ZenotiHelp

Set up new kiosk

ZTZenoti Docs Team Updated September 16, 2026 4 min readGuide

Beta: New Kiosk is currently in beta. For the stable experience, see Set up the guest kiosk.

This article walks through setting up New Kiosk from scratch: enabling the feature in admin settings, activating the device, and verifying the setup is working correctly.

Audience: Administrators with Edit permission on Organizations.


On this page


Before you begin

  • Confirm you have Edit permission on the Organizations security object.
  • Download the Zenoti Kiosk App (ZKA) from the App Store or Google Play on the tablet device you will use as the kiosk.
  • If your center currently runs the legacy kiosk, note that enabling New Kiosk will deactivate the legacy kiosk. Plan the transition accordingly and inform front desk staff.
  • Prepare your Zenoti account name and SSO credentials β€” you will need them during device activation.

Enable New Kiosk in admin settings

New Kiosk requires two settings: one at the organization level and one at the center level. Both must be enabled.

Organization level:

  1. Go to Configuration > Appointments > Kiosk (at the organization level).
  2. Turn on Enable new Kiosk.
  3. Select Save.

Center level:

  1. Go to Configuration > Appointments > Kiosk (at the center level) and select the center.
  2. Turn on Enable new Kiosk.
  3. If Enable Kiosk mode is currently on (legacy kiosk), turn it off. A center runs either the legacy or New Kiosk β€” not both simultaneously.
  4. Select Save.

Note: The Enable new Kiosk setting label is the same at both the organization and center level. The scope (org vs. center) determines which level the setting applies to.

Activate the kiosk device

  1. On the tablet, open the Zenoti Kiosk App (ZKA).
  2. The Employee Login screen appears with the heading "Employee Login" and subtitle "Enter your employer account name to continue".
  3. In the Account Name field, enter your organization's Zenoti account name β€” the subdomain from your portal URL (for example, yourcompany from yourcompany.zenoti.com).
  4. Tap Proceed.
  5. Complete Zenoti SSO login when prompted. On success, the screen shows "Welcome, {name}!".
  6. The kiosk transitions to the guest-facing welcome screen. The device is now in guest mode and ready for use.

The kiosk remains in guest mode until the session expires or a staff member logs out via the Logout option in the app menu.

Emergency access only: An emergency break-glass authentication screen exists for offline activation by authorized personnel. This is not the standard login path β€” use Zenoti SSO credentials for normal kiosk activation.

Verify the setup

After activation, confirm the kiosk is working correctly:

  1. On the welcome screen, tap Start Here.
  2. Enter a test guest's phone number or email address.
  3. Verify that the guest profile loads and the service catalog or check-in screen appears as expected.
  4. Confirm that the wait time panel is visible on the welcome screen if Display waitlist based on is configured at the center level.
  5. Return to the welcome screen by tapping Exit or allowing the session idle timeout.

Configure optional features

After basic setup, configure these optional features as needed:

Feature Where to configure
Wait time display Configuration > Appointments > Kiosk (at the center level) β€” Display waitlist based on
Wait time notifications Same panel β€” Enable wait time notifications for guests, Enable First Threshold notification, Enable Second Threshold notification
Guest sign-in mode Allow guests to sign in using their phone number or Allow guests to sign in using their phone number or email address
Mandatory field collection Prompt guest to collect their information and consent
New Kiosk branding Configuration > Appointments > Kiosk (at the organization level) β€” Customize theme for new kiosk
Bluetooth card reader Pair the card reader with the tablet via Bluetooth before the first payment transaction
Guided Access (iPadOS) Settings > General > Accessibility > Guided Access on the iPad

For branding configuration, see Configure New Kiosk branding.


Tips

  • Set up Guided Access on iPadOS to lock the device to the kiosk app and prevent guests from switching to other applications. See Get started with New Kiosk for the Guided Access setup path.
  • To confirm which kiosk version a center is running, check the Settings > Kiosk panel for that center β€” Enable Kiosk mode (legacy) and Enable new Kiosk should not both be on.
  • Staff do not need to re-activate the kiosk between guest sessions β€” the device stays in guest mode continuously.

Troubleshooting

  • Employee Login fails with "Authentication failed". Verify the account name is correct (no .zenoti.com suffix) and that you have a valid Zenoti SSO session. Contact your Zenoti administrator if the SSO login is blocked.
  • New Kiosk is enabled but the legacy kiosk still appears. Check that Enable Kiosk mode is off at the center level. If both settings are on simultaneously, behavior is undefined.
  • The welcome screen shows no wait times. Confirm Display waitlist based on is configured at the center level and that guests are currently in the queue.

What to configure next

  1. Configure branding (optional) β€” Configure New Kiosk branding
  2. Set up payment terminals β€” pair Bluetooth card readers before the first guest payment
  3. Configure wait time notifications β€” Configure wait time notifications
  4. Train front desk staff on the employee login process and idle session handling

Was this article helpful?
Your feedback helps us improve our documentation.