ZenotiHelp

Use call parking and transfers

ZTZenoti Docs Team Updated October 30, 2026 6 min readGuide

Call parking lets you place an active call on hold so that any authorized agent β€” from any device β€” can pick it up using the pin the system assigns to that parked call. Call transfers let you send an active call to another agent directly. HyperConnect supports both blind (direct) and warm (attended) transfers.

Audience: Front desk agents and call center staff who handle live voice calls in HyperConnect.


On this page


Before you begin

Permission: Go to Configuration > Security > Security Roles > select a role > scroll to the Zenoti HyperConnect section. The following permissions are required:

  • Connect Access Enable β€” Base access to HyperConnect.
  • Enable Incoming Calls and/or Enable Outgoing Calls β€” Required for voice call functionality.
  • You must be on an active call in HyperConnect before you can park or transfer it.
  • Call parking must be enabled in your center's voice settings. If the Park action does not appear on the live-call screen, ask your administrator to enable the call parking feature and set the Maximum call park time under Settings > Voice.
  • The transfer type available to you β€” Blind transfer, Warm transfer, or Per call (agent's choice) β€” is configured by your administrator in the Agent transfer section of your center's voice settings. If only one transfer type is configured, the agent cannot override it per call.
  • Any authorized agent on any device can pick up a parked call β€” they do not need to be the original agent.

Steps

Park a call

Use parking when you need to hand a call to a colleague but do not know who will take it, or when you need to step away momentarily and have someone else in the center continue the conversation.

  1. During an active call, click Park.
  2. The system parks the call. The caller hears hold music or your center's configured hold message.
  3. Note the pin shown in the park confirmation and share it with the colleague who will pick up the call β€” for example, tell them "the call is parked at pin 201."

Note: A call stays parked until a colleague picks it up or until the Maximum call park time configured in your center's voice settings is reached.

Important: If you are using physical phone devices, a device reboot may be required after call parking is first enabled. Plan this during off-hours to avoid interrupting active calls.

Pick up a parked call

Any authorized agent β€” on any device, including a physical phone β€” can pick up a parked call.

  1. In HyperConnect, locate the parked-call field.
  2. Enter the pin prefixed with an asterisk β€” for example, *201 β€” then confirm.
  3. The system connects you to the caller and the call resumes.

Transfer a call β€” Blind transfer

A Blind transfer immediately connects the caller to the target agent or extension. You are disconnected as soon as the transfer is initiated, without speaking to the target agent first.

Use blind transfers when the target agent is already aware of the caller's request, or when the call does not require a handoff briefing. Blind transfer is available when your center's Transfer mode is set to Blind transfer or Per call.

  1. During an active call, click Transfer.
  2. Select the target agent or enter an extension number.
  3. Select Blind transfer.
  4. The system immediately connects the caller to the target. You are disconnected from the call.

HyperConnect records the transfer event in the call log so you can review transfer patterns in your call analytics dashboard.

Transfer a call β€” Warm transfer

A Warm transfer places the caller on hold while you speak with the target agent. Once you have briefed the target agent, you complete the transfer and the caller is connected to them.

Use warm transfers when you need to give the target agent context before they speak with the caller. Warm transfer is available when your center's Transfer mode is set to Warm transfer or Per call.

  1. During an active call, click Transfer.
  2. Select the target agent or enter an extension number.
  3. Select Warm transfer.
  4. The caller is placed on hold. You are connected to the target agent for a consultation.
  5. Brief the target agent on the caller's request.
  6. Click Complete transfer to connect the caller with the target agent. You are disconnected from the call.

Note: If the target agent declines or does not answer during the warm transfer consultation, the guest is still on hold; try another recipient or return to the guest. The system notifies you that the target did not answer so you can take next steps.

Note: The transfer type β€” Blind transfer or Warm transfer β€” is logged in HyperConnect's call records along with the source agent, target agent, and duration after transfer.

Return to the guest during a warm transfer

If the target agent does not answer, or if you decide not to complete the transfer, you can return to the guest at any time during the warm transfer consultation.

  1. During the warm transfer consultation, click Return to guest.
  2. A confirmation prompt appears: Returning to guest will end the current warm transfer and guest unholds. Continue?
  3. Click Continue (or the equivalent confirm action).
  4. The system disconnects the consultation leg with the transfer target and reconnects you to the caller. The caller is taken off hold.

Important: Returning to the guest ends the warm transfer entirely. The target agent's consultation leg is disconnected. To transfer again, you must initiate a new transfer.

Manage multiple calls with hold and parking

HyperConnect provides hold and parking to help you manage more than one caller at a time.

Scenario What to do Result
You are on a call and a second call arrives Click Hold on the active call, then answer the new call The first caller hears hold music; you handle the second call
You need a colleague to take a call but do not know who will pick it up Click Park on the active call The caller hears hold music; any agent enters the pin prefixed with an asterisk to pick it up
You need to transfer and brief the target Click Transfer > Warm transfer The caller waits on hold while you speak with the target, then complete the transfer
You need to transfer immediately Click Transfer > Blind transfer The caller is connected to the target immediately; you are disconnected

Note: HyperConnect does not support conference calling (three-way calls). You can be actively connected with only one caller at a time. Use hold or parking to manage multiple callers sequentially.


Tips

  • Share the pin promptly. When you park a call, tell the colleague picking it up the pin right away. The longer the caller waits, the more likely they are to hang up.
  • Use warm transfers for complex inquiries. If a caller has provided background that the next agent needs, a Warm transfer prevents the caller from repeating themselves.
  • Check maximum park time. Ask your administrator what your center's Maximum call park time is so you know how long a parked call remains available before it expires.

Troubleshooting

The Park action does not appear on my live-call screen. Call parking must be enabled in your center's voice settings. Ask your administrator to turn on the call parking feature under Settings > Voice and verify that a Maximum call park time has been set.

I entered the pin with an asterisk but the parked call did not connect. Verify that you entered the correct pin and that the call is still parked β€” it may have been picked up by another agent, or the Maximum call park time may have elapsed. Ask the original agent to confirm the pin or re-park the call if needed.

The target agent did not receive my warm transfer. If the target agent was unavailable, the guest is still on hold; try another recipient or return to the guest. Confirm the target agent's availability before attempting a warm transfer again, or use a Blind transfer if availability is uncertain.


Was this article helpful?
Your feedback helps us improve our documentation.