ZenotiHelp

Accept card payments in mirror mode

ZTZenoti Docs Team Updated July 13, 2026 6 min readGuide

Mirror mode turns a connected iPad or customer-facing display into a guest-controlled checkout surface. The guest sees their invoice total, selects a tip, and taps or inserts their card β€” all independently of the staff POS screen. This article covers how card acceptance works in mirror mode, how to initiate checkout, what the guest sees, and how to resolve the most common connectivity and processing errors.

Audience: Front-desk staff who initiate mirror-mode checkout at the POS; center managers who troubleshoot connectivity and register configuration.


On this page


Before you begin

Permission: Available to staff with POS access β€” no specific security object required for the mirror mode payment flow.

Important β€” register match precondition: The payment terminal must be registered to the same POS session and same register as the mirror device. A register mismatch produces a connectivity error and prevents the payment from proceeding. Before initiating checkout, confirm that the mirror device and the terminal are both assigned to the same register in your POS session. If you see a connectivity error, see Register mismatch error in Troubleshooting.

Additional prerequisites:

  • Mirror mode is available through Zenoti Mobile POS; no separate center-level configuration toggle is required.
  • The mirror device must be powered on, connected to the same network as the POS, and showing the mirror mode waiting screen.
  • The payment terminal connected to the register must support chip, contactless tap, and/or magnetic-stripe swipe (the methods the guest can use in mirror mode).
  • The guest's invoice must be open and items finalized before initiating the mirror checkout flow β€” add-ons after the mirror screen is shown require cancelling and restarting the flow.

How mirror mode works

Mirror mode separates the guest-facing and staff-facing sides of checkout:

  • Staff POS screen: The staff member initiates the checkout action from the POS and monitors the result. The staff screen does not show tip selection or payment prompts β€” those are guest-controlled on the mirror device.
  • Mirror device (customer-facing display): The guest sees the invoice total, tip options, and a card-tap prompt. The guest selects a tip (or skips it) and then taps, inserts, or swipes their card on the connected terminal.
  • Synchronization: When the guest confirms payment on the terminal, the result syncs automatically to the staff POS. The invoice closes on the staff screen without requiring any additional action from the front-desk staff.

Mirror mode supports all card types the connected terminal accepts β€” chip, contactless (NFC tap), and magnetic stripe. The specific methods available depend on the terminal hardware and processor configuration.


What the guest sees

When the staff member initiates the mirror checkout flow, the mirror device displays the following sequence:

  1. Invoice summary β€” a read-only view of the invoice total, itemized services, and center name.
  2. Tip selection β€” a set of preset tip buttons (for example, 15%, 18%, 20%), a Custom button for a free-entry amount, and a No Tip button. The preset percentages are configured at the organization or center level.
  3. Payment prompt β€” after tip selection, the mirror device shows a card-tap animation and the adjusted total (service total + selected tip). The guest taps, inserts, or swipes their card on the terminal.
  4. Processing indicator β€” a brief processing state while the terminal communicates with the processor.
  5. Confirmation β€” a success screen displayed to the guest after payment is approved. A receipt is sent to the guest via their preferred channel (email, SMS, or print) as configured in notification settings.

If the guest's card is declined, the mirror device shows a decline message and prompts the guest to try a different card or contact the front-desk staff.


Step-by-step: process a card payment in mirror mode

  1. Finalize the guest's invoice on the POS. Confirm all services and products are added before proceeding β€” the mirror screen does not support invoice edits once the checkout flow starts.
  2. On the Take Payment screen, select Credit/Debit to verify the amount and begin the mirror mode checkout flow.
  3. Select Collect Tips to hand control to the mirror device.
  4. The mirror device transitions from the waiting screen to the invoice summary and tip selection screen.
  5. Direct the guest to the mirror device: "Please select your tip and tap your card on the reader."
  6. The guest: a. Reviews the invoice total on the mirror device. b. Selects a tip β€” one of the preset percentages, a custom amount, or No Tip. c. Taps, inserts, or swipes their card on the connected terminal when prompted.
  7. The terminal processes the card. The mirror device shows a processing indicator, then a confirmation screen.
  8. The result syncs to the staff POS. The invoice status updates to Paid automatically.
  9. A receipt is sent to the guest via their preferred notification channel. If a printed receipt is needed, print it from the POS after the invoice closes.

Note: If the guest needs to use a saved card on file instead of tapping a physical card, initiate the payment as a Use a Saved Card flow from the POS, not mirror mode. Mirror mode is designed for physical card acceptance via the terminal hardware.


Tip selection reference

Option What it does
Preset percentage buttons (for example, 15%, 18%, 20%) Calculates the tip as a percentage of the invoice subtotal. The calculated amount is shown on the button or beneath it.
Custom Opens a numeric keypad on the mirror device. The guest enters a flat dollar amount as the tip.
No Tip Sets the tip to zero. The invoice total shown on the payment prompt equals the service total only.

The available preset percentages are configured by your organization administrator. If the percentages shown do not match your business's standard, contact your admin to update the tip preset configuration.


Troubleshooting

Register mismatch error

Symptom: The mirror device shows a connectivity error, or the POS shows a "device not connected" or "register mismatch" message when you attempt to initiate mirror checkout.

Cause: The payment terminal and the mirror device are not assigned to the same register in the current POS session.

Resolution:

  1. Select the cash register configured for your Zenoti Mobile POS session.
  2. Check the terminal's register assignment. If the terminal is assigned to a different register, re-assign it to match the current session register, or switch your POS session to the register the terminal is assigned to.
  3. On the mirror device, confirm it is connected and shows as active for the same register.
  4. Retry the checkout flow.

If the register assignment looks correct and the error persists, restart the mirror device and the terminal, then try again.

Mirror device not displaying the checkout screen

Symptom: After initiating mirror checkout from the POS, the mirror device stays on the waiting screen or does not update.

Resolution:

  1. Confirm the mirror device and the POS are on the same local network.
  2. Check that the mirror device's app is open and in mirror mode β€” a locked or backgrounded app does not receive the checkout signal.
  3. Confirm the mirror device is assigned to the same register as the active POS session.
  4. Restart the mirror mode app on the device if the screen does not update within 10–15 seconds of initiating checkout.
  5. If the issue persists, fall back to a standard POS checkout flow and contact your system administrator or Zenoti Support.

Card declined on the mirror device

Symptom: The mirror device shows a decline message after the guest taps, inserts, or swipes their card.

Resolution:

  1. Ask the guest to try the card again β€” a single tap failure can occur due to NFC positioning.
  2. If the card continues to decline, offer an alternative: a different card, cash, gift card, or other accepted payment method.
  3. To process the alternative payment, cancel the mirror checkout flow on the POS and initiate a standard payment from the POS using the guest's alternative method.
  4. Common decline causes: insufficient funds, card blocked by the issuing bank, expired card, or incorrect card orientation on the terminal. The mirror device does not surface the specific decline reason β€” for details, check your processor's transaction log.

Guest made a mistake on tip selection

Symptom: The guest selected the wrong tip amount and the payment has already been sent to the terminal.

Resolution: If the terminal has not yet completed the transaction (the card has not been read), cancel the mirror session from the POS and restart the checkout flow. If the payment has already been processed, the tip amount is captured. Issue a partial refund for the tip difference if the guest requests a correction β€” see Process payment refunds.


Was this article helpful?
Your feedback helps us improve our documentation.