ZenotiHelp

Get started with queue

ZTZenoti Docs Team Updated October 27, 2026 7 min readGuide

The queue is a real-time waiting room dashboard that tracks checked-in guests as they move through their services at your center. It replaces the standard appointment book calendar with a queue-centric view designed for walk-in-heavy environments such as salons, barbershops, and multi-provider service centers. This article covers the prerequisites for enabling the queue, how to access it, the key concepts behind queue ordering and appointment states, and when to use the queue instead of the appointment book.


On this page


Before you begin

Before you can use the queue, ensure the following are in place:

  • Enable Admin Queue at the organization level β€” the queue feature must be turned on in your organization settings. Enable the Enable Admin Queue toggle at the organization level. Without this setting, the queue view is not available at any center.
  • Operate appointment book in Queue mode at the center level β€” after the organization-level toggle is on, enable the queue for each individual center where you want to use it. Enable Operate appointment book in Queue mode for the target center.
  • Center setup β€” the center must be active with at least one provider assigned.
  • At least one Therapist-role employee checked in to the queue β€” before the Available Therapists section populates and before any service can be started, at least one employee with the Therapist role must check in to the queue using the clock icon on the menu bar. The queue cannot start services until this prerequisite is met. Even if all the gating settings are on, the queue is non-functional without a checked-in therapist.
  • Appointments or walk-ins β€” the queue displays checked-in guests, so appointments must be created and checked in (or walk-ins must be added) before they appear in the queue.

Permission: View (under Appointments) β€” required to see the queue view, since the queue is accessed from within the appointment book interface.

Note: The queue is a view mode within the appointment book, not a separate module. It shares the same permissions as the appointment book.


How to access the queue

  1. Log in to Zenoti with your front desk or manager credentials.
  2. Select a center from the center dropdown in the top navigation bar.
  3. Click Appointments in the top menu to open the appointment book.
  4. The appointment book opens in the queue view. If your center has Appointment and Queue view slide enabled, use the view dropdown at the left of the toolbar to switch between the Queue View / Appointment View dropdown.

The queue dashboard replaces the calendar grid with a list-based view organized by appointment state. Guests appear in the queue as soon as they are checked in.

If the appointment book does not open in the queue view:

  • Verify that Enable Admin Queue is enabled at the organization level and Operate appointment book in Queue mode is enabled at the center level.
  • Check that your security profile has View permission under Appointments.

Key concepts

Queue ordering

The queue orders guests based on their check-in time by default. Guests who checked in first appear at the top of the waiting list. This first-come-first-served ordering ensures fairness in walk-in environments.

Two queue ordering modes are available, controlled by the organization-level Allow guest services to start irrespective of the order in Queue setting:

  • First-come-first-served (default) β€” when this setting is off, the queue enforces strict ordering. Guests must be served in the sequence in which they checked in. A Skip button appears on queue cards so staff can move past a guest who is not ready.
  • Any-order service start β€” when this setting is on, services may be started for any waiting guest regardless of their position. All appointment blocks in the queue are visually highlighted to indicate that order is not enforced, and the Skip button is removed from queue cards. Only the Left and Start buttons remain.

Additional factors that influence ordering:

  • Appointment time β€” for pre-booked appointments, the scheduled appointment time may influence ordering relative to walk-ins.
  • Scheduled guest priority β€” when Prioritize guests with scheduled services over walk-in guests is enabled, guests with pre-booked appointments are positioned ahead of walk-in guests in the queue.

The queue recalculates ordering automatically when new guests check in or when appointments change state.

Appointment states in the queue

Each appointment in the queue moves through a progression of states:

State What it means Visual indicator
Waiting The guest has checked in and is waiting to be served. No provider has started the service yet. Appears in Guests Waiting
In Progress A provider has started the service. The guest is actively being served. Appears in Guests Being Serviced
Completed The service is finished. The guest is ready for checkout or additional services. Appears in Completed

Front desk staff advance appointments through these states by clicking action buttons in the queue. For example, clicking Start on a waiting appointment moves it to Guests Being Serviced.

Guest flow through the queue

A typical guest journey through the queue follows these steps:

  1. Guest arrives β€” the guest walks in or arrives for a pre-booked appointment.
  2. Check in β€” front desk staff check in the guest from the appointment book or queue. The guest appears in Guests Waiting.
  3. Assign provider β€” if the guest does not already have an assigned provider (common for walk-ins), the front desk assigns one from the queue.
  4. Start service β€” the provider or front desk clicks Start to move the appointment to Guests Being Serviced. A timer begins tracking service duration.
  5. Complete service β€” when the service is finished, the provider or front desk clicks Mark Completed. The appointment moves to Completed.
  6. Check out β€” front desk opens POS from the queue to process payment and close the invoice.

For guests with multiple services, the queue tracks each service segment individually, advancing through states one at a time. When a multi-service visit is started as a whole from the queue, services are scheduled sequentially β€” each service starts only after the previous one ends.


Queue vs. appointment book

The queue and the appointment book serve different scheduling models. Use this comparison to decide which view suits your center:

Factor Appointment book (calendar view) Queue (waiting room view)
Best for Appointment-driven centers where most guests pre-book Walk-in-heavy centers with high guest turnover
View model Time-based calendar grid with provider rows State-based list (waiting, in progress, completed)
Scheduling Visual time slots; drag-and-drop to reschedule Check-in order; first-come-first-served
Provider assignment Pre-assigned during booking Often assigned on the fly from the queue
Typical industries Medical spas, wellness clinics, appointment-focused salons Barbershops, nail salons, high-volume hair salons

You do not need to choose one or the other permanently. Both views are available within the appointment book, and you can switch between them with the Queue View / Appointment View dropdown in the toolbar (available when Appointment and Queue view slide is on). Some centers use the calendar view for the morning (when pre-booked appointments dominate) and switch to the queue view in the afternoon (when walk-ins increase).


Follow this sequence when you first enable and start using the queue:

Step Task Why
1 Enable Enable Admin Queue at the organization level Makes the queue feature available to all centers
2 Enable Operate appointment book in Queue mode at the center level Activates the queue for your specific center
3 Ensure at least one Therapist-role employee checks in using the clock icon on the menu bar Required before any service can be started in the queue
4 Open the appointment book (with Appointment and Queue view slide on, pick Queue View in the Queue View / Appointment View dropdown) Verify that the queue dashboard loads
5 Check in a test appointment Confirm that checked-in guests appear in Guests Waiting
6 Start and complete the test appointment in the queue Practice advancing an appointment through all three states
7 Process checkout from the queue Verify that POS opens correctly from the queue for payment

Tips

  • Enable the queue only at centers that handle a significant volume of walk-ins. For appointment-only centers, the calendar view is more efficient.
  • Train front desk staff to advance appointments through queue states promptly. Stale entries in Guests Waiting create confusion about which guests have been served.
  • Use the auto-purge feature to automatically remove no-show appointments from the queue after a configurable time. This keeps the dashboard clean during busy periods.
  • If your center uses both pre-booked appointments and walk-ins, use the calendar view to manage the schedule and the queue view to manage the waiting room. Switch views as needed throughout the day.

Next steps

After enabling the queue and completing your initial test:

  • Understand the full queue system β€” read the Queue overview for a comprehensive guide to all queue features and layout options.
  • Configure queue behavior β€” follow Configure queue settings to customize ordering rules, auto-purge, and display preferences.
  • Manage daily guest flow β€” follow Manage guest flow in the queue for step-by-step instructions on checking in, starting, completing, and checking out guests from the queue.

Was this article helpful?
Your feedback helps us improve our documentation.