Benefits configuration
Membership benefits define what guests receive as part of their membership. You configure credits and discounts in dedicated top-level tabs on the membership wizard β the service credits tab (which covers two benefit sub-sections), the service discounts tab, and PRODUCT DISCOUNTS β and you can configure them when you first create a membership or any time after.
Note: For conceptual background, see Memberships overview.
Important: Products receive discounts only β there are no product credits or free product units. Free credits apply to services, classes, and workshops only.
Audience: Administrators
On this page
- Before you begin
- Where you configure benefits
- Membership-global settings
- Steps
- Track discount redemptions
- Benefit expiration (per-credit)
- Benefits after expiry or termination
- Setup fee benefit inheritance
- Editing benefits on existing memberships
- Tips
- Troubleshooting
- What to configure next
Before you begin
Permission: Edit (under Memberships) β allows modifying membership benefits. Admin path: Configuration > Security > Security roles > [your role] > Marketing Manager > Memberships > Edit
- The membership must already exist before you configure benefits. See Create a membership. You can also configure benefits during initial membership creation.
- Confirm which benefit types your organization needs (service credits, credit amount, service discounts, product discounts, or any combination).
Where you configure benefits
Credits and discounts are configured in their own top-level tabs on the membership wizard. They are not configured inside the GENERAL tab β that tab holds the benefits mode selector, which determines which benefit tabs appear, along with Advanced Properties.
| Benefit | What it configures | Where you configure it |
|---|---|---|
| Service credits | Quantity-based free or discounted services per accrual period. | The service credits tab β first benefit sub-section. |
| Credit amount | Monetary credit balance the guest can spend on services, products, or both (pool-restricted). | The service credits tab β second benefit sub-section. |
| Service discounts | Percentage or flat-rate discount on services, set at first-layer category, sub-category, or individual service. | The service discounts tab. |
| Product discounts | Percentage or flat-rate discount on products, with per-line or per-unit application. | The PRODUCT DISCOUNTS tab. |
The captions of the credits and discounts tabs are composed from your organization's own labels for services and amenities, so the exact wording you see varies by organization. The PRODUCT DISCOUNTS tab caption is fixed.
Availability: The service discounts tab appears only when service discounts are enabled for your organization and member pricing is turned off for the organization. The PRODUCT DISCOUNTS tab appears only when product discounts are enabled for your organization. When amenities are enabled, the credits and discounts tab captions also include your organization's amenities label.
The first-layer service categories that service credits, credit amount, and service discounts can target are Services, Classes, and Workshops β each independent. Below the first layer, the system lets you choose a category, sub-category, or individual service or item.
Amenities note: Amenities are not a first-class membership benefit or membership discount target. Amenities are configured at the center level. Do not look for an Amenities option in the membership benefit tabs.
Membership-global settings
Two settings apply to the whole membership and do not vary per benefit:
- Credit accrual frequency. Choose Per billing cycle or Once in membership lifetime. This is a single setting for the membership β you cannot mix accrual frequencies across benefits.
- Post-expiry redemption. On the GENERAL tab, under Advanced Properties, set Redemption post expiry or cancellation to Allow, Allow with authorization, or Block. This controls what happens to unused benefits after the membership expires or is terminated. See Benefits after expiry or termination for the full matrix. The membership-master setting always takes priority over the organization default.
Steps
All of the procedures below start from the membership's edit form. Clicking a membership name on Master data > Memberships opens it directly in edit mode.
Configure service credits
Service credits let members receive complimentary or discounted services as part of their membership.
Go to Master data > Memberships and click the name of the membership. The membership opens in edit mode.
Select the service credits tab.
Add a service-credit benefit by selecting the target first.
Configure the benefit details:
Field Description First-layer category Choose Services, Classes, or Workshops. Each is independent. Category / sub-category / service Below the first layer, drill down to the category, sub-category, or individual service or item. Quantity The number of credits awarded per accrual period. Frequency How often this benefit can be redeemed β for example, the gap in weeks between redemptions. Leave this blank if there is no restriction on redemption frequency. Accrual frequency (per billing cycle or once in membership lifetime) is set once for the whole membership β see Membership-global settings. Allowed quantity in the frequency period Maximum number of redemptions within one frequency period. Expiration Days Days after accrual when the credit expires, when benefit expiration is enabled (see Benefit expiration). Leave blank for no limit. Peak Discount Discount on peak-hour appointments when the credit is used. Peak and off-peak hours are defined in the center settings. Off-Peak Discount Discount on off-peak appointments. Post Credit Peak Discount / Post Credit Off-Peak Discount Discounts that apply after all credits are consumed. Guest Pass Quantity Number of guest passes attached. This cannot be more than the benefit quantity. Click Save to apply.
Important: Saving replaces the membership's previously saved benefit services with the list currently on the tab. If the membership has a setup fee, you can copy the updated benefits to the setup fee membership at the same time β see Setup fee benefit inheritance.
Availability: The Guest Pass Quantity field applies only when guest pass is enabled for your organization. For how guest passes are issued and used, see Guest pass and add-on members.
Configure credit amount
Credit amount gives the guest a monetary balance to spend on services, products, or both. The pool is restricted by configuration.
Go to Master data > Memberships and click the name of the membership.
Select the service credits tab, then open the credit amount sub-section.
Add a credit-amount benefit.
Configure the benefit details:
Field Description Credit pool Choose Specify credit amount for services, Specify credit amount for products, or Specify common credit amount to share one balance. The product and common pools require the organization setting that allows membership credit amount to be redeemed on products. Total Credit Amount Monetary credit per accrual period. Accrual frequency Set once for the whole membership β see Membership-global settings. Maximum Credit Redemption Per Invoice Caps how much of the balance can be applied to a single invoice. Restrict redemption to only selected services Optional β limits which services the credit amount can be redeemed against. Click Save.
Availability: Splitting the credit pool to cover products β or using a single common pool β requires the Enable membership credit amount redemption on products organization setting.
Important: Credit amount is a separate benefit from service credits. Service credits award a set quantity of services, classes, or workshops; credit amount awards a monetary balance the guest spends at checkout. A membership can offer one, the other, or both.
Configure service discounts
Service discounts apply a percentage or flat-rate discount on services without using credits.
Go to Master data > Memberships and click the name of the membership.
Select the service discounts tab.
Add a service-discount benefit.
Configure the discount details:
Field Description First-layer category Choose Services, Classes, or Workshops. Category / sub-category / service Drill down. You can set the discount at the Category level (broad), Sub Category level (narrower), or individual service level (precise). Discount Type Percentage or Flat Amount. Discount The percentage or amount. Enter percentage values as percentages. Click Save.
Configure product discounts
Product discounts apply a percentage or flat-rate discount on products. The configuration lets you choose how the discount applies on the invoice line.
Go to Master data > Memberships and click the name of the membership.
Select the PRODUCT DISCOUNTS tab.
Add a product-discount benefit.
Configure the discount details:
Field Description Set discount for Product, Product Category, or Products with same Tag. When you add a tag, make sure the products associated with the tag are not already added directly or through another tag or category. Discount Type Percentage or Flat Amount. Discount The percentage or amount. Quantity The number of units to which the discount applies per use. Applicability Choose Per line item (the discount applies once to the invoice line regardless of quantity) or Per item (the discount applies to each unit on the line). Click Save.
Important: Products receive discounts only. There are no product credits or free product units.
Set the post-expiry redemption policy
- Go to Master data > Memberships and click the name of the membership.
- On the GENERAL tab, open Advanced Properties.
- Set Redemption post expiry or cancellation to one of the following:
- Allow β the guest can redeem accrued benefits after expiry or cancellation.
- Allow with authorization β redemption after expiry requires authorization.
- Block β redemption after expiry is not permitted.
- Use default configuration (Organization) β the membership follows the organization default.
- Click Save.
Any value other than Use default configuration (Organization) takes priority over the organization default.
Worked example: The Glow Monthly recurring membership gives members two facials each month plus a discount on retail. On the service credits tab, the administrator adds a benefit targeting Services > Facials > Signature Facial with Quantity 2 and Expiration Days 60, and sets Post Credit Peak Discount and Post Credit Off-Peak Discount to 20 so members still save after both credits are used. On the PRODUCT DISCOUNTS tab, they add a benefit with Set discount for = Product Category, category Retail Hair, Discount Type = Percentage, Discount 15, Quantity 2, and Applicability = Per item β so a member who buys two bottles gets 15% off each bottle rather than 15% off the line once. Accrual frequency for the membership is Per billing cycle, so the two facial credits are awarded again at each monthly collection.
Track discount redemptions
Zenoti records each discount redemption against the guest's membership, so you can review which member discounts were applied and when. Open the guest profile and select the membership to review its redemption record. Long redemption records load a page at a time, with older entries retrieved as you continue through the list.
Benefit expiration (per-credit)
When benefit expiration tracking is enabled for your organization (Configuration > Memberships > Essentials > Accrual and redemption), individual benefit allocations can have expiration dates. For each service-credit benefit, you set the number of days after accrual when that credit expires, and the system enforces the expiry rule when the credit is used.
Availability: Per-credit expiration requires benefit expiry to be enabled for your organization at Configuration > Memberships > Essentials > Accrual and redemption. When it is not enabled, Zenoti does not track or enforce per-credit expiration dates.
When per-credit expiration is enabled, authorized users can extend the expiry date of individual service credits from the guest's membership detail page using an inline date picker.
Note: Per-credit expiration is distinct from the membership-wide expiration that ends the whole membership. See the next section.
Benefits after expiry or termination
When a membership reaches its expiry date or is terminated, the Redemption post expiry or cancellation setting on the membership controls what happens to remaining benefits. The membership-master setting always takes priority over the organization default. This matrix does not apply to a membership in Upgrade or Downgrade status that has not reached its end date.
Setting values
| Value | Behavior |
|---|---|
| Allow | Guest can redeem accrued benefits after expiry. |
| Allow with authorization | Guest can redeem after expiry, but each redemption requires authorization by a user with the appropriate permission. |
| Block | Guest cannot redeem benefits after expiry. |
An alternative to a blanket Allow or Block is a grace period configured at the center level β redemption is allowed only within X days after expiry, then blocked.
Per-benefit behavior when redemption is Allowed (or within the grace period)
| Benefit | Behavior | Notes |
|---|---|---|
| Service credits | Redeemable β all historically accrued, unused credits. | Partial redemption rules still apply. Frequency limits still enforced. Cross-service redemption via service equality templates still works. |
| Class credits | Redeemable. | Same mechanics as service credits. |
| Credit amount | Redeemable β full remaining balance across the configured pool. | Pool restrictions still apply (services-only / products-only / both). Per-invoice caps still enforced. |
| Visits | Redeemable if any remain. | Visits expire at billing-cycle end and do not roll over β in practice there are often zero visits remaining at expiry. |
| Service discounts | Governed separately. Allowed only when post-expiry redemption is Allow or Allow-with-authorization (or within the grace period) AND the membership still has remaining balance (unused credits or credit amount). | If fully exhausted, discounts stop. |
| Product discounts | Always blocked post-expiry. | Product discounts are never available after expiry regardless of any other setting. |
When post-expiry redemption is Block
| Benefit | Behavior |
|---|---|
| Service credits, class credits, credit amount, visits, service discounts, product discounts | All blocked. Revenue recognition for unredeemed credit balance and service credits may be triggered by the corresponding org setting. |
Other settings that interact with post-expiry redemption
- Per-credit expiry. When per-credit expiry is enabled, each credit accrual has its own expiry date. A credit whose per-credit expiry has passed is not redeemable even when post-expiry redemption is Allow. Such credits show as "Expired QTY" on the Service Balances view.
- Hybrid (dollar-equivalent) model. When the hybrid model is enabled, post-expiry redemption uses the dollar-equivalent value of the credits. The dollar value is the member price at the center where the membership was sold, at the time of sale. The service discounts post-expiry rule is not available when the hybrid model is on.
- Partial redemption. Partial-redemption rules continue to apply post-expiry when redemption is allowed.
- Redemption timing. If the redemption timing is set to "At the time of appointment booking", post-expiry checks run at booking. If set to "When taking payment", the checks run at checkout.
- Auto charge. Auto-charge can still close an invoice fully covered by remaining credits post-expiry, provided redemption timing is set to "At the time of appointment booking".
- Cross-center restrictions. Cross-center redemption restrictions still apply post-expiry.
- Authorization permission. When the setting is Allow with authorization, any user with the post-expiry/cancellation authorization permission can authorize a redemption. Authorization is required per redemption.
- Revenue recognition. When redemption is Block, the org-level revenue-recognition setting can convert unredeemed credit balance and service-credit revenue into recognized revenue.
Note on accrued benefits scope: "Accrued benefits" includes all historical unused benefits across all past periods β not only the current billing period. Any benefit that was accrued and not yet consumed, transferred, or expired (at the individual-credit level) is eligible for post-expiry redemption when the setting allows it.
Setup fee benefit inheritance
When a membership has a setup fee enabled, the setup-fee child record automatically inherits the parent membership's benefits. When you update benefits on the parent, Zenoti removes the membership's previously saved benefit services and, if you choose, copies the updated benefits to the setup-fee child so the two stay in sync.
Important: Annual fee child records do not inherit benefits from the parent. Annual fees are standalone periodic charges with no associated credits or discounts.
Editing benefits on existing memberships
Whether you can edit benefits on an existing membership depends on the versioning model:
- When versioning is disabled: You cannot edit benefits on existing memberships, even with role permissions. To modify benefits, create a new membership.
- When versioning is enabled: Editing benefits creates a new version. Guests who already hold the membership stay on the version they purchased; memberships sold after the change use the latest version.
Tips
- Decide the accrual frequency before you add benefits. It applies to the whole membership, so you cannot award one benefit every billing cycle and another once in the membership lifetime.
- Set discounts at the category level first, then add sub-category or individual-service entries only for the exceptions. Fewer, broader rows are quicker to audit when prices change.
- Use the post-credit discounts on each service-credit benefit so members keep getting value once their credits for the period are consumed.
- Keep guest pass quantity at or below the benefit quantity. A higher value is rejected when you save.
- If the membership has a setup fee, copy the updated benefits to the setup fee record whenever you change the parent, so both records award the same benefits.
Troubleshooting
- The service discounts tab is not visible. Service discounts are not enabled for your organization, or member pricing is enabled at the organization level. The tab is hidden when member pricing is on; use member pricing to set member rates in that case.
- The PRODUCT DISCOUNTS tab is not visible. Product discounts are not enabled for your organization. Ask your organization administrator to enable product discounts.
- Benefit fields cannot be edited on a membership that has already been sold. Membership versioning is disabled. Either enable versioning so that edits create a new version, or create a new membership with the revised benefits.
- Saving the tab returns a message that the guest pass transfer quantity cannot be more than the benefits quantity. Lower the Guest Pass Quantity so it is no higher than the Quantity on the same benefit row, then save again.
- Saving returns a message asking you to enter values in percentages. A discount field contains a value that is not a valid percentage. Re-enter the value in the flagged column and save again.
- A guest cannot redeem credits after the membership expired. Check Redemption post expiry or cancellation on the membership β if it is Block, redemption is not permitted. If it is Allow, confirm the individual credit's own expiry date has not passed and that any center-level grace period is still open.
- A product discount applies only once on a line with several units. Applicability is set to Per line item. Change it to Per item so the discount applies to each unit.
What to configure next
- Required β Set the sale price, setup fee, and tax group for each center where the membership is sold: Pricing and billing.
- Optional β Define how expired balances and service-credit revenue are recognized: Configure membership revenue rules.
- Optional β Configure guest passes and add-on members if the membership extends benefits to other guests: Guest pass and add-on members.
- Optional β Review how staff apply and adjust benefits day to day: Manage membership credits and benefits.