ZenotiHelp

Set up and configure the guest kiosk

ZTZenoti Docs Team Updated September 16, 2026 16 min readGuide

The guest kiosk is controlled by a combination of organization-level and center-level settings. Organization-level settings define the core kiosk capabilities available to all centers, while center-level settings allow each center to customize the kiosk experience for its specific operational needs. This article provides a consolidated reference of all kiosk settings organized by function.


On this page

Before you begin

  • You need administrator access at the organization level to modify organization-scoped settings.
  • You need center-level administrator access to modify center-scoped settings.
  • Changes to settings take effect immediately for new kiosk sessions. Active kiosk sessions may need to be refreshed.
  • Two separate kiosks exist at Zenoti β€” the legacy kiosk (web, full guest journey) and the new kiosk (native mobile, full self-service: check-in, payment, feedback). They are activated by different settings and a center runs one or the other, never both at the same time. Some settings apply only to the legacy kiosk β€” the table rows flag that explicitly.

Permission: Edit permission under Organizations is required to modify organization-level settings. Center-level settings require Edit permission at the center scope.

Enable the kiosk

Two separate kiosks exist β€” the legacy kiosk (web, full guest journey) and the new kiosk (native mobile app, full self-service: check-in, payment, feedback). A center runs either one or the other, never both at the same time. Choose one of the two enable paths below.

Enable the legacy kiosk

  1. Navigate to Configuration at the organization level.
  2. Locate Enable Kiosk and set it to On.
  3. Navigate to Configuration at the center level and select the target center.
  4. Locate Enable Kiosk mode and set it to On.
  5. Remote guest access via a web browser (online kiosk mode) depends on the organization setting Enable online kiosk (Deprecated). This setting is deprecated and is not shown to customer administrators; it is managed by Zenoti Support.

Once both levels are enabled, the legacy kiosk URL becomes available. Load it on an in-store tablet (iPad or Android), or share the online-mode URL with guests for remote access.

Enable the new kiosk

  1. Navigate to Configuration at the organization level.
  2. Locate Enable new Kiosk and set it to On.
  3. Navigate to Configuration at the center level and select the target center.
  4. Locate Enable new Kiosk (center-level β€” same label as the org-level setting) and set it to On.
  5. If the legacy kiosk is enabled at this center, turn Enable Kiosk mode off β€” a center cannot run both kiosks simultaneously.
  6. Install the Zenoti Mobile App (ZMA) or the Zenoti Kiosk App (ZKA) on the kiosk device and sign in.

The new kiosk currently supports check-in only. Guests book through the Webstore and then use the kiosk to check in when they arrive.

Feature activation settings

These settings control whether the kiosk feature is available. Two separate kiosks exist β€” the legacy kiosk and the new kiosk β€” and each has its own activation pair.

Setting Description Default Scope
Enable Kiosk Master toggle that activates the legacy guest kiosk for the organization. Both this setting and the center-level Enable Kiosk mode must be active for the legacy kiosk to work. Disabled Org
Enable Kiosk mode Activates the legacy kiosk at a specific center. Requires the organization-level Enable Kiosk to also be enabled. Disabled Center
Enable online kiosk (Deprecated) Deprecated; visible to Zenoti Support only, not to customer administrators. Enables remote guest access to the legacy kiosk through a web browser. When enabled, the system checks center online booking hours before allowing guest login. When disabled, the legacy kiosk operates in in-store mode only. The new kiosk does not support online kiosk mode. Disabled Org
Enable new Kiosk (org) Activates the new guest kiosk for the organization. The new kiosk is a native mobile experience delivered through the Zenoti Mobile App (ZMA) and the Zenoti Kiosk App (ZKA). Currently supports check-in only. Disabled Org
Enable new Kiosk (center) Activates the new kiosk at a specific center. Same label as the org-level setting β€” the distinction is the scope. A center cannot run both the legacy and the new kiosk simultaneously. Disabled Center
Enable Kiosk relaunch from ZMA Enables the Customer Kiosk shortcut in the Zenoti Mobile App (ZMA). When on, staff can launch the legacy kiosk directly from ZMA via Settings > Customer Kiosk. Disabled Org
Enable Automatic Guest CheckIn For Online Kiosk When enabled and the kiosk is in online mode, guests who sign in are automatically checked in to their upcoming appointment without an additional confirmation step. Disabled Org

Note: The new-kiosk activation settings use the same label (Enable new Kiosk) at both scopes. A center must have the organization-level toggle on before its own center-level toggle takes effect.

Guest identification and registration settings

These settings control how guests identify themselves and register on the kiosk.

Setting Description Default Scope
Allow new guests to sign up at the Kiosk Legacy kiosk only. Allows new guests to create a profile through the legacy kiosk (by tapping Add New Person). When disabled, only existing guests can use the kiosk. The new kiosk does NOT honor this setting β€” unrecognised guests on the new kiosk always see a QR code redirecting to the Webstore. Enabled Center
Allow guests to sign in using their phone number Displays the mobile number input field on the login screen. When disabled, guests identify by email only. Enabled Center
Show last name of guest in Kiosk Displays the last name field on the registration form and identification results. Disabled Center
Show date of birth of guest in Kiosk Displays the date of birth field on the registration form. Disabled Center
Prompt guest to collect their information and consent Prompts guests to complete mandatory profile fields and provide consent before proceeding to service selection. Disabled Center
Enable Terms and Conditions Displays terms and conditions that the guest must accept before completing their booking. Disabled Center
Enable quick booking of previous visits When enabled, returning guests can re-book their previous services directly from the kiosk home screen without browsing the full service catalog. Disabled Center
Prompt guest to receive marketing emails Displays a marketing email opt-in prompt to guests during the kiosk flow. Disabled Center

Service and provider selection settings

These settings control what guests see on the service and provider selection screens.

Setting Description Default Scope
Show category filter Groups services by category on the selection screen. Disabled Center
Frequent Services Display Count Number of frequently selected services displayed at the top of the list. Set to 0 to disable. 0 Center
Show the preferred stylist drop-down list Allows guests to select a preferred provider. When disabled, the system assigns a provider automatically. Enabled Center
Show the preferred time drop-down list Allows guests to select a preferred appointment time. When disabled, the system selects the next available time. Disabled Center
Show gender preference for providers Legacy kiosk only. Displays the Any Male and Any Female options alongside Any Provider on the provider selection screen. The new kiosk always shows its own variants (Next available (Male) / Next available (Female)) and does not honor this toggle. Disabled Center
Book multiple services with the same provider When a guest picks Any Provider and books multiple services, Zenoti automatically assigns the same provider to all services where possible, so the guest stays with one provider across the visit. This setting does NOT restrict the booking to one provider for the entire visit β€” it is a convenience assignment. Incompatible with Parallel Booking: disable this before enabling Parallel Booking. Disabled Org
Show service description Shows the service description text on the service catalog card so guests can read details before selecting. Disabled Center
Display therapist from most recent visit in therapist drop-down list Pre-selects the guest's most recently seen provider during the provider selection step. Disabled Center
Suggest addons based on time Displays time-aware add-on suggestions during booking, showing add-ons that fit within the guest's available time. Disabled Org
Auto fill packages Automatically applies a guest's available package redemptions during the booking flow based on their service history. Disabled Center
Auto fill memberships Automatically applies a guest's membership benefits during the booking flow based on their membership history. Disabled Center

Note: "Show Wait Time" is a queue configuration setting β€” it is NOT a kiosk setting. For the kiosk-side waitlist display, see the Display waitlist based on setting in the Wait time notification settings section below.

Pricing display settings

These settings control how service prices appear on the kiosk.

Setting Description Default Scope
Show the price while booking a service Displays service prices on the kiosk. When disabled, no pricing is shown. Disabled Center
Display price as a range Displays prices as a range for services with variants at different price points. Available when the list of services is less than 200 services. Disabled Center
Display price with a label Displays a label (such as "Starting") before the price. Disabled Center
Enter a prefix for Service Price Custom text for the price label prefix. Starting Center
Enable Tax Inclusive Pricing Includes tax in displayed prices. Disabled Org

Booking and check-in settings

These settings control the booking confirmation and check-in process.

Setting Description Default Scope
Allow guests to book new appointments Legacy kiosk only. Allows guests to book appointments through the legacy kiosk. When disabled, the legacy kiosk is check-in only. The new kiosk has its own service catalog and does not use this setting. Enabled Center
Enable Group booking Allows a guest to book for multiple people in a single session. Group bookings are capped at 5 members including the host (host + 4 additional guests). Supported booking types: single, group, bulk, couples. Legacy kiosk only. Disabled Center
Allow guests to book despite warnings Legacy kiosk only. Allows bookings with minor slot conflicts by displaying a warning instead of blocking. Disabled Center
Therapist Authorization Requires a provider to authorize the kiosk session before the guest proceeds. In-store mode only. Disabled Center
Enable guest & service forms Displays guest intake forms and service-specific forms. Placement differs between the two kiosks: the legacy kiosk shows forms after check-in; the new kiosk shows forms between time-slot selection and the final confirmation screen. Disabled Center
Block check-ins if forms are not filled Legacy kiosk only. When enabled, the guest cannot complete check-in on the kiosk until every form assigned to their appointment has been filled in. When disabled, the guest may skip forms and proceed directly to check-in. Forms that are hidden by Hide internal service and tag forms, or forms that are emailed via the per-form Email form link property, do NOT count toward the completion requirement β€” only forms actually shown on the kiosk screen do. Disabled Center
Hide internal service and tag forms Legacy kiosk only. When enabled, forms flagged internal (internal service forms and tag forms) are not shown on the kiosk screen. Exception: if a hidden form has Email form link turned on in its own properties, the form is emailed to the guest with a deep link instead of being rendered on the kiosk. Disabled Center
Enter the message you want to use to confirm check-in Custom message displayed after check-in confirmation. Empty Center
Show Room Association Displays room assignment information after check-in. Disabled Center
Enter the duration (in seconds) for confirmation dialog box Seconds the waiting and confirmation screen is displayed before returning to the login screen. 30 Center

Note: The Common form for all services on same day setting in the Forms module also affects kiosk form behavior. When this setting is enabled, a guest booking multiple services on the same day sees a single shared form instead of a separate form for each service. This setting is not in the kiosk settings; configure it in the Forms module.

Payment settings

These settings control kiosk payment behavior.

Setting Description Default Scope
Send OTP by [Email, Text, Either] Verification channel when a guest adds a card on file: Text, Email, or Either. Shown under Enable card on file during check-in together with Enable OTP authentication when guests add card on file. Text Org
Enable card on file during check-in Enables card-on-file capture during the legacy kiosk check-in flow. All three conditions must be met: (1) this org-level setting is on, (2) the center-level Can save cards in Kiosk toggle is on, and (3) the kiosk is in in-store mode (card on file is NOT available in online kiosk mode). Disabled Org
Enable guest self checkout Allows guests to complete self-service checkout at the kiosk without staff assistance. Disabled Org
Enable Auto-Pay Enables automatic payment using the guest's card on file. Requires center-level auto-pay to also be active. Disabled Org

Feedback and rebooking settings

Note: Stripe and Adyen payment integrations are configured at the organization level through payment provider settings. For payment provider configuration, see your organization's payment settings.

These settings control post-service feedback and rebooking.

Setting Description Default Scope
Collect Feedback Enables post-service feedback collection. When enabled, the kiosk displays a feedback screen after the service is completed. Disabled Center
Rebook add-on When enabled, the rebook flow includes the add-ons from the original appointment so the guest does not need to reselect them. Disabled Org

Branding and display settings

Note: The rebook flow is always available after feedback (or after skipping feedback). There is no separate setting to control rebooking independently.

These settings control the kiosk's visual appearance.

Setting Description Default Scope
Enter the path to the background image URL or file path to a custom background image for the kiosk (shown with the Show background image toggle). Default system image Center
Display Marketing Banner Enables a marketing banner on the kiosk login screen. Disabled Org
Marketing Banner HTML HTML content for the marketing banner. Empty Org
Guest Kiosk Online Display Position Controls the kiosk layout in online mode. Default Center
Guest Kiosk At Store Display Position Controls the kiosk layout in in-store mode. Default Center
Customize theme for new kiosk Opens the theme customization panel for the new kiosk. Available only when the new kiosk is enabled. β€” Org

Wait time notification settings

These settings control the waitlist display and guest notifications for wait time updates.

Setting Description Default Scope
Display wait time to guests during booking Master toggle that enables the wait-time display on the kiosk. Must be on before Display waitlist based on has any effect. Disabled Center
Display waitlist based on Controls what wait information the guest sees. Values: Wait times (shows estimated minutes remaining) or Queue position (shows the guest's numeric place in the queue). Requires Display wait time to guests during booking to be enabled. Wait times Center
Enable wait time notifications for guests Enables notifications to inform guests about their wait status. When disabled, guests see wait information on the kiosk screen only. Disabled Center
Enable Threshold notification Parent toggle for threshold-based notifications. When on, the First and Second Threshold settings below are available. Requires Enable wait time notifications for guests to be on. Disabled Center
Enable First Threshold notification Sends a notification when the guest's estimated wait time crosses the configured first threshold (in minutes). Requires Enable wait time notifications for guests to be on. The threshold minutes value is configured in a companion field on the same panel. Disabled Center
Enable Second Threshold notification Sends a notification when the guest's estimated wait time crosses the configured second threshold (in minutes). Requires Enable wait time notifications for guests to be on. The threshold minutes value is configured in a companion field on the same panel. Disabled Center

Google Analytics and Tag Manager settings

Note: Wait time notifications require the guest to have a valid mobile number or email on file. The notification channel (SMS or email) is determined by the guest's contact preferences.

You can configure Google Tag Manager (GTM) and Google Analytics (GA4) to track guest interactions on the kiosk.

Setting Description Default Scope
Add a Google Tag Manager script The GTM container script for the kiosk. Empty Org
Add a Google Analytics script The Google Analytics script for the kiosk. Empty Org
Add a Google Analytics ID The GA4 Measurement ID for event tracking (for example, G-XXXXXXXXXX). Empty Org

For detailed setup instructions, see Set up kiosk analytics tracking.

Device recommendations

The guest kiosk is designed for tablet devices with a touchscreen.

For the legacy kiosk (web-based):

  • Any iPad model is supported, including iPad Mini. Supported minimum: iPad Air 2 or later, iPad 5th generation or later, or iPad Pro 2nd generation or later; iOS 13 or later. A 10-inch or larger screen in landscape orientation is recommended for the best guest experience.
  • Android tablets require Android 10 or later.
  • Windows touchscreen devices are supported using Chrome or Edge.
  • Not supported: Amazon Fire tablets. Fire OS is not validated and is not a supported kiosk device.
  • Use a modern browser (such as Chrome or Safari) in full-screen or kiosk browser mode.
  • The device must have a reliable Wi-Fi or wired network connection. The legacy kiosk communicates with Zenoti servers for every step of the guest workflow, including guest lookup, slot reservation, and payment processing. An unstable connection may cause timeouts or errors.

For the new kiosk (native mobile app):

  • The new kiosk runs on the Zenoti Mobile App (ZMA) or the Zenoti Kiosk App (ZKA). Hardware and OS requirements are governed by the app's store listing. Any iPad model is supported.

Note: The Zenoti Mobile application may not be available on the Play Store for certain locations, including Georgia, Macau SAR China, and Solomon Islands. In those regions, contact Zenoti Support for alternative installation options.

Note: Neither kiosk supports offline mode. An active internet connection is required at all times.

Lock down the kiosk device

For in-store deployments, lock down the tablet so that guests cannot exit the kiosk app and access other device features.

Guided Access on iPad

Guided Access locks an iPad to a single app so guests cannot exit to the home screen or open other applications.

  1. On the iPad, open Settings.
  2. Navigate to General > Accessibility > Guided Access.
  3. Toggle Guided Access to On.
  4. Tap Passcode Settings and set a Guided Access passcode. This passcode is required to exit Guided Access mode. Keep it known only to staff.
  5. Optionally, enable Touch ID or Face ID so that a biometric scan can also exit Guided Access.
  6. Open the kiosk app on the iPad.
  7. Triple-click the Home button (or the Side button on iPads without a Home button) to start Guided Access. The iPad is now locked to the kiosk app.
  8. To exit Guided Access, triple-click the same button again and enter the Guided Access passcode.

Android kiosk mode

Most Android tablets support a screen pinning or kiosk mode feature. Refer to your specific device documentation for instructions on how to lock the device to a single app.

Verify the kiosk is active

After enabling the kiosk settings:

  1. Open the kiosk URL for the center on a tablet or browser.
  2. Confirm that the login screen loads and displays the guest identification fields.
  3. Test a complete guest journey: identify, select a service, choose a provider, confirm the booking, and verify that the appointment appears in the queue with a Checked In status and a Kiosk booking source.

If the legacy kiosk does not load, verify that both the organization-level Enable Kiosk and the center-level Enable Kiosk mode settings are turned on. If the new kiosk does not load, verify Enable new Kiosk is on at both the organization and center level.

Tips

  • Start with a minimal legacy-kiosk configuration by enabling only the essential settings (Enable Kiosk, Enable Kiosk mode, Allow guests to book new appointments, Allow guests to sign in using their phone number). Add optional features such as feedback collection, group booking, and form prompts once the basic flow is working.
  • Use Enter the message you want to use to confirm check-in to give guests clear instructions about what to do after check-in. A short, direct message such as "Please take a seat. Your provider will be with you shortly." improves the guest experience.
  • If your center requires complete guest profiles, enable Prompt guest to collect their information and consent to ensure guests fill in required information during their first visit.
  • Configure Display waitlist based on for walk-in centers where guests make decisions based on how long they will wait. Hiding wait information is appropriate for appointment-heavy centers where wait times are minimal.
  • Before switching a center from the legacy kiosk to the new kiosk, review the key UX differences: provider-picker labels, forms placement, and the employee-login activation requirement all differ. See New kiosk overview for a full legacy-vs-new comparison.
Was this article helpful?
Your feedback helps us improve our documentation.