ZenotiHelp

Admin Settings panel

ZTZenoti Docs Team Updated September 12, 2026 6 min readHow-to

The Admin Settings panel in the new kiosk gives an authenticated employee access to device-level configuration β€” including center selection, cash register assignment, mirror mode, and log out β€” without leaving the kiosk application. All changes made here affect only the kiosk device on which they are applied.

Note: For conceptual background on the new kiosk and its setup requirements, see New kiosk overview.

Audience: Center administrators or managers who configure and maintain the new guest kiosk device.


On this page


Before you begin

  • The new kiosk must be enabled at both the organization and center level. See Enable New Kiosk β€” Organization and Center Gating for both prerequisites.
  • An employee must be logged in to the kiosk device. The new kiosk requires employee authentication before any guest session begins.
  • You must know your organization account name. This is the same account name used when logging in to Zenoti.
  • To change the assigned center, be prepared for the kiosk application to restart. Active guest sessions will be interrupted.

Permission: Admin Settings requires standard Edit permission on the Organizations security object.


Steps

Open the Admin Settings panel

  1. From any screen on the new kiosk, navigate to the Admin Settings entry point on the device. The panel is accessible to authenticated employees only.
  2. When prompted, enter your organization account name in the Admin mode verification dialog.
    • If the account name you enter does not match the organization account on file, the kiosk displays "Account name doesn't match" and returns you to the entry prompt.
  3. Upon successful verification, the Admin Settings panel opens with the subtitle "These changes affect only the Kiosk application".

Important: The account name verification step prevents guests from accessing device configuration. Do not share the organization account name with guests.


Select or change the center

Use this step to assign or reassign which center this kiosk device serves.

Important: Changing the center requires the kiosk application to restart. Any in-progress guest session on the device will be lost. Confirm that no guest is actively using the kiosk before proceeding.

  1. In Admin Settings, select Center selection.
    • The screen displays the subtitle "Select the center for this Kiosk" and lists the centers available to your organization.
  2. Select the center you want this device to serve.
  3. Review the warning: "Changing the center requires the app to restart."
  4. Choose one of the following:
    • Save and restart app β€” Saves your center selection and immediately restarts the kiosk application.
    • Reset changes β€” Discards the selection and returns to Admin Settings without restarting.

After the application restarts, the kiosk connects to the selected center and returns to the employee login screen.

Worked example: A manager is setting up a second kiosk tablet for a new treatment room. They open Admin Settings, enter the organization account name, select Center selection, choose Downtown Spa, and tap Save and restart app. The kiosk restarts and is now bound to the Downtown Spa center.


Assign a cash register

Assigning a cash register links this kiosk device to a specific register for payment processing.

  1. In Admin Settings, select the cash register option. The screen heading displays "Cash register for {0}" where {0} is replaced by the device or center name, with the subtitle "Select a cash register and refresh active sessions".
  2. Select the cash register you want to assign to this device from the list.
  3. Select Save to apply the assignment.

Note: If no cash registers have been configured for the center, the kiosk displays "No cash registers available". For POS and register configuration, see your administrator or the point-of-sale setup documentation.


Enable or disable mirror mode

Mirror mode allows a staff member to control this kiosk screen remotely from the Zenoti Mobile App (ZMA).

  1. In Admin Settings, locate the Mirror mode toggle. The subtitle reads "Switch this on to mirror this device from the ZMA app".
  2. Toggle Mirror mode on or off as required.
  3. Select Save to apply the change.

When mirror mode is on, a ZMA user can project and interact with the kiosk screen from their mobile device. When mirror mode is off, the kiosk operates independently.


Log out of the kiosk

Logging out returns the device to the employee login screen and ends the current employee session.

Important: After logging out, a new employee authentication is required before any guest can use the kiosk. Do not log out during an active guest session.

  1. In Admin Settings, select Log out and exit.
  2. A confirmation dialog appears with the heading "Confirm log out?". The dialog warns that re-authentication will be required to resume kiosk operation.
  3. Confirm the log out to exit the current employee session. The kiosk returns to the Employee Login screen.

Tips

  • Verify the center before opening the kiosk to guests. After initial device setup or any center change, confirm the correct center is displayed by opening Admin Settings and reviewing the current center selection before enabling guest access.
  • Use mirror mode for supervised guest sessions. Enable mirror mode when training new staff or assisting a guest who needs help navigating the kiosk. A ZMA user can guide the guest from the mirror view without approaching the device.
  • Schedule center changes during off-hours. Because changing the center restarts the application, plan this operation before the center opens or after the last guest session of the day to avoid disrupting active check-ins.
  • Keep the organization account name secure. The account name is the only credential protecting access to Admin Settings. Store it in a location accessible to authorized managers but not visible to guests at the kiosk.
  • Re-assign the cash register after a center change. Center changes reset device-level configuration. After saving a new center and restarting, return to Admin Settings to confirm the correct cash register is still assigned.

Troubleshooting

Problem Likely cause Resolution
"Account name doesn't match" appears when entering the organization account name The account name was entered incorrectly, or the wrong account name was used Re-enter the exact organization account name used to log in to Zenoti. Account names are case-sensitive. Contact your administrator if you are unsure of the correct name.
The Center selection screen shows no centers The employee account does not have access to any centers, or the organization's kiosk is not enabled Confirm that the new kiosk is enabled at the organization level and that the logged-in employee has access to at least one center. See Enable New Kiosk β€” Organization and Center Gating.
"No cash registers available" appears in the cash register assignment screen No cash registers have been configured for the selected center Ask your administrator to set up a cash register for the center in the point-of-sale configuration. For POS payment details, see front-desk-point-of-sale.
Mirror mode toggle is on, but the kiosk screen does not appear in the ZMA app The ZMA user has not navigated to the correct screen, or Bluetooth or network connectivity is interrupted Confirm the ZMA user is viewing Settings > Customer Kiosk in the Zenoti Mobile App. Check that both the kiosk device and the ZMA device are on the same network. Toggle mirror mode off and back on to re-establish the connection.
After selecting Log out and exit, the kiosk does not return to the employee login screen A transient application error occurred during log out Force-close the kiosk application on the device and relaunch it. The device will return to the Employee Login screen.

Was this article helpful?
Your feedback helps us improve our documentation.