Configure voice settings
Voice settings in HyperConnect control how your center handles inbound and outbound phone calls β from the automated phone tree callers hear, to how missed calls are forwarded, to how callers wait in a queue when agents are busy. Configuring these settings ensures calls are routed efficiently and callers have a professional experience.
Scope: Voice settings are center-level. Each center can have different voice configurations.
Tip: If you are setting up voice for the first time, configure in this order: (1) Welcome greetings, (2) Business hours, (3) Call routing, (4) Voicemail, (5) Phone tree. This ensures basic functionality before advanced features.
On this page
- Voice configuration areas
- Phone tree (IVR)
- Missed call forwarding
- Call queuing
- Call masking
- Automatic call recording
- Welcome greeting
- Hold greeting
- Voicemail greetings
- Call forwarding
- Agent transfer
- Call parking
- Spam call detection
- Emergency calling
- Media redaction / privacy protection
- Enable calls only on phone device
- Device-user association
- Enable calls on ZMA (Zenoti Mobile App)
- Call center (hub-spoke)
Before you begin
Permissions: Go to Configuration > Security > Security Roles > select a role > scroll to the Zenoti HyperConnect section. The following permissions are required:
- Connect Access Enable β Base access to HyperConnect.
- Enable Incoming Calls and/or Enable Outgoing Calls β Required for voice call functionality.
- HyperConnect must be enabled for your organization.
- A voice phone number must be assigned to your center.
Voice configuration areas
The Voice tab in HyperConnect settings contains the following configuration areas. To access voice settings: open HyperConnect from Chat > click the Settings icon > select the Voice tab.
Phone tree (IVR)
The phone tree is the automated menu system callers hear when they dial your center (e.g., "Press 1 for Appointments, Press 2 for General Inquiries"). It routes callers to the right person or service without requiring a live agent to answer every call.
Key settings: Node types (Welcome Greeting, Menu, Transfer Call, Voicemail, SMS, Play Audio, Operational Hours, AI voice agent node, Call Queue, SmartBot, Call Percentages, Hang Up), DTMF key mappings, flow branching.
See Configure a phone tree (IVR) for step-by-step instructions.
Missed call forwarding
Missed call forwarding rules determine how unanswered calls, after-hours calls, and overflow calls are handled. You can configure forwarding delays, destination types (agent, external number, voicemail), and time-of-day routing.
Key settings: Missed call forwarding toggle, forward delay (business hours and after hours), forwarding destination, failover routing.
Note: For call distribution methods (Ring all, Fixed order, Round Robin, Ring groups), see Configure call routing.
See Configure missed call forwarding and routing rules for details.
Call queuing
Call queuing places callers on hold with music when all agents are busy. You configure hold music, queue position announcements, wait time limits, and agent assignment modes.
Key settings: Hold music (.mp3, max 10 MB), queue position announcements, estimated wait time, maximum wait time, maximum callers in queue, agent assignment mode (manual/automatic), transitions (overflow behavior).
See Set up call queuing for configuration steps.
Call masking
Call masking lets your center display a consistent phone number on all outgoing calls β so regardless of which agent places a call, the guest sees the same display number.
Important: The number you enter in the Display Number field must be a number owned or managed by the Zenoti telephony service. You cannot enter your center's own external phone line β that number will be rejected regardless of how it is formatted. If you want guests to see your existing business number, the supported path is to port that number into the Zenoti telephony service (one number per center). Contact your Zenoti account representative to initiate a port.
HyperConnect supports three separate call masking options. Each is an independent setting:
- Mask all calls with a specific number β All outgoing calls from this center display one fixed number.
- Show all call center numbers while placing the call β Agents can choose which call center's registered number is used to mask an outbound call at the time of dialing.
- Show non-center numbers while placing the call β Agents can choose from numbers defined under General > Additional Numbers when making an outbound call.
To enable call masking:
- Open HyperConnect from Chat.
- Click the Settings icon.
- Navigate to the Voice tab.
- Turn on Enable the Call Masking feature.
- Select one or more masking options:
- Mask all calls with a specific number β In the Display Number field, enter a Zenoti-managed phone number. This number will be shown to the guest.
- Show all call center numbers while placing the call β When an agent dials out and multiple masking numbers are registered, the registered numbers are presented as a selectable list at dial time so the agent can choose which number the guest sees.
- Show non-center numbers while placing the call β Agents choose from numbers configured under General > Additional Numbers.
- If displaying this number for all locations, enable Display this number for all locations. This applies a single registered masking number uniformly across all child centers in the organization, overriding any per-center masking number for outbound caller ID.
- Click Save.
Tip: Call masking is especially useful for organizations with multiple locations that want guests to see a single main contact number. To use your existing business number, port it into the Zenoti telephony service β one number per center.
Automatic call recording
HyperConnect supports automatic call recording for both incoming and outgoing calls.
- Open HyperConnect from Chat and click the Settings icon.
- Navigate to the Voice tab.
- Enable Record all incoming calls automatically to record every inbound call from the moment it is answered.
- Enable Record all outgoing calls automatically to record every outbound call placed by agents.
- Click Save.
Note: If automatic recording is enabled, ensure your welcome greeting informs callers that the call may be recorded, as required by applicable laws.
Welcome greeting
Configure a welcome greeting that plays when a call connects. HyperConnect supports separate greetings for incoming and outgoing calls. Greeting files must be in MP3 format and must not exceed 5 MB.
Incoming call greeting (callers hear when they call your center):
- In the Voice tab, navigate to Welcome greeting.
- Configure the incoming greeting: click Upload voice file to upload an MP3 audio file (max 5 MB), or use the text-to-speech option.
- Click Save.
Outgoing call greeting (guests hear when an agent calls them):
- In the Voice tab, navigate to the outgoing Welcome greeting section.
- Upload an MP3 audio file (max 5 MB) for the outgoing greeting.
- Click Save.
Hold greeting
Configure the audio callers hear when placed on hold. The hold greeting file must be in MP3 format and must not exceed 5 MB.
- In the Voice tab, navigate to Hold greeting.
- Upload an MP3 audio file (max 5 MB) that plays when a caller is placed on hold.
- Click Save.
Voicemail greetings
Configure voicemail greetings for business hours and after hours.
Business hours voicemail:
- In the Voice tab, enable Allow guests to leave a voicemail during business hours.
- Choose a pre-set greeting or upload a custom greeting (MP3, max 5 MB).
- Click Save.
Post business hours voicemail:
- Configure a separate voicemail greeting for after hours.
- Click Replace to upload a new greeting file (MP3, max 5 MB).
- Click Save.
Call forwarding
Configure where unanswered calls are forwarded. HyperConnect supports three forwarding destinations:
- Forward to voicemail β routes the caller to your voicemail greeting
- Forward to SmartBot β hands the call to SmartBot for automated handling. For SmartBot AI chatbot details, see SmartBot overview.
- Forward to a phone number β redirects to an external number
- In the Voice tab, navigate to Call forwarding settings.
- Select your forwarding destination.
- Set separate forwarding rules for business hours and post business hours configurations:
- Configure the delay (in seconds) before the call is forwarded when unanswered.
- If forwarding to voicemail or SmartBot, configure the transfer duration β how long the call rings before being transferred.
- Click Save.
See Configure call routing for call distribution method configuration.
Agent transfer
The Agent transfer section controls how agents hand off active calls to other agents.
- In the Voice tab, navigate to Agent transfer.
- Set the Transfer mode:
- Blind transfer β The agent connects the caller directly to the next agent without speaking to that agent first. The originating agent's call ends immediately upon transfer.
- Warm transfer β The originating agent consults the next agent before connecting the caller, allowing a brief introduction or handoff context. During a warm transfer, the originating agent can complete the transfer or return to the guest. If the target agent does not answer, the guest remains on hold and the originating agent can try another recipient or return to the guest.
- Per call β The agent chooses between blind and warm transfer each time they initiate a transfer.
- Click Save.
Call parking
Call parking lets agents place an active customer call on hold so that any other available agent can retrieve it from any device.
- In the Voice tab, navigate to Call Parking.
- Enable Enable the call parking feature.
- Set Maximum call park time (in seconds).
- Click Save.
Note: When a call is parked, the system displays a pin on screen. A colleague retrieves the parked call by entering the pin prefixed with an asterisk in the parked-call field from any device.
Spam call detection
HyperConnect can automatically identify and filter spam calls using two distinct modes.
- In the Voice tab, navigate to Spam Call Detection.
- Enable Enable the spam call feature.
- Choose a detection mode under How should spam calls be handled?:
- Automatically block spam calls β Identified spam calls are rejected before ringing any agent. Blocked callers do not reach your team.
- Show a warning and allow the agent to decide β Flagged calls ring through normally, but agents see a spam warning indicator on the incoming call notification. The agent decides whether to answer.
- Click Save.
To mark a previously blocked number as safe:
- Navigate to the Spam and Blocked Calls report.
- Locate the blocked number.
- Click Mark safe.
The number is removed from the blocked list and future calls from that number will ring through normally.
Emergency calling
Configure emergency calling (E911) to ensure accurate location information is transmitted when an emergency call is placed from your center.
- In the Voice tab, navigate to Emergency Calling.
- Enable Enable Emergency Calling.
- Enter the required address fields:
- Business name
- Address friendly name
- Address line 1 and Address line 2
- City, State, Postal code, Country
- Click Save.
Note: After saving, the address goes through a verification process. Emergency calling is activated once the address has been verified.
Media redaction / privacy protection
Enable media redaction to automatically remove sensitive personal information from call recordings and transcripts.
- In the Voice tab, navigate to the Privacy protection section.
- Enable the Enable media redaction toggle.
- Click Save.
When enabled, the system automatically redacts sensitive information (such as payment card numbers) from call recordings and transcripts, protecting guest privacy and supporting compliance requirements.
Enable calls only on phone device
Restrict voice calls to physical phone devices only, disabling browser-based calling.
- In the Voice tab, enable Enable Calls Only on Phone Device.
- When enabled, agents can only make and receive calls using a registered physical phone device, not through the browser.
- Click Save.
Device-user association
Configure how physical phone devices are associated with users. Navigate to the Settings icon > Voice tab > Device-User Association section.
HyperConnect supports three association types:
- Dynamic (Phone device) β The physical phone is linked to the employee's current browser session. Dynamic phone-device association works in a single browser only. If the browser cache is cleared, the phone defaults to the last logged-in user until the association is re-established.
- Dynamic (Soft phone) β The software voice client is linked to the employee's browser session. Association is released when the employee logs out.
- Specific Employee (Static) β The physical phone is permanently assigned to one employee. The association persists across all sessions.
Note: When using Dynamic (Phone device) association, clearing the browser cache can disconnect the phone-user link. Re-establish the association in the Device-User Association section of the Voice tab. Physical phone provisioning requires the Manager, Administrator, or Owner role.
To remove a physical phone device, click Remove next to the device in the Device-User Association section.
See Configure a physical phone device for detailed setup steps.
Enable calls on ZMA
Enable voice calling on the Zenoti Mobile App (ZMA) so that employees can make and receive calls from their mobile devices.
- In the Voice tab, enable Enable calls on ZMA.
- Click Save.
When enabled, employees with the Zenoti Mobile App can receive incoming call notifications and place outbound calls directly from the app. See Use HyperConnect on the Zenoti Mobile App for mobile-specific features and minimum app version requirements.
Call center (hub-spoke)
The hub-spoke model lets a central call center (hub) handle calls for multiple satellite centers (spokes). This is useful for multi-location businesses that want to consolidate call handling.
See Set up a call center (hub-spoke model) for setup instructions.
Tips
- Upload MP3 files within the size limit. Welcome, hold, and voicemail greeting files must be MP3 format and must not exceed 5 MB. IVR audio files used in the phone tree can be up to 10 MB. Uploading a file that exceeds the limit will fail silently β verify file size before uploading.
- Test your phone tree before going live. After configuring the phone tree, call your center's number from an external phone to verify that each menu option routes correctly and that all audio files play as expected.
- Use the Warning spam mode first. If you are enabling spam detection for the first time, start with Show a warning and allow the agent to decide rather than Automatically block spam calls. This lets your team review flagged calls before committing to automatic blocking, and you can use Mark safe to whitelist any legitimate callers that were incorrectly flagged.
- Port your number before configuring call masking. If you want guests to see your existing business phone number on outgoing calls, initiate a number port with your Zenoti account representative before configuring the Display Number field. Entering an unported external number in that field will result in an error.
- Re-establish dynamic phone associations after cache clears. If agents report that their physical phone is no longer receiving calls, navigate to Settings icon > Voice tab > Device-User Association and re-link the device to the correct employee.
Troubleshooting
Agents are not receiving inbound calls.
- Confirm the agent's role includes the Enable Incoming Calls permission under Configuration > Security > Security Roles > Zenoti HyperConnect.
- Check whether the agent has Do Not Disturb enabled in the app header. When DND is active, inbound calls are silenced and routed to voicemail or the next available agent.
- Verify that the center's voice phone number is active and assigned.
The call masking Display Number field shows an error.
- The number entered must be owned or managed by the Zenoti telephony service. Your center's own external phone line cannot be used as the display number. To use your business number, contact your Zenoti account representative to port it into the Zenoti telephony service (one number per center).
Voicemail greetings are not playing for callers.
- Confirm that Allow guests to leave a voicemail is enabled in the Voice tab.
- Verify that the greeting file is MP3 format and does not exceed 5 MB. Re-upload if necessary.
- Check that the missed call forwarding destination is set to Forward to voicemail for the relevant time window (business hours or post business hours).