ZenotiHelp

Feature Gating & Settings

ZTZenoti Docs Team Updated November 3, 2026 13 min readHow-to

Queue settings operate at two levels β€” organization and center β€” and govern which capabilities are active at each center, how guests move through the queue, how providers are assigned, and how wait times are calculated. Understanding how these settings interact helps administrators configure the queue to match their center's service model and front desk workflow.


On this page


Before you begin

  • Administrator access is required to view and change queue settings.
  • Queue settings are configured at Configuration > Appointments > Queue at both the organization and center levels.
  • Some settings depend on the queue already being enabled. Enable the queue at the organization level first, then at the center level.

How it works

Settings are organized at two levels:

  • Organization level β€” global defaults and feature toggles that apply across all centers in the organization.
  • Center level β€” settings scoped to a specific center that can override or extend organization defaults.

For settings where both levels must be active, disabling either level deactivates that capability for the affected center. Settings in this overview are organized by functional area.

Queue enablement and core behavior

The queue uses a two-level enable:

  • Enable Admin Queue must be active at the organization level.
  • Operate appointment book in Queue mode must be active at the center level.

Both must be true for a center to operate in queue mode. A center where only the organization-level setting is active will not display the queue.

Additional core behaviors at the organization level:

  • Queue performance optimization β€” when active, Zenoti optimizes how queue data is fetched, improving responsiveness for high-volume centers.
  • Auto-reload control β€” by default, the queue refreshes automatically. When automatic refresh is disabled, staff must reload manually to see updates from other workstations.
  • Real-time sync β€” when active at the organization level (and a required infrastructure setting is also active), changes made by one staff member appear automatically on all other open queue screens without a manual refresh.

The guest kiosk follows the same two-level pattern: an organization-level kiosk setting and a center-level kiosk mode flag must both be active for a center's kiosk to function. For guest kiosk, see Front Desk Kiosk.

Queue reprocessing β€” the automatic recalculation of estimated wait times and provider assignments after a status change β€” is a center-level capability. The center-level Reschedule queue based on resource availability setting must be active, and the queue must be enabled at both the organization and center levels, for reprocessing to run.

Guest flow and ordering

Allow guest services to start irrespective of the order in Queue (organization level) β€” controls whether providers must serve guests in arrival order.

  • When enabled: providers can start any guest's service regardless of queue position. All appointment blocks in the queue are visually highlighted to signal that flexible ordering is active. The Skip button is removed from queue cards; only Left and Start remain.
  • When disabled: the queue enforces first-in-first-served ordering.

Important: Enabling flexible queue ordering can result in inconsistent wait times. Undo-start actions delay reprocessing, which causes estimated wait times to shift unpredictably.

When flexible ordering is enabled, the companion setting "Automatically move the appointments in the Appointment Book, based on start and complete actions" governs Appointment Book synchronization:

  • When a service starts from the queue, the Appointment Book block moves to the actual start time.
  • When a service completes, the block resizes to reflect the actual service duration.
  • Undoing a start does not reset the Appointment Book block to the originally scheduled time.
  • Staff can start and complete multiple appointments as a group from the queue.

Note: When the companion sync setting is active and a service is started or completed from the queue, the Appointment Book block's start time rounds down to the nearest slot and the completion time rounds up to the nearest slot. For example: an appointment scheduled 10:00–10:30 that is started at 9:53 and completed at 10:13 displays in the Appointment Book as 9:50–10:15. When a multi-service visit is started as a whole from the queue, services are scheduled sequentially β€” each service starts only after the previous one ends.

When service selection at check-in is enabled (on by default), guests can select or change their service when checking in via the queue. When disabled, service selection is unavailable at check-in.

When When a reprocessing event occurs, allow services scheduled in the future to have their start times modified to be earlier after guest checks in is active (center level), Zenoti can automatically advance a future-scheduled appointment to an earlier available slot after the guest checks in before their booked time. For example: an appointment is booked for 11:00 AM; the guest checks in at 10:00 AM; if a 10:30 AM slot opens, Zenoti moves the appointment to 10:30 AM.

Call-ahead bookings β€” future-dated appointments added from the queue via the Book button β€” display a blue color band on their queue card to distinguish them from same-day walk-in entries.

Show walk-in appointments in pink color, in the Queue view β€” when enabled, walk-in queue cards display in pink, making them visually distinct from the blue color band used for call-ahead bookings. Helper text: "When enabled, walk-ins will display in pink color, in the Queue view, making them visually distinct from blue colored call-aheads."

Prioritize guests with scheduled services over walk-in guests (organization level) β€” when active, guests with pre-booked scheduled appointments are positioned ahead of walk-in guests in the queue.

Show preferred time in Queue β€” when active, the guest's preferred service time is displayed on the queue card.

Do not show past time slots on booking wizard β€” when active, past time slots are hidden in the Booking Wizard, provided the guest has services booked in the future.

Show start time in booking wizard β€” when active, a start time column appears in the Booking Wizard. Show end time in booking wizard β€” when active, an end time column appears.

Provider assignment

  • Show available therapists in Admin Queue (center level) β€” when active, a sidebar labeled Available Therapists (also referred to as Providers in some business configurations) appears in the queue view, listing providers who are currently checked in. When disabled, the sidebar is hidden.
  • Show scheduled therapist for the day in Queue (center level) β€” when active, only providers who are scheduled for the day appear in the queue's provider list.
  • Assign therapist based on idle time (center level) β€” when active, Zenoti automatically assigns the provider with the longest idle time when a guest is ready for service.
  • Make it mandatory for employees to assign a service provider before starting a service (organization level) β€” when active, staff cannot start a service until a provider is explicitly assigned to the appointment.
  • Employee Availability Source (center level) β€” determines which providers appear as available in the queue. Two values are supported:
Value Behavior Example wait-time results
Clocked-in availability (default) Only providers who have clocked in are listed as available 0 / 60 / 120 min
Scheduled availability All providers scheduled for the day appear, regardless of whether they have clocked in 0 / 30 / 60 min

This setting is visible only when Reschedule queue based on resource availability is enabled at the center level.

Note: At least one provider must check in via the clock icon on the menu bar before the queue can function and services can start.

Service start controls

Allow only authorized employees to move guests from the status In Service to Waiting (organization level) β€” when active, undoing a started appointment requires provider authorization. A configurable Back to waiting time limit (in minutes) determines whether authorization is required immediately or only after a set number of minutes have elapsed since the service started.

Make it mandatory for employees to provide a reason if they move guest from the status Being Serviced to Waiting (organization level) β€” when active, staff must select or enter a reason before the undo is confirmed.

Important: Enabling this setting can result in inconsistent wait times because the undo-start process delays reprocessing.

Reasons for queue moved back to 'in service' β€” a separate organization-level configuration that defines the dropdown values offered to staff when undoing a started appointment. This is distinct from the require-reason toggle: one controls whether a reason is required; the other defines the available reason values. Key behaviors:

  • Reasons can only be added at the organization level.
  • Reasons can be edited at both the organization and center levels.
  • Each reason entry includes two additional options:
    • Active β€” when selected, the reason also appears in the membership cancellation screen.
    • Use In Online Booking β€” when selected, the reason also appears in the appointment cancellation screen in Webstore and CMA.

Edit and delete block out time in Queue (organization level) β€” when active, staff can create, edit, and delete blockouts directly from the queue view.

Wait time configuration

The queue calculates estimated wait times using a combination of organization-level and center-level settings. Multiple settings can be active simultaneously and their effects combine.

Enable a default service for all guests in Queue (organization level) β€” when active, Zenoti assigns a configured default service to guests who check in without a pre-booked service. The default service must be associated with the center and all providers must be configured.

Use employee transition time to calculate average guest wait times (organization level) β€” when active, a configured transition duration in minutes is factored into wait time calculations. The center level can override the organization value.

Calculate enhanced wait times based on employee efficiency and guest's service durations in the past (organization level) β€” when active, the queue uses historical performance data. Three sub-fields control how much history to apply: past services to consider for the provider, past services for the guest, and past services for the provider-guest combination.

Allow employees setting up time (in minutes) (organization level) β€” when active, a configured setup duration is added before each service start in wait time calculations. The center level can override the organization value.

Calculate wait time based on (center level) β€” determines the method used for wait time display. Two options are available:

  • Appointment slot interval β€” uses the dynamic calculation based on active organization settings.
  • Configured duration (in minutes) β€” replaces dynamic calculation with a fixed value entered in the accompanying sub-field.

Minimum guest wait time (center level) β€” a minimum eligibility threshold in minutes. Guests must wait at least this long after joining the queue before their service can be started. This is a functional gate, not a display label.

Show guest wait time deviation (organization level, on by default) β€” when active, the queue displays how far the guest's actual wait time has deviated from the estimate. The deviation label text is configurable.

Reschedule queue based on resource availability (center level) β€” when active alongside the queue being enabled at both levels, Zenoti automatically recalculates estimated wait times and provider assignments after each status change. This is the setting that activates queue reprocessing for the center.

Set an auto-delete timer limit for walk-in guests (in minutes) (center level) β€” configures how long a walk-in guest remains in the queue before being automatically removed if no action is taken.

Online checkin and guest in store timer limit (in minutes) (center level) β€” sets the timer applied when a guest has checked in online and is confirmed to be physically present in the center.

Online checkin and guest not in store timer limit (in minutes) (center level) β€” sets the timer applied when a guest has checked in online but is not yet confirmed to be physically present.

No-show and auto-purge

Enable automatic purge of no-show guests from queue (center level) β€” when active and Reschedule queue based on resource availability is also enabled at the center, Zenoti automatically removes guests who have not checked in by their scheduled time and marks them as no-shows. The no-show confirmation dialog includes a Reason List dropdown, an optional Comments field, and a Submit button.

Bypass purge timer limit (in minutes) (center level) β€” sets the duration applied when staff bypass the auto-purge timer for a specific appointment. When staff bypass the purge, this configured value replaces the appointment's remaining purge countdown. It does not add to or extend the remaining time.

Enter label for no-show button (center level) β€” allows each center to configure the text displayed on the no-show action button in the queue.

Room and service forms enforcement

Make it mandatory to select a room for all bookings (center level) β€” when active, staff must select a room for every appointment before the service can start.

Enforce service forms before appointment start β€” controlled at both the center and organization levels. When enabled at the center level, or when the center defers to the organization setting and the organization setting is active, staff must complete required service forms before a service can be started in the queue.

Display and presentation settings

Show unique identification number for guests on queue card β€” when active, the guest's unique identifier appears on the queue card alongside the guest's name.

Show marketing banner β€” when active, a configured banner image or text appears within the queue view.

Show room association on Admin Queue β€” when active, the room assigned to an appointment appears on the queue card.

Add a prefix to Start time to identify walk-in guests β€” when active, a configurable prefix is prepended to the start time displayed on walk-in queue cards, distinguishing them from scheduled entries. The prefix is entered in the For walk-ins, prefix Start time with label field. When a walk-in is added using the Book button, the configured prefix pre-populates in the Start Time field in the Booking Wizard.

Provider performance metrics (organization level) β€” when active, provider performance data appears alongside guest information in the queue. A companion visibility setting controls the default display level for this information.

Appointment and Queue view slide (center level) β€” when active, the appointment book toolbar shows the Queue View / Appointment View dropdown for sliding between the calendar and the queue; when off, a queue-mode center always opens in the queue view.

Show confirmation page in queue view (center level) β€” when active, a confirmation page appears after queue actions such as check-in and status changes.

Frequent service display (center level) β€” controls how many frequently used services appear in the Booking Wizard quick-select list.

Booking Wizard text (organization level) β€” when active, updated text labels appear in the Booking Wizard when it is opened from the queue.

Print appointments (organization level, on by default) β€” when active, staff can print queue appointments using the print icon in the queue toolbar, which opens the Print Appointments dialog.

Queue lock and PIN mode

Lock Queue and convert to view-only mode after a set duration of inactivity β€” when active, the queue switches to view-only mode after the configured period of inactivity and requires a PIN to resume editing.

Key behaviors:

  • Prerequisite: the inactivity duration must be set at the center level. Enabling PIN for individual employees is not a prerequisite for this feature.
  • Manual activation: staff can activate view-only mode at any time from the bottom panel by clicking their name and selecting PIN Mode.
  • Exit: there is no manual exit option. The queue exits view-only mode automatically when the employee navigates away from the Appointment Book. The companion setting Exit PIN mode when employee exits appointment book controls this behavior.

Auto-pay settings

Auto-pay (organization level) β€” when active, Zenoti can automatically process payment for a guest's invoice when the appointment is completed.

Pre-authorization control β€” when pre-authorization is disabled, the system skips the pre-authorization step during auto-pay processing.

For payment processing from the queue, see Payment Integration.

Key features

  • Two-level enablement β€” both the organization-level Enable Admin Queue setting and the center-level Operate appointment book in Queue mode must be active for a center to use the queue. Disabling either deactivates the queue for that center.
  • Flexible vs. ordered queue β€” Allow guest services to start irrespective of the order in Queue switches between flexible ordering (any guest can start) and first-in-first-served. Flexible mode visually highlights all queue cards and removes the Skip button.
  • Appointment Book synchronization β€” when flexible ordering is active and "Automatically move the appointments in the Appointment Book, based on start and complete actions" is enabled, starting or completing services from the queue automatically adjusts Appointment Book block timing and duration, with start times rounding down and completion times rounding up to the nearest slot.
  • Layered wait time calculation β€” estimated wait times can incorporate provider transition time, historical performance data, setup time, or a fixed configured duration, based on which settings are active at the organization and center levels.
  • Inactivity-based queue lock β€” the queue can switch to view-only mode after a configured period of inactivity, with PIN-protected re-entry and automatic exit when the employee navigates away from the Appointment Book.
  • Walk-in identification β€” a configurable prefix on queue card start times distinguishes walk-in entries from scheduled entries, and pre-populates in the Booking Wizard when adding a walk-in via the Book button. The Show walk-in appointments in pink color, in the Queue view setting provides additional visual distinction between walk-ins and call-ahead bookings.
  • Provider availability sidebar β€” the Available Therapists section (also labeled Providers in some configurations) surfaces checked-in providers and supports automatic assignment by idle time.
  • Auto-purge β€” when the Enable automatic purge of no-show guests from queue setting and Reschedule queue based on resource availability are both active at the center level, no-show guests are automatically removed from the queue at their scheduled time.
  • Employee availability source β€” the Employee Availability Source center setting controls whether the queue draws from clocked-in providers only or from all providers scheduled for the day, directly affecting wait time estimates.
Was this article helpful?
Your feedback helps us improve our documentation.