ZenotiHelp

Mirror Mode β€” Always-On and Ad URL Settings

ZTZenoti Docs Team Updated November 11, 2026 4 min readHow-to

The Mirror mode settings group in the guest kiosk admin settings screen lets you control what appears on a mirror display between point-of-sale checkout sessions. You can keep mirror mode on until the mirror screen is closed and optionally show a branded advertisement page while no checkout is in progress.

Audience: Center administrators who manage guest kiosk hardware and display configuration.


On this page


Before you begin

  • These settings apply to the new Kiosk app.
  • Mirror mode applies to the mirror display connected to the kiosk device at your center. Confirm the mirror hardware is connected and functioning before configuring these settings.
  • The Ad URL is set per center and is shared with the Zenoti Mobile App mirror screen. Changes to this field affect the mirror screens at the center.
  • Keep mirror mode always on is a per-device toggle on the kiosk device.

Note: For conceptual background on the guest kiosk and its display surfaces, see Front Desk Kiosk Overview.

Steps

Enable Mirror mode

  1. Open the Admin settings screen on the kiosk device.
  2. Locate the Mirror mode settings group.
  3. Turn on the Mirror mode toggle.

Once Mirror mode is on, the Keep mirror mode always on sub-toggle becomes visible. With Keep mirror mode always on off, mirror mode behaves as before and the kiosk stays available.


Enable Keep mirror mode always on

Important: While Keep mirror mode always on is on, the kiosk is unavailable. The device is used only as a mirror display.

  1. Turn on the Keep mirror mode always on sub-toggle.
  2. Confirm the Turn off Kiosk prompt.

Once Keep mirror mode always on is on and confirmed, the Ad URL field becomes visible.

What this controls:

When Keep mirror mode always on is on, the device shows the mirror screen, and it stays on until the mirror screen is closed. Restarting the kiosk turns the setting off, and the kiosk opens normally. The mirror screen has an admin shield so an admin can get back to Admin settings.

When Keep mirror mode always on is off, mirror mode behaves as before and the kiosk stays available.


Configure the Ad URL

Important: The Ad URL is set per center and is shared with the Zenoti Mobile App mirror screen. Setting a new URL replaces the center's existing URL.

  1. In the Ad URL field, enter the URL of the web page you want to display on the mirror idle screen.

    • The field already shows https://. If you paste a URL that starts with http:// or https://, the prefix is removed.
    • An invalid URL cannot be saved.
  2. Select Save.

    • If the Ad URL field is empty when you save, a warning appears: "No advertisement URL is set. The mirror idle screen will be blank." The mirror idle screen is then blank.
    • An empty value does not erase the center's existing URL.

Worked example: A center wants to display a seasonal promotion during idle time. The administrator enters www.centerbrand.com/summer-promo after the prefilled https:// in the Ad URL field and selects Save. Between checkout sessions, the mirror shows the promotion page in full-screen view.

How the idle screen behaves

The following table summarizes mirror behavior based on your settings.

Mirror mode Keep mirror mode always on Ad URL Behavior
Off N/A N/A Mirror mode is off
On Off N/A Mirror mode behaves as before; the kiosk stays available
On On Empty The kiosk is unavailable; the mirror idle screen is blank (a warning appears when you save)
On On Valid URL The kiosk is unavailable; the advertisement web page is shown on the mirror idle screen

When the front desk starts a POS checkout, the mirror screen shows the invoice, tips, payment and thank-you screens, then returns to the idle ad or the blank screen.

Tips

  • Test the URL in a desktop browser before entering it in the kiosk settings to confirm the page loads correctly and is formatted for full-screen display.
  • Because the Ad URL is set per center and shared with the Zenoti Mobile App mirror screen, coordinate with other administrators before changing it during business hours.
  • Use Keep mirror mode always on only on a device you dedicate to mirroring, because the kiosk is unavailable to guests while it is on.
  • Restarting the kiosk turns Keep mirror mode always on off. Turn it on again after a restart if the device should keep mirroring.
  • If the Ad URL field is not visible, confirm that Mirror mode is on and Keep mirror mode always on is on and confirmed. Each field is revealed progressively as its parent toggle is enabled.

Troubleshooting

Symptom Likely cause Resolution
The Keep mirror mode always on sub-toggle is not visible Mirror mode is turned off Turn on the Mirror mode toggle first. The sub-toggle appears only when Mirror mode is on.
The Ad URL field is not visible Keep mirror mode always on is off or not confirmed Turn on Keep mirror mode always on and confirm the prompt. The URL field appears only after that.
The URL cannot be saved The entered URL is not valid Check that the URL forms a complete, valid web address, then try saving again.
The mirror idle screen is blank The Ad URL is empty Enter a valid URL in the Ad URL field and save.
Guests cannot use the kiosk Keep mirror mode always on is on, so the device is used only as a mirror display Open Admin settings (use the admin shield on the mirror screen) and turn Keep mirror mode always on off.
Mirror mode is off after the kiosk restarted Restarting the kiosk turns Keep mirror mode always on off Turn on Keep mirror mode always on again in Admin settings.
Saving an empty Ad URL did not remove the old URL An empty value does not erase the center's existing URL Enter a new URL and save to replace it.
Was this article helpful?
Your feedback helps us improve our documentation.