Manage no-shows and auto-purge
Guests who do not arrive for their appointments or who leave without being served need to be removed from the queue so that remaining appointment times and provider assignments stay accurate. This article covers manually marking guests as no-shows, configuring the auto-purge feature for automatic no-show detection, bypassing the purge timer for specific appointments, and understanding how no-shows affect queue reprocessing.
Audience: Front desk staff who manage guest flow and appointment status in the queue.
On this page
- Before you begin
- Mark a guest as no-show manually
- Auto-purge feature
- Bypass the purge timer
- How no-shows affect queue reprocessing
- Tips
- Troubleshooting
- Related articles
Before you begin
- The Enable Admin Queue setting must be turned on at the organization level, and Operate appointment book in Queue mode must be enabled at the center level.
- You need access to the appointment book in the queue view.
- At least one provider must be checked in via the clock icon on the menu bar before the queue can function and services can start.
Permission: Edit (under Appointments) — Required to mark guests as no-show. The no-show action is available from the queue card and the appointment context menu.
Mark a guest as no-show manually
When a guest does not arrive for their appointment, you can mark them as a no-show directly from the queue:
- In the Guests Waiting section, locate the guest's appointment.
- Click the no-show button on the queue card. The button label may be customized by your administrator using the Enter label for no-show button center setting (for example, "Left" or "Did Not Arrive").
- A confirmation dialog appears with three elements:
- Reason List — Select the reason for the no-show from the dropdown. A reason is required to proceed.
- Comments — Optionally enter additional context about the no-show.
- Submit — Click to confirm the no-show.
- Select a reason from the Reason List dropdown, enter any relevant comments in the Comments field, then click Submit.
- The appointment status changes to no-show and the queue card is removed from the Guests Waiting section.
After marking a no-show:
- The queue reprocesses automatically to recalculate estimated times for all remaining waiting appointments.
- The freed-up provider time becomes available for other guests in the queue.
- All connected users see the updated queue in real time through automatic synchronization.
- The no-show is recorded in the appointment history for reporting purposes.
Note: Marking a guest as no-show is irreversible from the queue. If you need to reverse a no-show, use the appointment book's standard status management tools outside of the queue view.
Note: The reason list used for no-show confirmations is separate from the reasons list used for undo-start actions.
Tip: For a worked example — if a guest named Jamie booked a 30-minute facial but has not appeared after 25 minutes in the Guests Waiting section, click the no-show button, select Guest did not arrive from the Reason List, enter "Called center, no response" in Comments, then click Submit. Jamie's card is removed, and the next guest's estimated start time adjusts immediately.
Auto-purge feature
The auto-purge feature automatically marks overdue appointments as no-shows, removing them from the queue without requiring manual action. This is particularly useful in high-volume centers where staff may not have time to monitor every waiting appointment, or in centers that use kiosk check-in where guests may check in and then leave without being served.
How auto-purge works
When auto-purge is enabled, the system monitors every waiting appointment in the queue against a configurable timer. If a guest's appointment remains in the waiting state past the timer limit, the system automatically marks it as a no-show.
The auto-purge process:
- The system checks each waiting appointment's elapsed time since entering the queue.
- If the elapsed time exceeds the configured timer limit for that appointment's source type, the system marks the appointment as a no-show.
- The no-show triggers queue reprocessing, which recalculates times and assignments for all remaining appointments.
- The auto-purge runs as part of the queue reprocessing cycle.
Auto-purge requires two settings to be active:
| Setting | Level | Description |
|---|---|---|
| Enable automatic purge of no-show guests from queue | Center | Activates the auto-purge feature for the center. |
| Reschedule queue based on resource availability | Center | Queue reprocessing must be active because auto-purge runs during the reprocessing cycle. |
Both settings must be enabled for auto-purge to function. If either is disabled, no automatic no-show marking occurs.
Timer limits by appointment source
Auto-purge uses different timer limits depending on how the appointment was created. This allows you to set different thresholds for different types of guests:
| Appointment source | Timer setting | Description |
|---|---|---|
| Walk-in | Set an auto-delete timer limit for walk-in guests (in minutes) | The number of minutes a walk-in appointment can wait before being auto-purged. Walk-in guests are typically physically present, so this timer may be set longer to give them time to be served. |
| Online check-in (guest in store) | Online checkin and guest in store timer limit (in minutes) | The number of minutes for a guest who checked in online and is confirmed to be physically at the center. These guests have already arrived, so the timer accounts for service delays. |
| Online check-in (no guest in store) | Online checkin and guest not in store timer limit (in minutes) | The number of minutes for a guest who checked in online but has not been confirmed as physically present. This timer is typically shorter because the guest may not have actually arrived. |
Note: Timer limits are configured at the center level. Each center can set its own limits based on its operational patterns. For example, a busy salon might set a shorter timer for online check-ins where the guest is not in store, while a spa might allow a longer window. For queue and kiosk settings, see Configure queue settings.
Bypass the purge timer
In some cases, you may want to prevent a specific appointment from being auto-purged — for example, when a guest has called ahead to say they are running late, or when a guest is given extra wait time.
To bypass the purge timer for a specific appointment:
- In the Guests Waiting section, locate the appointment.
- Select the bypass purge action from the queue card or context menu.
Important: The bypass action replaces the appointment's remaining purge timer with the value configured in the Bypass purge timer limit (in minutes) center setting. It does not add the bypass value to the remaining time.
For example, if the walk-in purge timer is set to 30 minutes, the appointment has 8 minutes left on the timer, and Bypass purge timer limit (in minutes) is set to 15 minutes, then bypassing the purge resets the appointment's timer to 15 minutes. The remaining 8 minutes is replaced, not added to. The appointment now has a fresh 15-minute window before auto-purge would mark it a no-show.
Key points about bypass:
- Bypass applies only to the selected appointment. Other appointments in the queue continue to follow the standard purge timer.
- You can bypass the timer multiple times on the same appointment if the guest needs more time. Each bypass resets the timer to the configured Bypass purge timer limit (in minutes) value.
- The bypass action is recorded in the appointment's change log for auditing purposes.
- Bypass does not affect manual no-show marking. You can still manually mark a bypassed appointment as a no-show at any time.
How no-shows affect queue reprocessing
When an appointment is marked as a no-show — whether manually or through auto-purge — the queue reprocessing engine performs the following:
- Removes the appointment from the active queue. The no-show appointment is no longer considered when calculating wait times and queue positions.
- Frees the provider's time slot. If the no-show appointment had a provider assigned, that provider's schedule opens up for the next waiting guest.
- Recalculates estimated start times. All remaining waiting appointments receive updated estimated start times based on the newly available provider time.
- Updates queue positions. Guests behind the no-show move up in the queue.
- Triggers notifications. If a guest becomes next in line as a result of the no-show, they receive a next-in-line notification (if configured).
- Updates center wait time. The overall center wait time display is recalculated to reflect the shorter queue.
This automatic recalculation ensures that no-shows do not leave gaps in the schedule and that the remaining guests benefit from the freed-up time.
Tips
- Customize the no-show button label to match your center's terminology. If your front desk staff refer to guests who leave as having "Left" or "Walked Out," configure the Enter label for no-show button center setting accordingly. This reduces confusion during busy periods.
- Set shorter timers for online check-ins without store confirmation. Guests who check in online but do not confirm physical arrival are more likely to be no-shows. Setting the Online checkin and guest not in store timer limit (in minutes) lower than your walk-in timer helps keep the queue accurate without manual intervention.
- Use the bypass action proactively. If a guest calls the center to say they are running a few minutes late, bypass the purge timer immediately rather than waiting for the automatic no-show to occur. This prevents the guest from being removed from the queue and having to re-check in on arrival.
- Review no-show patterns in reports. Frequent no-shows at certain times of day or from specific appointment sources may indicate an issue with check-in workflows or guest communication. Use the appointment history and reporting tools to identify trends.
- Coordinate with kiosk check-in. When your center uses the kiosk for guest self-service check-in, the auto-purge timers for online check-ins apply. Ensure your timer limits account for the time guests may spend at the kiosk. For guest kiosk, see front-desk-kiosk.
Troubleshooting
The no-show button does not appear on the queue card.
- Confirm that the guest's appointment is in the Guests Waiting section. The no-show action is only available for waiting appointments, not for appointments that are already in the Guests Being Serviced or Completed sections.
- Verify that your role has the Edit permission under Appointments. If you do not see the no-show button, contact your administrator to confirm your access.
Auto-purge is not marking overdue appointments as no-shows.
- Check that both Enable automatic purge of no-show guests from queue and Reschedule queue based on resource availability are enabled at the center level under Configuration > Appointments > Queue. Both settings must be active for auto-purge to run.
- Verify that the timer limits (Set an auto-delete timer limit for walk-in guests (in minutes), Online checkin and guest in store timer limit (in minutes), Online checkin and guest not in store timer limit (in minutes)) are set to a value greater than zero. A timer value of zero may prevent auto-purge from triggering.
The bypass action does not appear to extend the timer as expected.
- Remember that bypass replaces the remaining purge timer with the Bypass purge timer limit (in minutes) value — it does not add to it. If the bypass timer limit is set to a value lower than the original timer limit, the appointment may have less time remaining after a bypass than before. Review the Bypass purge timer limit (in minutes) setting and adjust it to a value appropriate for your center's needs.
After a no-show, the queue did not reprocess and wait times did not update.
- Queue reprocessing requires Reschedule queue based on resource availability to be enabled at the center level. If this setting is disabled, the queue will not automatically recalculate times after a no-show. Enable the setting and confirm queue reprocessing is active. For more detail, see Understand queue reprocessing.