ZenotiHelp

Configure membership benefits

ZTZenoti Docs Team Updated August 25, 2026 11 min readHow-to

Membership benefits define the value guests receive from their membership. Benefits can include complimentary services, service discounts, product discounts, free credits, or a combination. Visits and guest passes are also available as benefit types but are configured separately from the main benefit type setting. You configure benefits within the membership's General tab, and they apply to all guests enrolled in that membership.

Note: For conceptual background on membership types and benefit structures, see Memberships overview.

Before you begin

Permission: Create or Edit (under Memberships) β€” Allows configuring membership benefits such as credits and discounts.

Note: Permissions for this feature are controlled by your organization's security settings. Contact your administrator if you cannot access this feature.

  • You need the Memberships > Create permission to configure benefits on a new membership, or the Memberships > Edit permission to modify benefits on an existing membership.
  • Benefits are typically configured when creating a membership. You can also add or modify benefits on an existing membership by editing it.
  • Decide on the benefit type before you begin. Each membership supports one primary benefit type, and changing it later may affect enrolled guests.

Important: Benefits editing is blocked when the organization setting that enables membership versioning is disabled. If you cannot edit benefits on an existing membership, you must create a new membership instead.


On this page


Steps

Benefits are configured within the membership's General tab, under the Benefits accordion.

  1. Open the membership.
  2. Navigate to the tab for the benefit type you want to configure β€” Service Credits, Service Discounts, or Product Discounts.
  3. Configure the specific benefit settings (see the sections below).

Understand the four Benefits tabs

The membership wizard exposes dedicated top-level tabs for each benefit type:

Tab Description
Service Credits Quantity-based free or discounted services per accrual period.
Credit Amount Monetary credit balance the guest can spend on services, products, or both (pool-restricted).
Service Discounts Percentage or flat-rate discount on services (at category, sub-category, or individual service level).
Product Discounts Percentage or flat-rate discount on products, with per-line or per-quantity application.

Note: In addition to the four tabs, memberships also support visits and guest passes as benefit constructs. These are configured separately β€” see Configure guest pass and add-on members for details.

Important: Products receive discounts only as membership benefits. There are no product credits. Free credits apply to services, classes, and workshops only. Amenities are not a membership-benefit category β€” they are configured at the center level.

To configure benefits:

  1. Open the membership and navigate to the relevant top-level tab (Service Credits, Service Discounts, or Product Discounts).
  2. Configure the benefit settings (see the sections below).
  3. Click Save.

Configure Service Credits

Service Credits give members a set number of complimentary or discounted services during each accrual period. This is ideal for memberships that include bundled services such as monthly facials or massages.

  1. Open the membership and navigate to the Service Credits tab.

  2. Click Add to create a new Service Credits benefit.

  3. Configure the following fields:

    Field Description
    First-layer category Choose Services, Classes, or Workshops. Each is independent.
    Service / Category Below the first layer, drill down to the category, sub-category, or individual service.
    Quantity Enter the number of complimentary services per accrual period.
    Frequency Read-only at the benefit level β€” set by the membership-global frequency (per billing cycle or once in lifetime).
    Expiration days Enter the days after accrual that unused credits expire (when the org-level benefit expiry setting is on).
    Discount (%) The discount applied. Enter 100 for a fully complimentary service.
  4. Repeat for additional Service Credits benefits.

  5. Click Save.

Configure Credit Amount

Credit Amount gives members a monetary credit balance. The pool restriction determines whether the balance can be spent on services, products, or both.

  1. Open the membership and go to the General tab > Benefits accordion > Credit Amount tab.

  2. Click Add to create a new Credit Amount benefit.

  3. Configure the following fields:

    Field Description
    Pool Choose Services only, Products only, or Both. The Products-only and Both pools require the org setting that allows credit amount on products.
    Amount Enter the monetary value credited per accrual period.
    Frequency Read-only at the benefit level β€” set by the membership-global frequency.
    Max credit redemption per invoice Caps how much of the balance can be applied to a single invoice.
    Restrict to selected services Optionally limit which services the credit amount can be redeemed against.
  4. Click Save.

Note: Credit Amount is its own tab β€” distinct from Service Credits. Earlier UI iterations conflated the two; the current product separates them.

Configure service discounts

Service discount benefits give members a percentage or flat amount discount on services. You can apply discounts at the individual service level or at the service category level.

  1. Open the membership and go to the General tab > Benefits accordion > Service Discounts tab.

  2. Click Add Service Discount.

  3. Configure the following fields:

    Field Description
    Scope Select Per Service to set discounts on individual services, or Per Category to set discounts on all services within a category.
    Service/Category Select the service or category the discount applies to.
    Discount type Select Percentage or Flat amount.
    Discount value Enter the discount value. For percentage, enter the percentage (for example, 20 for a 20% discount). For flat amount, enter the currency value to deduct from the service price.
  4. Repeat for additional service discounts.

  5. Click Save.

Configure product discounts

Product discounts give members a percentage or flat amount discount on products. You can configure product discounts at multiple levels for flexible targeting.

Important: Products support discounts only. There is no concept of product benefits or product credits. Do not confuse product discounts with service benefits or free credits, which are separate benefit types.

  1. Open the membership and go to the General tab > Benefits accordion > Product Discounts tab.

  2. Click Add Product Discount.

  3. Configure the following fields:

    Field Description
    Level Select the level at which the discount applies: Product (a specific product), Product Category (all products in a category), or Product Tag (all products with a specific tag).
    Product / Category / Tag Select the specific product, product category, or product tag the discount applies to, based on the level selected above.
    Discount type Select Percentage or Flat amount.
    Discount value Enter the discount value. For percentage, enter the percentage (for example, 15 for a 15% discount). For flat amount, enter the currency value to deduct from the product price.
    Application Select whether the discount applies to One item (a single unit of the product) or One line level (the entire line total for that product on the invoice).
  4. Repeat for additional product discounts.

  5. Click Save.

Configure benefit expiration

By default, membership benefits do not expire until the membership itself ends. You can enable benefit-level expiration to require guests to use their benefits within a specified timeframe.

  1. At the organization level, navigate to Configuration.
  2. Search for and enable the setting that enables membership benefit expiry.
  3. When enabled, the Expiration days field on each benefit becomes active. The system automatically expires unused benefits after the configured number of days.

Note: The organization setting that enables membership benefit expiry must be turned on before per-benefit expiration days take effect. Without this setting, benefits remain available until the membership ends.

Configure center-specific benefits

If your organization has multiple centers, you can configure benefit overrides for specific centers. Center-specific configurations allow you to tailor benefits (such as different credit amounts or discount percentages) to individual locations while keeping the base membership configuration consistent.

  1. Open the membership and go to the Center tab.
  2. Select the center you want to configure.
  3. Override the benefit settings as needed for that center. Center-level settings take precedence over the base configuration defined on the General tab.
  4. Click Save.

Note: Center-specific benefit configurations are managed on the Center tab, not the General tab. Use the General tab for the default benefit setup that applies across all centers.

Understand frequency windows and billing cycles

A benefit's frequency window and a membership's billing cycle are two independent schedules. Confusing them is the most common reason a redemption appears to fail even though the guest has an active membership and has not yet been billed for the current period.

How frequency windows work

When a benefit is configured with a frequency (for example, two service credits per month), the system divides the membership's validity into consecutive windows of that length. Each window starts from the membership's start date, not from the guest's most recent billing date. The system counts how many times the benefit has been redeemed within the window that contains the appointment date β€” regardless of whether the guest has been billed yet in that window.

How billing cycles work

A billing cycle is the recurring payment schedule β€” for example, a collection that runs on the 15th of each month. The billing cycle determines when the guest is charged, not when benefits reset.

Why the two can differ

Consider a membership sold on 10 January with a monthly benefit of two service credits and a billing cycle that runs on the 1st of each month.

  • The first frequency window runs from 10 January to 9 February.
  • The first billing cycle runs from 1 February to 28 February.

An appointment booked on 5 February falls in the first frequency window (10 Jan – 9 Feb). If the guest has already used two credits in that window β€” even though the February billing cycle has not yet run β€” the system refuses the redemption and displays:

Credits already consumed in the allotted frequency, as per the membership configuration.

This message means the benefit's frequency window is exhausted for the period that contains the appointment date. It is not an error and does not indicate a billing or payment problem.

How to determine which window an appointment falls in

  1. Note the membership's start date.
  2. Count forward in increments of the benefit frequency (days, weeks, or months) from the start date.
  3. Identify which increment contains the appointment date β€” that is the active frequency window.
  4. On the guest's membership details page, review the redemptions recorded against that membership to see how many credits have been used in the current window.

Worked example: A guest's membership started on 3 March. The benefit allows two massage credits per month. The guest books a massage on 28 March and another on 2 April.

  • Window 1: 3 March – 2 April. The 28 March appointment uses credit 1 of 2 in window 1.
  • The 2 April appointment also falls in window 1 (which ends on 2 April). It uses credit 2 of 2 in window 1.
  • If the guest tries to book a third massage on 2 April, the system displays Credits already consumed in the allotted frequency, as per the membership configuration. β€” because window 1 is exhausted.
  • Window 2 begins on 3 April. A booking on 3 April or later draws from the fresh window-2 allotment.

The guest's billing cycle may run on the 1st of each month. The April billing cycle (1 April) does not reset the frequency window, which resets on 3 April.

Tips

  • Configure the most commonly redeemed benefit type first. Guests and front-desk staff see Service Credits most frequently, so completing that tab before moving to discounts reduces configuration errors.
  • Use the Restrict to selected services option on Credit Amount benefits to prevent guests from spending monetary credits on services outside the intended scope of the membership.
  • When setting up product discounts, choose One line level applicability if the discount should apply to the total quantity of a product on an invoice, rather than to each individual unit. This is useful for bulk-purchase scenarios.
  • Before publishing a membership, verify that the benefit frequency aligns with the intended billing cycle. Because frequency windows and billing cycles are independent, a mismatch can cause guests to exhaust their credits before the next billing date.
  • If guests report that their credits are not available despite having an active membership, check the frequency window first (see Troubleshooting) before investigating billing or payment status.

Troubleshooting

The system displays "Credits already consumed in the allotted frequency, as per the membership configuration." but the guest says they have not used their credits this month.

This message is configuration-driven, not a fault. It means the benefit's frequency window β€” not the billing cycle β€” is exhausted for the period containing the appointment date. The frequency window starts from the membership's start date and advances in fixed increments. It is independent of whether the guest has been billed in the current cycle or has visited recently. To resolve:

  1. Identify the membership's start date.
  2. Count forward in benefit-frequency increments to find the window that contains the appointment date.
  3. On the guest's membership details page, review redemptions recorded in that window.
  4. If the window is genuinely exhausted, advise the guest that credits will reset at the start of the next window. If redemptions appear incorrect, escalate to your administrator to review the redemption history.

A benefit tab (Service Credits, Credit Amount, Service Discounts, or Product Discounts) is not visible on the membership form.

Each tab is exposed based on the benefit mode selected for the membership and on organization-level settings. Check:

  • The benefit mode selector in the General tab's Benefits section β€” it controls which tabs are shown.
  • Whether the relevant organization settings (for example, the setting that allows credit amount on products) are enabled. Contact your administrator if a tab you expect to see is missing.

Product discounts are not applying at checkout even though they are configured on the membership.

Verify the following:

  • The product being purchased matches the level configured on the discount (specific product, category, or tag).
  • The membership is in Active status. Discounts do not apply when the membership is Frozen, Suspended, Cancelled, or Expired.
  • The discount applicability (One item vs One line level) matches the expected behavior. If the discount appears to apply only once when the guest purchases multiple units, the applicability may be set to One line level rather than One item.
Was this article helpful?
Your feedback helps us improve our documentation.