ZenotiHelp

Cancel and reinstate memberships

ZTZenoti Docs Team Updated October 27, 2026 19 min readGuide

Cancelling a membership ends it according to the configured cancellation rules. A cancelled membership reaches the terminated state when its Membership Status and Recurring Status are both Cancelled β€” typically after the effective termination date and any applicable buy-out fee invoice is paid. Reinstating returns a cancelled membership to Active.

This article covers the cancellation request, the two-phase status transition, buy-out fee enforcement, refund modes, service-credit handling, the three membership status dimensions, frozen and pending states, and reinstatement. Membership transfer is covered in a separate article: Transfer a membership.


Audience: Administrators, front desk staff


On this page


Before you begin

Permission: You need the Cancel check box under Memberships in the Marketing Manager section to cancel a membership. Admin path: Configuration > Security > Security roles > [your role] > Marketing Manager > Memberships > Cancel

Permission: You need the Reinstate check box under Memberships in the Marketing Manager section to reinstate a cancelled membership. Admin path: Configuration > Security > Security roles > [your role] > Marketing Manager > Memberships > Reinstate

  • Cancellation rules β€” including lock periods, buy-out fees, and the termination offset β€” are configured at the organization level (under Configuration > Memberships > Membership actions > Cancellation rules) and in the membership master's Advanced Properties section. There are no per-guest-membership settings that enable cancellation.
  • The Termination Offset that separates the cancellation request date from the effective termination date is enabled per membership in Advanced Properties on the membership master. The organization-level default number of offset days is set under Configuration > Memberships > Membership actions > Cancellation rules.
  • The guest's membership must be in a status that allows cancellation. Active is the most common, but cancellation is also possible from other statuses depending on configuration. See Membership status dimensions.
  • Cancellation templates β€” which control the fee and refund formulas applied at cancellation β€” are configured separately under Configuration > Memberships > Membership actions > Cancellation templates. See Configure cancellation templates.

Cancellation request date vs. effective termination date

The cancellation flow uses two distinct dates:

Date What it means
Cancellation request date When staff or the guest submits the cancellation.
Effective termination date When the membership officially ends. Equals the request date plus the configured Termination Offset for the membership.

When a termination offset is enabled, the membership stays partially active between the two dates β€” see What changes during a mid-cycle cancellation. When no offset is configured, the two dates are the same.

Tip: The Termination date field on the cancellation dialog is the effective termination date. The cancellation request date is the timestamp at which the action is submitted.

The cancellation dialog itself uses the Cancel On date field to capture the request date and the Cancel Prorate Fee field to display any prorated cancellation fee computed against the active billing cycle.

Cancel a membership (staff)

Note: When you click Save in the cancellation dialog, the system opens a follow-on confirmation window. If clicking Save appears to do nothing, check your browser's pop-up blocker first β€” the confirmation window may be blocked. Allow pop-ups from Zenoti and try again before escalating.

  1. Open the guest's profile.
  2. In the Active Memberships list, click the membership name to open the membership detail page.
  3. On the membership detail page, click Proceed to Cancel to open the cancellation dialog.
  4. The system checks the configured cancellation rules:
    • If a lock period is in effect and the membership has the No Cancellation restriction applied, cancellation is blocked entirely during that period.
    • If a buy-out fee applies, the system calculates and displays the fee for review.
  5. Enter the cancellation details:
    • Reason β€” Select a cancellation reason from the drop-down list.
    • Comments β€” Enter additional notes.
    • Cancelled by β€” Auto-populated with the staff member performing the cancellation.
    • Termination date β€” The effective termination date. When a termination offset is configured, the dialog shows the request date plus the offset.
  6. Review the buy-out fee, if shown:
    • A buy-out fee may be a flat amount, a percentage of the remaining term, or based on the number of remaining billing cycles.
    • If the current month falls within a rule configured as a no-fee period, cancellation proceeds without a buy-out charge and no fee is displayed.
  7. Click Save to open the follow-on confirmation window, then confirm the cancellation.

Tip: For details on every field displayed in the cancellation summary window, see Cancellation Summary Window β€” Displayed Information.

Important β€” buy-out fee gates completion: When a buy-out fee applies, cancellation is not complete until the buy-out fee invoice is paid. See Buy-out fee and cancellation completion.

After you confirm:

  • The system generates the buy-out fee invoice (when applicable) and processes payment.
  • The system records the cancellation reason, comments, request date, and termination date.
  • The system sends the cancellation notification at the time the action is initiated, not when it takes effect.
  • The cancellation source (admin, Webstore, or API) is recorded in the audit trail. The source is not displayed as a field on the cancellation form.

Worked example β€” mid-cycle cancellation with termination offset

A guest requests cancellation on 15 June. The membership has a Termination Offset of 15 days configured. The effective termination date is therefore 30 June. The cancellation dialog shows:

  • Cancel On: 15 June (the request date)
  • Termination date: 30 June (the effective termination date)
  • Buy-out fee: $0 (no buy-out rule applies in this example)

The guest's Recurring Status changes to Cancelled on 15 June; the Membership Status remains Active until 30 June, after which both dimensions are Cancelled and the membership is in the terminated state.

The Webstore / guest-portal flow is the recommended guest-facing path. Guests cancel their own membership without contacting the center.

  1. The guest logs in to the guest portal or Webstore.
  2. The guest opens their membership details.
  3. The guest selects Cancel Membership.
  4. The system presents the cancellation terms β€” buy-out fee (if any) and the effective termination date.
  5. The guest confirms.

The system processes the cancellation using the same rules as a staff-initiated cancellation, including the same buy-out fee gate.

Note: Self-service cancellation is available only when the new membership workflow is enabled for the organization. Without the new workflow, guests can submit a cancellation request that staff process from the admin flow above.

Tip: Direct guests to the Webstore for self-service. The admin flow exists for staff-assisted situations; documentation for the staff path is cross-linked from the Webstore guidance.

What changes during a mid-cycle cancellation

When a cancellation is submitted before the effective termination date β€” for example, the guest cancels in the middle of a billing cycle and a termination offset extends the end date to the cycle's end β€” the membership status transitions in two phases.

Phase Membership Status Recurring Status Effect
At request submission Active Cancelled Recurring collection stops. The guest may continue to redeem benefits per the post-expiry redemption configuration on the membership.
At the effective termination date Cancelled Cancelled The membership is in the terminated state. Benefit redemption follows the post-expiry rules.

Important: "Terminated" describes the combined end state when both Membership Status and Recurring Status are Cancelled. It is not a separate status value.

Buy-out fee and cancellation completion

When a membership's cancellation rules specify a buy-out fee, the system generates a buy-out fee invoice at the time of cancellation.

  • Cancellation is not complete until the buy-out fee invoice is paid (if applicable). If the buy-out invoice remains in a pending state, the cancellation remains incomplete until the payment clears.
  • If the guest's payment method fails, the system retries the buy-out fee collection per your retry configuration. These retry attempts appear as post-cancellation charges in the invoice history β€” see Troubleshooting.

Cancellation notification templates

When the cancellation templates feature is enabled at the organization level, you can apply predefined cancellation notification templates. The Cancellation Templates page (at Configuration > Memberships > Membership actions > Cancellation templates, documented in Configure cancellation templates) is a distinct surface from Cancellation Rules β€” that page configures the fee and refund formulas applied at cancellation, as well as template-driven cancellation behavior including Add Rule, Apply rule to, Apply Tax on Fees, Cancellation fees, Prorated Refund, and Assign at Membership Level. The notification template can include:

  • The membership name and cancellation request date.
  • The effective termination date and any grace period details.
  • Outstanding balance or buy-out fee information.
  • Instructions for redeeming remaining benefits during the grace period.
  • Contact information for questions about the cancellation.

Templates are managed in the organization's notification settings under Configuration > Notifications > Templates for email and text > Memberships and Packages. The notification is sent when the cancellation is initiated, not when it takes effect.

Service credits after cancellation

When a membership is cancelled, remaining Service Credits and Credit Amount balance are handled according to the post-expiry redemption setting on the membership (see Benefits configuration):

  • Allow / Allow with authorization β€” The guest can continue to redeem unused credits and credit amount after the termination date, subject to the per-benefit matrix.
  • Block β€” Unused Service Credits and Credit Amount expire on the termination date. This is the only scenario in which cancellation triggers credit expiry. If transfer or credit-to-gift-card conversion is configured for the membership, those happen before the expiry.

Optional handling alternatives that may apply, depending on configuration:

  • Credit transfer. Unused Service Credits can be transferred to another guest when the organization allows benefit transfers (configured per-membership via Transfer of Membership Benefits).
  • Credit-to-gift-card conversion. When the conversion feature is enabled and the cancelled membership has a remaining credit balance, the system converts the balance to a single gift card issued to the guest.

Note β€” service discounts post-cancellation. When the org setting "Allow guest to use service discounts post cancellation" is enabled and the grace period end date is in the future, service discounts from the cancelled membership still apply at checkout β€” provided the membership has remaining balance to support them.

Refund on cancellation: auto vs manual

The system supports two refund modes on cancellation. In both modes, only paid invoices are refundable β€” outstanding (unpaid) invoices are not eligible.

Auto-refund

Auto-refund is enabled when the cancellation includes the auto-refund flag and the cancellation falls inside the configured refund window (the number of days from sale date during which auto-refund is allowed).

  1. The system identifies eligible paid invoices.
  2. The system calculates eligible refund amounts based on the membership's configured refund rules and the unused portion of the billing cycle.
  3. The system creates refund records and reverses the corresponding payments.

Manual refund

In manual mode, staff identify the invoices to refund and calculate the refund amount. The system does not auto-calculate the unused portion in manual mode.

  1. From the membership, open the invoice history.
  2. Identify the paid invoices eligible under your refund policy.
  3. Calculate the refund amount for each β€” the system does not auto-calculate the unused portion in manual mode.
  4. Process the refund for each eligible invoice. The system creates a refund record and reverses the payment.

Refund dialog fields

The refund dialog uses the Payment Type picker to select how the refund is issued. Additional fields on the dialog include the Refund Amount, an option to Close membership along with the refund, and the Refund Invoice action.

Important: Refunds are only valid against paid invoices. The system will not refund outstanding invoices. If an invoice has not been collected, cancel or waive it through the appropriate collection actions instead of attempting a refund.

Reselling with updated changes: Cancelling and refunding a membership does not modify its underlying configuration β€” pricing, credits, and benefits are fixed at creation. To sell the guest an updated version (different price, credits, or benefits), clone the membership first and edit the clone; see Clone a membership.

Membership status dimensions

A membership has three independent status dimensions. Each is tracked separately. Help articles, dashboards, and reports must scope every status mention to one of these dimensions.

Membership Status

Drives redemption β€” whether the guest can use benefits.

Status Description
Active The membership is current; the guest receives benefits.
Inactive Membership has been deactivated by administrative action.
Frozen Membership is frozen. Benefit availability during the freeze depends on the freeze type configured for the membership. See Freeze and unfreeze a membership.
Cancelled The membership has been cancelled and has reached its effective termination date.
Expired The membership reached the end of its billing cycles or fixed end date.
Closed The membership was closed by administrative action. This is a distinct terminal status β€” see Closed memberships and the reinstate-then-act sequence.
Not Started Pre-activation state β€” the membership is sold but not yet activated. For example, when the membership is set to start validity at first redemption and the guest has not redeemed a benefit yet. This is a "ready for activation" state, not a "deactivated" state.
Suspended The system automatically suspended the membership after repeated payment failures (dunning). Benefit redemption may still be allowed depending on the organization's Allow redemption from suspended memberships setting at Configuration > Memberships > Essentials > Accrual and redemption.
Refunded The membership was refunded.
Deleted The membership record has been deleted.
Failed A recurring payment failed and the membership has been flagged.
Upgrade The membership was replaced when the guest upgraded to a different membership. See Upgrade or downgrade a membership.
Downgrade The membership was replaced when the guest downgraded to a different membership.
Pending The membership is awaiting activation. See Mark a membership as pending.
Transferred The membership was transferred to another center. Transfer is center-to-center, not guest-to-guest. See Transfer a membership.
Removed The membership has been removed from the guest's record.
Default The initial placeholder value, carried before a status is assigned.

Recurring Status

Drives collection β€” whether the system bills the guest on schedule.

Status Description
Active Recurring collection is in effect.
Inactive Recurring collection has been deactivated administratively.
Frozen Recurring collection is stopped as part of a freeze.
Cancelled Recurring collection has been cancelled. During a mid-cycle cancellation, the Recurring Status transitions here first while Membership Status remains Active.
Expired The recurring schedule reached its end.
Closed The recurring schedule has been closed.
Not Started The recurring schedule has not started yet.
Suspended Recurring collection suspended by dunning after repeated failures.
Suspended Pending Tries Suspended with payment retry attempts still queued.
Do Nothing Dunning completed without changing the collection status, because the configured dunning action was to skip the status change.
Deleted The recurring schedule record has been deleted.
Failed The most recent recurring collection attempt failed.
Upgrade The recurring schedule ended because the guest upgraded to a different membership.
Downgrade The recurring schedule ended because the guest downgraded to a different membership.
Pending Direct Debit The next collection is awaiting direct-debit clearance.
Transferred The recurring schedule moved with a center-to-center transfer.
Default The initial placeholder value, carried before a status is assigned.

Invoice Status

A status carried by each recurring invoice generated for the membership. Each invoice has its own status.

Status Description
Pending Invoice scheduled but not yet collected.
Collected Invoice paid in full. Only Collected invoices are refundable on cancellation.
Waived Invoice waived.
Stopped Collection stopped administratively.
Cancelled Invoice cancelled.
Failed A collection attempt on this invoice failed.
Deleted The invoice record has been deleted.
Refunded Invoice refunded after collection.
Pending Direct Debit Awaiting direct-debit clearance.
Batched Queued in a collection batch.
Default The initial placeholder value, carried before a status is assigned.

Note: "Failed" exists in all three dimensions. When you describe Failed, always scope it β€” Membership Status Failed means the membership is flagged because of a payment failure; Recurring Status Failed means the recurring schedule's most recent attempt failed; Invoice Status Failed means a specific invoice's collection failed.

Set a membership to Frozen

An administrative action can set a membership's Membership Status to Frozen without running the full freeze workflow. This is distinct from the freeze procedure, which also applies freeze rules, freeze reasons, freeze fees, and an Unfreeze on date.

Use this action when the membership must stop providing benefits without running the full freeze procedure. Because the resulting status is Frozen, the membership appears alongside frozen memberships in listings and reports.

Important: Setting a membership to Frozen is not cancellation. A frozen membership is not cancelled and does not reach the terminated state. To end a membership permanently, use the cancellation procedure in Cancel a membership (staff).

Tip: For the full freeze workflow β€” including freeze reasons, the rolling annual freeze limit, freeze fees, and the Unfreeze on date β€” see Freeze and unfreeze a membership.

Mark a membership as pending

A membership awaiting activation can be marked as Pending on the Membership Status dimension. Use this for memberships that have been sold or set up but should not yet provide benefits or begin recurring collection.

A membership in Pending status:

  • Does not provide benefits to the guest until it is activated.
  • Is distinct from Not Started, which is the pre-activation state for a membership whose validity begins at first redemption.

Note: Pending also appears as an Invoice Status value, where it means a recurring invoice is scheduled but not yet collected. Always scope the term to the dimension you mean. See Membership status dimensions.

Reinstate a cancelled membership

  1. Open the guest's profile.

  2. Locate the cancelled membership in the guest's membership history (cancelled memberships do not appear in the Active Memberships list).

  3. Click the membership name to open the membership detail page.

  4. Click Reinstate to open the Reinstate Membership dialog.

  5. Review and adjust the three reinstate dates:

    Field Default
    New expiration date The original membership expiration date.
    Next scheduled collection date The next billing date from the original schedule.
    Annual-fee payment date The original annual-fee date, when an annual fee is configured.
  6. Click Reinstate to confirm.

After reinstatement:

  • The Membership Status returns to Active and the Recurring Status returns to Active.
  • Recurring billing resumes from the next scheduled collection date.
  • Benefit accrual restarts.

Note: Reinstatement does not automatically refund any buy-out fee that was charged during the original cancellation.

Worked example β€” reinstatement with adjusted dates

A guest's membership was cancelled on 1 May with an expiration date of 31 May. The guest requests reinstatement on 10 June. The Reinstate Membership dialog defaults to:

  • New expiration date: 31 May (the original expiration)
  • Next scheduled collection date: 1 June (the next billing date from the original schedule)
  • Annual-fee payment date: 1 January (the original annual-fee date, if applicable)

The staff member updates the New expiration date to 30 June and the Next scheduled collection date to 1 July to give the guest a full month of active membership from the reinstatement date. The Annual-fee payment date is left at its default.

Reinstate add-on members

When you reinstate a primary membership, you can also reinstate linked add-on members.

  1. After reinstating the primary membership, the system displays linked add-on members who were also cancelled.
  2. Select the add-on members to reinstate.
  3. Use the validate-only mode to preview the outcome β€” it checks whether the reinstatement is valid (payment method on file, no conflicting active memberships) without executing.
  4. Confirm the reinstatement for the selected add-on members.

Note: Add-on members and family memberships are distinct concepts. The reinstate-add-on-members flow described here applies to add-on members linked to a primary membership.

Closed memberships and the reinstate-then-act sequence

Closed is a distinct terminal Membership Status, most often reached as a side effect of an earlier refund or explicit administrative closure. It is not the same as Cancelled or Expired.

The matrix below shows which financial actions are available in each end-of-life status. The settings that permit refunds and post-cancellation redemption for Cancelled or Expired memberships do not extend to Closed memberships β€” on a Closed membership, these options are absent with no error message.

Financial action Active Cancelled Expired Closed
Refund a paid invoice Available Available Available Not available β€” the option is absent with no error
Auto-refund as part of cancellation Available within the configured refund window Not applicable Not applicable Not available
Redeem remaining benefits after the end date Not applicable β€” the membership is live Governed by the post-expiry redemption setting Governed by the post-expiry redemption setting Not available β€” the post-expiry redemption setting does not extend to Closed

When you need to perform a financial action on a Closed membership, use the reinstate-then-act-then-close-again sequence:

  1. Reinstate the membership (see Reinstate a cancelled membership).
  2. Perform the required action β€” for example, process the refund or adjust the invoice.
  3. Close the membership again using the administrative close action.

Important: Only an open recurring or collection invoice on the existing membership blocks an upgrade or change. Clearing that invoice unblocks the action. A duplicate sale invoice β€” a second sale of a membership the guest already holds β€” does not block the first membership's upgrade or downgrade. Do not close a duplicate sale invoice at the desk to clear a perceived block, because doing so sells the guest a membership they did not ask for.

Memberships created by data migration

Memberships imported via data migration may lack the native Proceed to Cancel action. This occurs because migrated memberships were not created through the standard membership sale flow and may be missing internal state that the cancellation action requires.

Additionally, automatic cancellation after failed payments (dunning) applies only to memberships created natively in Zenoti. A member with months of failed payments may remain Active if their membership was migrated β€” the dunning processor does not act on migrated records in the same way.

Supported workaround: Edit the membership to set an expiration date. Setting an expiration date causes the membership to expire naturally on that date without requiring the cancel action.

If the workaround does not resolve the issue β€” for example, if the membership cannot be edited or the expiration date does not take effect β€” raise the case with Zenoti Support for investigation.

Troubleshooting

Clicking Save in the cancellation dialog does nothing

The cancellation dialog opens a follow-on confirmation window when you click Save. If nothing appears to happen, your browser's pop-up blocker is the most likely cause. Allow pop-ups from Zenoti and try again. If the issue persists after allowing pop-ups, clear the browser cache and retry before escalating to Zenoti Support.

Charges appearing after cancellation

If a guest reports charges appearing after their membership was cancelled, check the following:

  • Pending invoices at the time of cancellation. Invoices generated before the cancellation date but not yet collected may still process after cancellation. Check the invoice history for invoices with a creation date before the cancellation date but a collection date after.
  • Buy-out fee retries. The buy-out fee invoice is generated at the time of cancellation. If the guest's payment method fails, the system retries the buy-out fee collection per your retry configuration. These retry attempts appear as post-cancellation charges. Remember that cancellation is not complete until the buy-out fee is paid.
  • Annual fee timing. If the membership includes an annual fee and the anniversary date falls near the cancellation date, the annual fee invoice may have been generated before the cancellation was processed.

To resolve post-cancellation charges:

  1. Navigate to the guest's membership and review the invoice history.
  2. Identify any paid invoices with a collection date after the cancellation date.
  3. For charges that were not legitimate (for example, a billing-cycle invoice that should not have been generated), process a refund against the paid invoice.
  4. For correctly-generated charges (buy-out fee or annual fee), explain the timing to the guest.

Membership cannot be cancelled (migrated membership)

If the Proceed to Cancel action is absent on a membership, the membership may have been created by data migration. See Memberships created by data migration for the supported workaround and when to contact Zenoti Support.

Tips

  • Understand the difference between freeze and cancel. Freezing temporarily stops the membership with the intention of resuming it; cancellation permanently ends it (with reinstatement possible). Use Freeze and unfreeze a membership when the guest plans to return.
  • Self-service cancellations follow the same buy-out fee rules as staff-initiated cancellations. Guests see the fee amount before confirming.
  • When a guest with a Suspended membership asks about benefit redemption, check the Allow redemption from suspended memberships setting at Configuration > Memberships > Essentials > Accrual and redemption. When this setting is on, the guest can still use accrued benefits even though recurring collection is suspended.

Video: Cancel Membership (1:33) β€” Walk-through of cancelling a membership.

Video: Refund Payment Made for Membership (1:47) β€” How to refund a membership payment.


Was this article helpful?
Your feedback helps us improve our documentation.