ZenotiHelp

Admin Settings β€” Terminal Battery Indicator (New Kiosk)

ZTZenoti Docs Team Updated November 11, 2026 3 min readHow-to

The new kiosk admin settings screen includes a compact terminal battery indicator that shows the current charge level of the connected card reader as an icon and a numeric percentage. Administrators can check device charge at a glance without navigating away from the admin panel.

Note: For conceptual background on the new kiosk and its admin settings panel, see Admin Settings panel.

Audience: Center administrators who monitor and manage new kiosk hardware.


On this page


Before you begin

  • The new kiosk must be enabled at both the organization level and the center level. For activation steps, see Enable New Kiosk β€” Organization and Center Gating.
  • The terminal battery indicator is visible only on the new kiosk. It does not appear on the legacy (web-based) guest kiosk.
  • A card reader must be paired with the kiosk device over Bluetooth. If no card reader is connected, the indicator is not displayed.
  • You need the Edit permission on the Organizations security object to access the admin settings screen.

How the battery indicator works

The terminal battery indicator appears on the new kiosk admin settings screen. It displays the connected card reader's current battery level as an icon paired with a numeric percentage β€” for example, Battery: 75% β€” with no additional text labels. The icon and its color alone communicate the charge state, keeping the display compact.

The indicator updates to reflect the current charge level each time you open the admin settings screen. It is a read-only status display; there are no actions to take from the indicator itself.

Important: If the battery level is in the amber or red state, charge the card reader before guest sessions begin to avoid interruptions during payment.

Color-coded charge states

The indicator uses three color states so you can assess device charge at a glance.

Color Charge level What it means
Green 50% and above Charge is sufficient for normal operation.
Amber 20–49% Charge is getting low. Consider charging the reader soon.
Red Below 20% Charge is critically low. Charge the reader before accepting payments.

Note: Place notes after this table. Do not rely on the numeric value alone β€” use the color state as your primary signal when scanning the admin panel quickly.

Tips

  • Check the indicator before opening. Review the battery level at the start of each day or shift before the first guest session begins, so low charge does not interrupt a payment flow.
  • Charge proactively at amber. An amber indicator means the card reader has between 20% and 49% charge remaining. Do not wait for a red state β€” connect the reader to power during a quiet period.
  • Keep a charging routine. Establish a consistent end-of-day charging habit so the card reader starts each day in the green state. Refer to your card reader's hardware documentation for connector type and charging method.
  • Pair the reader before opening. If the indicator is absent on the admin settings screen, verify that Bluetooth is enabled on the kiosk device and that the card reader is paired. The prompt Enable bluetooth to continue appears during guest payment if Bluetooth is off.

Troubleshooting

The battery indicator does not appear on the admin settings screen.

The indicator is only shown when a card reader is actively paired with the kiosk device over Bluetooth.

  • Confirm that Bluetooth is enabled on the kiosk device.
  • Confirm that the card reader is powered on and paired.
  • If the reader is paired but the indicator is still absent, restart the card reader and re-open the admin settings screen.

The percentage shown seems lower than expected after charging.

  • Confirm that the card reader was fully seated on its charger or that the charging cable was securely connected during the charge cycle.
  • Check the card reader's indicator lights (if any) to verify charging completed. Refer to the reader's hardware documentation for charging confirmation behavior.
  • If the charge level does not update after a confirmed full charge, restart the card reader, then re-open the admin settings screen.

The indicator is stuck on red even though the reader shows a full charge on its own display.

  • Disconnect and re-pair the card reader via Bluetooth, then re-open the admin settings screen to force a refresh of the reported battery level.
  • If the discrepancy persists, contact your card reader vendor to verify the device is reporting its battery status correctly over Bluetooth.
Was this article helpful?
Your feedback helps us improve our documentation.