preparation workflow.

Queue notification types

The queue supports several notification types that keep guests informed about their position and estimated wait time. These notifications are triggered automatically during queue reprocessing and delivered through the configured channels.

The queue also prevents duplicate reminder notifications. For first and second reminder notification types, if a pending notification of the same type already exists for the same appointment and at least one delivery channel (email, SMS, or push) is still pending, the system skips sending a new notification. This prevents guests from receiving duplicate messages when the queue reprocesses frequently.

Next-in-line notification

The next-in-line notification is sent to a guest when they become the next person to be served by their assigned provider. This notification tells the guest that their service will begin shortly and they should be ready.

The notification is triggered during queue reprocessing when the system determines that a guest has moved to the first position for their provider. It is sent once per provider assignment — if the guest's provider changes, they may receive a new next-in-line notification for the new provider.

Wait time threshold notification

The wait time threshold notification is sent to a guest a configurable number of minutes before their estimated appointment start time. This gives the guest advance notice that their service is approaching.

For example, if the threshold is set to 10 minutes, the guest receives a notification when their estimated start time is 10 minutes away. This is useful for guests who are waiting outside the center or in a separate area and need time to prepare.

The threshold value is configured in your notification settings and applies to all queue appointments at the center.

Position threshold notification

The position threshold notification is sent when a guest reaches a specific position in the queue. For example, you might configure a notification to be sent when a guest is third in line, giving them time to wrap up other activities and be ready when their turn comes.

The position is calculated based on the minimum estimated start time and the order in which appointments were created. This ensures that the position accurately reflects the guest's place in the service order.

Client ready for queue notification

The client ready for queue notification is a staff-initiated notification sent to inform a guest that the queue is ready for them and their provider is ready to begin. This is typically used when:

  • A guest has checked in remotely (online check-in) and needs to be told to come to the service area.
  • A guest is in a waiting area and their provider is ready to begin.

Staff trigger this notification by selecting Ready for client from the horizontal ellipsis (⋯) menu on the waiting guest's queue card. The notification is sent through the configured delivery channel (SMS, email, or both).

No-show handling and notifications

When a guest does not present for their appointment, front desk staff can mark them as a no-show directly from the queue. Staff select the option from the queue card using the button configured with the Enter label for no-show button center setting, which lets your organization use a label that fits your business terminology.

When the no-show action is selected, a confirmation dialog appears with:

  • A Reason List dropdown — selecting a reason is required before submitting.
  • An optional Comments input for additional context.
  • A Submit button to confirm the no-show.

After the no-show is confirmed, the appointment status changes, the queue automatically recalculates estimated wait times for remaining guests, and changes appear on other open queue screens without requiring a manual refresh.

Auto-purge of no-show guests

When the Enable automatic purge of no-show guests from queue center setting is enabled, the queue automatically marks overdue appointments as no-shows based on source-specific timer limits configured at the center level:

Source Setting
Walk-in appointments Set an auto-delete timer limit for walk-in guests (in minutes)
Online check-in, guest in center Online checkin and guest in store timer limit (in minutes)
Online check-in, guest not in center Online checkin and guest not in store timer limit (in minutes)

If a guest's time in the Guests Waiting section exceeds the relevant timer, they are automatically moved to no-show status without requiring staff action.

Bypassing the purge timer

When Enable automatic purge of no-show guests from queue is active, staff can bypass the remaining purge timer for a specific guest by selecting the bypass option from the queue card. The bypass action replaces the appointment's remaining purge timer with the value configured in Bypass purge timer limit (in minutes). It does not add to or extend the remaining time — it sets a new fixed duration from the moment the bypass is applied.

Important: Confirm the Bypass purge timer limit (in minutes) is configured at the center level before relying on the bypass action. If the value is set to zero or left unconfigured, the bypass may immediately expire.

Queue positions

Each waiting guest in the queue is assigned a position number that indicates their place in the service order. Positions are calculated based on two factors:

  1. Minimum start time — the earliest estimated start time across all services in the guest's appointment.
  2. Creation date — the timestamp when the appointment was created, used as a tiebreaker when multiple guests have the same estimated start time.

Position numbers are displayed on queue cards and update automatically during each reprocessing cycle. When a guest is served, skipped, or marked as a no-show, all remaining positions are recalculated.

Permission: Displaying guest queue position numbers to staff requires the Show guest numbers in Queue view permission. This is configured per role at Configuration > Security > Security roles > (role) > PERMISSIONS > Queue & Pin > Queue items > Show guest numbers in Queue view. When this permission is not granted, position numbers are hidden from the queue cards.

Notification delivery channels

Queue notifications can be delivered through the following channels:

Channel Description
SMS A text message is sent to the guest's mobile phone number on file. This is the most common channel for time-sensitive queue notifications.
Email An email is sent to the guest's email address on file. Useful as a secondary channel or for guests who prefer email.
Both Both SMS and email are sent simultaneously. Use this option when you want to maximize the chance that the guest receives the notification.

The delivery channel is configured at the notification level. Different notification types can use different channels. For example, you might send next-in-line notifications via SMS only (for immediacy) while sending wait time threshold notifications via both SMS and email.

Note: Notification delivery depends on the guest having valid contact information on file. If a guest does not have a phone number, SMS notifications are not sent. If a guest does not have an email address, email notifications are not sent.

Provider performance metrics in the queue

When the setting that controls employee metrics display in the queue is enabled, the queue dashboard displays performance metrics for each provider. These metrics give managers visibility into provider productivity directly from the queue view.

A companion visibility setting controls which staff roles can see these metrics in the queue view. By default, metrics visibility is restricted and must be explicitly configured.

Performance metrics appear in the Available Therapists section and optionally on provider labels in the queue. This helps managers make informed decisions about provider assignments and workload distribution.

Note: Provider performance metrics in the queue are read-only indicators. They do not affect queue reprocessing or automatic provider assignment. Metrics are calculated from the current day's activity only.

Availability: Employee metrics display in the queue is a platform-level configuration. Contact your Zenoti account team if this capability is not visible in your queue settings.

Was this article helpful?
Your feedback helps us improve our documentation.