Make and receive voice calls
HyperConnect provides a built-in voice system for making and receiving calls directly from your browser. Incoming calls display the guest's profile automatically, and outgoing calls can be placed from the dialer, search results, guest timeline, or an active chat conversation.
Audience: Front desk staff and agents who handle inbound and outbound voice calls in HyperConnect.
On this page
- Before you begin
- Receive an inbound call
- Place an outbound call
- Manage an active call
- After the call
- Access call recordings
- Access call transcripts
- Call parking
- Call masking
- Do Not Disturb (DND)
- Spam call filtering
- Limitations
- Call types
- Related articles
Before you begin
Permissions: Go to Configuration > Security > Security Roles > select a role > scroll to the Zenoti HyperConnect section. The following permissions are required:
- Connect Access Enable β Base access to HyperConnect.
- Enable Incoming Calls and/or Enable Outgoing Calls β Required for voice call functionality.
- HyperConnect voice must be provisioned and enabled for your center.
- Use a supported browser: Chrome, Mozilla Firefox, Safari, or Opera.
- Allow browser microphone access when prompted.
- For the phone number that guests see when your center calls them, see Configure voice settings.
Steps
Receive an inbound call
When someone calls your center's phone number, HyperConnect displays an incoming call notification.
- An incoming call notification appears in the HyperConnect interface, showing the caller's phone number. If the caller matches a guest in your database, the guest's name and photo appear instead.
- Choose an action:
- Click Answer to pick up the call.
- Click Decline to reject the call. The caller is routed to the next available agent, voicemail, or forwarding destination based on your center's routing rules.
- Click Send to Voicemail to redirect the caller to voicemail (if voicemail is enabled).
- During the call, the guest's profile, appointment history, and past interactions are displayed alongside the call controls.
Note: If the caller is not recognized (the phone number does not match any guest record), HyperConnect displays the raw phone number. You can associate the caller with a guest profile during or after the call.
Place an outbound call
You can place outbound calls from four entry points in HyperConnect.
From the dialer:
- Open HyperConnect from Chat in the main navigation.
- Click the phone icon in the HyperConnect header to open the dialer.
- Enter the phone number using the dial pad.
- Click the call button to initiate the call.
From search results:
- Search for a guest in HyperConnect.
- In the search results, click the call icon next to the guest's name.
- The call initiates with the guest's profile displayed.
From the guest timeline:
- Open a guest's timeline.
- Click the guest's phone number.
- The call initiates and the guest's profile is displayed.
From a chat conversation:
- Open HyperConnect and click the Conversations icon.
- Open an active chat conversation with the guest.
- Click the phone icon to initiate a voice call.
- The call initiates with the guest's profile and chat history visible alongside the call controls.
Manage an active call
During an active call, the following controls are available:
| Action | Description |
|---|---|
| Mute | Mute your microphone. The caller cannot hear you. |
| Hold | Place the caller on hold. The caller hears hold music. |
| Park | Park the call so another agent can pick it up using the pin shown on screen when the call is parked. See Use call parking and transfers. |
| Transfer | Transfer the call to another agent or extension. See Use call parking and transfers. |
| End Call | Disconnect the call. |
Warm transfer β Return to guest action
When performing a warm transfer, the system connects you privately with the transfer recipient before the original caller is connected. During this consultation leg, you can complete or cancel the transfer:
- Click Complete transfer to connect the caller to the transfer recipient and drop off the call.
- Click Return to guest to cancel the warm transfer and return to the caller.
Before the Return to guest action takes effect, the system displays a confirmation prompt:
Returning to guest will end the current warm transfer and guest unholds. Continue?
Upon confirmation, the system unholds the caller, disconnects the consultation leg with the transfer recipient, and restores the active call between you and the caller.
After the call
When a call ends, the system automatically:
- Records the call duration and disposition in the call log
- Associates the call with the guest record (if matched)
- Triggers call recording and transcription (if automatic recording is enabled)
- Runs sentiment analysis on the recording (if configured)
After ending a call, you can take the following post-call actions:
- Classify the call β Assign a call category (Appointment, Purchases, or Others) to help managers filter and analyze call types.
- Add notes β Add internal notes about the call for future reference. Notes are visible to other agents viewing the guest's history.
- Send a follow-up message β Open the guest's conversation and send an SMS or WhatsApp follow-up (for example, a booking confirmation link).
You can review completed calls in the call logs. See Manage call recordings and transcripts.
Access call recordings
If automatic recording is enabled for your center (Record all incoming calls automatically or Record all outgoing calls automatically setting), you can play back recordings from two locations:
- From call logs: Open HyperConnect from Chat > click the phone icon in the header to open the dialer area, then navigate to Analytics > Call Logs. Locate the call entry with a recording indicator and click the Play icon.
- From the conversation view: Open a guest's conversation, locate the call entry in the timeline, and click the Play icon.
For details on flagging, deleting, and managing recordings, see Manage call recordings and transcripts.
Access call transcripts
When call recording is enabled, the system generates a text transcript of the conversation. Transcripts are accessible from two entry points:
From Call Logs:
- Open HyperConnect from Chat > click the phone icon in the header.
- Navigate to Analytics > Call Logs.
- Click on the recorded call entry.
- Scroll to the Transcript section in the call details panel.
From a guest's conversation:
- Open the guest's conversation in HyperConnect.
- Locate the call entry in the conversation history.
- Click View transcript to open the full transcript.
Permission for transcript access: To view transcripts, your role must have Call Recording and Transcript and call analysis enabled. Go to Configuration > Security > Security Roles > select a role > scroll to the Zenoti HyperConnect section to verify these permissions are enabled.
Voicemail playback is governed by a different permission, Voicemails β holding transcript access does not imply it. See Manage voicemails.
For full details, see Manage call recordings and transcripts.
Call parking
Call parking lets you place an active call so another agent can pick it up using the pin shown on screen when the call is parked β useful when the caller needs to speak with a specific person or department. When you park a call, the caller hears hold music until another agent retrieves it. For detailed steps, see Use call parking and transfers.
Note: If a physical phone device reboots while a call is parked on that device, the parked call may be lost. Ensure devices are stable before parking calls. For device troubleshooting, see Troubleshoot HyperConnect issues.
Call masking
HyperConnect provides two separate call masking features:
- Outbound caller ID masking β Displays a single, centralized phone number on all outgoing calls, regardless of which agent places the call. You configure this centralized number as the Display number in voice settings. This maintains consistent brand identity and prevents guests from seeing individual agent phone numbers.
- Guest contact info masking β Hides guest phone numbers and personal information from agent screens during calls. When enabled, agents see masked contact details in the call pop-up and conversation view. This protects guest privacy in shared or call center environments.
To configure either masking option, see Call Masking and Configure voice settings.
Do Not Disturb (DND)
Do Not Disturb is an employee-level setting that silences all inbound voice calls for you. When DND is active:
- Incoming calls are silenced and do not ring on your device or browser.
- Calls are automatically routed to voicemail or the next available agent based on your center's routing rules.
- You can still place outbound calls and handle messaging conversations.
To toggle DND:
- Open HyperConnect from Chat in the main navigation.
- Click the DND button in the HyperConnect app header to enable or disable DND.
- Alternatively, open your employee settings: click the Settings icon in HyperConnect, then toggle Do not disturb under the notification preferences.
Tip: When DND is active, a banner appears at the top of the HyperConnect interface reminding you that your status is set to Do Not Disturb. To receive calls again, click the DND button in the header to disable it.
For full details on employee settings, see Configure user settings.
Spam call filtering
HyperConnect includes built-in spam call detection that operates in one of two modes:
| Mode | Behavior |
|---|---|
| Automatically block spam calls | Automatically blocks identified spam calls. Blocked calls do not ring and are logged in the Spam and Blocked Call report. |
| Show a warning and allow the agent to decide | Flags calls as suspected spam while still allowing them to ring. The agent sees a spam warning indicator on the incoming call notification. |
Your administrator configures the spam detection mode in voice settings. See Configure voice settings.
Review spam calls and mark false positives as safe
If a legitimate call is incorrectly flagged or blocked as spam, you can mark it as safe:
- Open HyperConnect from Chat > click the phone icon in the header.
- Navigate to Analytics > Call Logs.
- Navigate to the Spam and Blocked Calls section.
- Locate the incorrectly flagged call.
- Click Mark safe to remove the spam classification. The caller's number is unblocked and future calls from that number are no longer flagged.
Limitations
- Conference calling: HyperConnect does not support conference calling (three-way or multi-party calls). Voice calls are limited to two-party connections between the agent and the caller.
- International calling: International calling is disabled by default. Availability depends on your phone number configuration and carrier support for the destination country. Contact your administrator or support team to enable international calling if needed. International calls are tracked separately in call logs and can be filtered using the International filter.
Call types
HyperConnect classifies every call into one of three types:
| Type | Description |
|---|---|
| Inbound | A call received from a guest or external number. |
| Outbound | A call placed by an agent to a guest or external number. |
| Missed | An inbound call that was not answered within the configured ring duration. |
Tips
- Keep DND off during your shift unless you are unavailable β when DND is on, inbound calls route to voicemail or the next agent, which can increase wait times for guests.
- Park rather than hold for long waits β parked calls can be picked up by any available agent, whereas a held call stays with you. Use parking when you need to hand off to a colleague.
- Add a call note immediately after hanging up β the post-call panel is open and ready. Notes added here appear in the guest's timeline and help the next agent who views the conversation.
Troubleshooting
| Problem | Resolution |
|---|---|
| Inbound calls are not ringing | Check that DND is disabled in the app header. Verify that Enable Incoming Calls is enabled for your role under Configuration > Security > Security Roles > Zenoti HyperConnect. Confirm your browser has microphone permission. |
| Outbound calls fail to connect | Verify that Enable Outgoing Calls is enabled for your role. Confirm the phone number format includes the country code. If calling internationally, confirm international calling is enabled for your center. |
| Recording or transcript is not available after a call | Confirm that Record all incoming calls automatically or Record all outgoing calls automatically is enabled in voice settings. Transcripts are generated after the recording is processed β wait a few minutes and refresh. If the issue persists, see Manage call recordings and transcripts. |