ZenotiHelp

Set up contractor (self-employed) payments

ZTZenoti Docs Team Updated August 21, 2026 16 min readGuide

When your salon or spa hosts independent service providers under a chair-rental or booth-rental arrangement, those providers operate as W-9 self-employed contractors rather than W-2 employees. Each contractor receives payments for their own services directly through their own Stripe Express account; the host business retains all non-service revenue (products, classes, membership fees, gift card sales). This article walks through adding a contractor in Zenoti, the Stripe Connect Express KYC flow, how invoice payments split between the contractor and the host business, and the operational lifecycle (refunds, chargebacks, offboarding, tax reporting).

Audience: Organization administrators at salons or spas operating a chair-rental or booth-rental model where the business pays per-service revenue directly to independent service providers via Stripe Connect Express.

This is a different feature from multi-legal-entity payment routing. If your organization has multiple business units (legal entities) operating in one center and you need to route payments to the correct entity's merchant account, see Set up Zenoti payments for multiple legal entities in one center. That article covers BU-based routing; this article covers contractor (self-employed individual) routing.


On this page


Before you begin

Permission: Manage Employees (under Org Admin) β€” Required to add or edit employee records, including the Type of Employee setting that designates a contractor.

Permission: Manage Business Payments (under Payments) β€” Required to view contractor payment splits, refund routing, and the multi-MID transfers report.

  • Your organization must have Zenoti Payments on Stripe Connect Express. Contractor payment splits are a Stripe Connect Express capability; Adyen-, Element Express-, and FreedomPay-based organizations do not currently support this contractor flow in product.
  • Each contractor must have their own email address (used by Stripe Express to send the KYC invite) and access to a phone for SMS verification during Stripe KYC.
  • Contractors must be in a region where Stripe Connect Express supports business onboarding β€” typically the United States and a growing list of supported countries; confirm with Zenoti Support if you have non-US contractors.
  • The host business retains responsibility for the chair-rental fee or booth-rental fee charged to the contractor β€” that fee is not collected through this payment flow (see Pricing and commission).

How contractor payments work

Guest pays an invoice at the host business's POS
   ─► Invoice contains a mix of items: contractor services, employee services, products, etc.
   ─► At invoice closure, Zenoti splits the payment line-by-line:
         ─► Contractor service items   ──►  Contractor's Stripe Express account
         ─► Employee service items     ──►  Host business merchant account
         ─► Non-service items (products, classes, gift cards, packages, memberships) ──► Host business
         ─► Tips on contractor service line   ──►  Contractor
         ─► Tips on employee service line     ──►  Host business
   ─► Each leg is settled net of Stripe processing fees (proportional)
   ─► Contractor sees the deposit in their Stripe Express dashboard; business sees it in its merchant account

Each contractor has their own Stripe Express account, KYC-verified by Stripe directly. The host business is not the merchant of record for the contractor's services β€” the contractor is. This has implications for refunds and chargebacks (see those sections below).


Add a contractor in Zenoti

A contractor is added through the standard employee creation flow with the Type of Employee setting changed to Self employed.

Step 1: Open the employee directory

Navigate to Configuration > Employee > Add Employee**.

Step 2: Fill in employee details

The contractor record uses the same form fields as a regular employee. Key fields:

Field Required for contractors Notes
First name, Last name Yes The contractor's legal name (matches their tax form / Stripe KYC).
Email Yes The contractor's personal email β€” Stripe Express uses this address to send the KYC invite.
Phone Yes Used for SMS verification during Stripe KYC.
Center Yes The center(s) the contractor operates from.
Job (role) Yes The role the contractor performs at the center (e.g., Stylist, Therapist).
Type of Employee Yes β€” set to "Self employed" This is the field that designates a contractor. Critical: see immutability warning below.
Address, Date of Birth, Identification Optional in Zenoti, but required by Stripe Express during KYC The contractor enters these directly during Stripe KYC; you do not need to capture them in Zenoti.
Username, Password Optional Most contractors do not log into Zenoti β€” they manage their account through Stripe Express. If you do create Zenoti credentials, the role permissions determine what they can see.

Step 3: Save the record

Click Finish to save. The employee record is created with the Self employed type designation.

Important β€” the Type of Employee setting is irreversible. Once you save the contractor record, the Type of Employee field cannot be changed. The setting is immutable on update. If a contractor was added with the wrong type (or an employee was incorrectly designated as a contractor), the only path to fix it is to deactivate or delete the existing record and create a new one. Doing so creates a new identity in the system: appointment history, sales records, and commission records on the original record do not carry over to the replacement record. For this reason, confirm the Type of Employee selection carefully before saving.

Step 4: Reopen the contractor's employee record

After saving, close the employee form and reopen the contractor's employee record from the directory. On the reopened record, a new Payments tab is now visible. The Payments tab is hidden during initial creation and appears only on subsequent edits β€” see The Payments tab and Stripe Connect Express KYC.


The Payments tab and Stripe Connect Express KYC

The Payments tab is the contractor's onboarding entry point for Stripe Connect Express.

What the Payments tab contains

Field Description
Contractor email (display only) Echoed from the employee record. This is the email Stripe will use for the KYC invite.
KYC status The current Stripe-reported account state. Possible values: Verification Pending, Verified, Restricted, Disabled.
Send KYC invite / Resend KYC invite button Triggers (or re-triggers) the Stripe Express invitation email to the contractor.
Stripe Express account ID (display only, after Stripe creates it) The unique Stripe-side account identifier; shown for reference.

The KYC lifecycle

  1. Send KYC invite. The administrator clicks Send KYC invite on the Payments tab. Zenoti calls Stripe Connect Express to create a pending account for the contractor. Stripe emails the contractor a hosted KYC link.
  2. Contractor completes KYC. The contractor opens the email link and lands on Stripe's hosted Express portal. Stripe walks the contractor through identity verification (legal name, DOB, address, government ID upload), business details (sole proprietor, business name optional), bank-account linkage (where Stripe will deposit the contractor's earnings), and tax-form W-9 submission. Zenoti does not capture or store any of these details β€” Stripe is the system of record for the contractor's identity and banking information.
  3. KYC status updates. The Payments tab's KYC status field reflects Stripe's reported state:
  • Verification Pending β€” Invite sent, contractor has not completed (or has partially completed) KYC.
  • Verified β€” Stripe has approved the contractor's account; payments can route to it.
  • Restricted β€” Stripe has flagged the account (typical causes: identity verification documents required; suspicious activity; bank account un-verified). The contractor must resolve through Stripe Express; some payouts may be held by Stripe until resolved.
  • Disabled β€” Stripe has terminated the account (typically permanent). Re-onboarding requires a new Stripe Express account.
  1. Resend if needed. If the contractor has not completed KYC within 7 business days (or any reasonable window), the administrator can click Resend KYC invite. Stripe re-issues the invitation email.
  2. Failure modes. If Stripe rejects the contractor's KYC (identity verification fails; the bank account is unsupported; the contractor is in a non-supported region), the KYC status reflects the rejection. Resolution is between the contractor and Stripe; the host business administrator can resend the invite or contact Zenoti Support to escalate.

Important β€” admin visibility is via KYC status only. The host business administrator does not see the contractor's KYC documents, bank account number, tax ID, or Stripe-internal data. Only the Stripe-reported status code and the email address are visible in Zenoti.


Payment split rules

When a guest pays an invoice at the host business's POS, Zenoti splits the payment line-by-line based on each line item's attribution and revenue type.

Line item Routes to
Service performed by a contractor Contractor's Stripe Express account
Service performed by an employee (W-2) Host business merchant account
Tip on a contractor's service line Contractor
Tip on an employee's service line Host business
Tip on a product (no service) Host business
Product (retail item) Host business
Class (group class, fitness class) Host business
Workshop Host business
Gift card purchase Host business
Gift card redemption (the guest pays with a gift card) The original sale of the gift card already routed funds; redemption is a draw against host-business obligation. No contractor split occurs at redemption.
Package purchase (sold at checkout) Host business
Package redemption (the guest is consuming a previously-bought package; the contractor performs a service from the package) The contractor receives credit for the service via the package's commission/redemption rate; the package's original payment already settled to the host business when the package was sold.
Membership purchase (one-time fee or first instalment) Host business
Membership recurring autopay charge Host business
Membership-funded service (the guest's visit is included as a membership benefit) The contractor receives credit for the service per the membership benefit rules; no separate guest-side payment occurs at the visit.

How the split is computed

The split is computed at invoice closure, not at item creation. This means:

  • Edits to the invoice's line items (adding/removing services, switching the assigned provider) before closure update the future split.
  • Once the invoice is closed and payment is processed, the split is final.
  • For invoices with multiple service providers (contractor A performs hair; contractor B performs nails; employee C performs facial; the guest also buys a product), each line routes to its assigned destination independently.

Note β€” guest-facing experience is unchanged. The guest sees a single invoice and makes a single payment. The split happens behind the scenes; the guest does not interact with the contractor's Stripe Express account directly.


Open invoices and the virtual Stripe holding account

Partial payments on open invoices (paid via card) are held in a Zenoti virtual Stripe account until the invoice is closed.

Why funds are held

The split (which contractor / which employee / which revenue type) is computed at invoice closure. If a guest pays a deposit or a partial amount before the invoice is finalized, the destination of that money cannot yet be determined. Holding it in a virtual Stripe account preserves the funds until the split rules can be applied.

What the administrator can see

Funds in virtual holding are visible in the host business's merchant-account dashboard as "pending" or "held" balances against open invoices. Each held balance is tagged to the originating invoice ID.

When the funds are released

On invoice closure, the held funds are released and split per Payment split rules. If the invoice is closed within minutes (typical), the hold is brief; if the invoice stays open for days or weeks (unusual but possible), the funds remain in the virtual account for that duration.

Important β€” long-held invoices. If your operation regularly leaves invoices open for extended periods, monitor virtual-holding balances. Funds in a virtual account are not yet in your operating account or the contractor's Stripe Express account. Closing invoices promptly is the cleanest practice.


Processing fees on contractor payments

The standard Stripe processing fee (typically 2.9% + 30Β’ per transaction in the US, varying by region and card type) is deducted from each leg of the split proportionally.

Scenario Who pays the processing fee
Contractor service portion Deducted from the contractor's portion before settlement to the contractor's Stripe Express account
Host business portion (products, employee services, etc.) Deducted from the host business's portion before settlement to the host business merchant account

The processing fee is proportional β€” if a $100 invoice splits 60% to a contractor service and 40% to the host business, the processing fee is split 60/40 on the same proportions.

The contractor sees the net (post-fee) amount in their Stripe Express dashboard. The host business sees the net (post-fee) amount in its merchant account. Neither party absorbs the other's fee.

Note. The chair-rental or booth-rental fee that the host business charges the contractor (e.g., "$200/week for the chair") is a separate billing arrangement outside of this payment flow. See Pricing and commission.


Refunds on contractor services

When a guest is unhappy with a contractor's service and the host business issues a refund:

  1. The host business administrator initiates the refund through the standard Zenoti refund flow against the original invoice.
  2. The refund amount for the contractor service line is debited from the contractor's Stripe Express account proportionally to the original split.
  3. The host business does not need to fund the refund out of pocket β€” the funds come from the contractor's Stripe Express balance.
  4. If the contractor's Stripe Express balance is insufficient to cover the refund (rare; would require the contractor to have already withdrawn the funds), the host business absorbs the shortfall and may recover from future contractor payouts via reconciliation. There is no automated recovery mechanism in product; the host business and contractor must agree on settlement separately.

The contractor does not have refund-initiation authority through Zenoti. Only the host business administrator (with the appropriate permission) can initiate a refund.


Chargebacks and disputes

When the card network initiates a chargeback (the guest disputes the transaction with their issuing bank), the chargeback flows against the merchant of record β€” which is the host business, regardless of whether the disputed transaction was a contractor service.

  • The chargeback amount is debited from the host business's merchant account.
  • The associated dispute fee (typically $15-$25 per chargeback in the US) is debited from the host business's account.
  • The host business is responsible for defending the dispute through the standard chargeback workflow.

If the disputed transaction was a contractor service, the host business bears the cost of the chargeback even though the service was performed by the contractor. This is a real financial risk for the host business when operating chair-rental contractors.

Recovery from the contractor (if the host business and contractor have agreed that contractor services are the contractor's risk) is not automated through Zenoti. The host business and contractor must settle separately through a billing arrangement outside of product.

For details on the dispute defense workflow itself, see Defend payment disputes.


Pricing and commission

This article covers payment routing and split mechanics. Pricing the service and the commission/rental arrangement between the host business and the contractor are not configured through the contractor-payments flow.

Question Answer
Where does the host business set service prices? In the standard service catalog (Master data > Services). Prices set at the service level apply when any provider β€” contractor or employee β€” performs the service.
Does the contractor get 100% of the service price? Yes β€” by default, the contractor receives the full service-line revenue net of processing fees. There is no built-in "host business takes a percentage" cut at the payment-split level.
What about the chair-rental / booth-rental fee? That fee is the host business's revenue from the contractor and is billed separately, outside of Zenoti's payment-split flow. The host business and contractor have an independent business arrangement (e.g., "$200/week for the chair, paid weekly via Venmo"). Zenoti does not invoice the contractor for the rental fee.
Can I take a percentage of the contractor's service revenue automatically? Not through this contractor-payments flow. If you need an automated percentage cut, two options: (a) charge the contractor a fixed weekly/monthly rental fee outside of Zenoti, or (b) operate the providers as commissioned employees (W-2) instead of contractors, in which case standard commission configuration applies.

Note. If your operating model requires a percentage-of-revenue cut to the host business, the contractor model is likely not the right fit β€” consider commissioned employee + standard commission configuration. The contractor model is designed for the chair-rental / booth-rental case where the contractor pays a flat rental and keeps their own service revenue.


Contractor visibility and earnings access

Contractors access their earnings primarily through their Stripe Express dashboard, not through Zenoti.

What the contractor can see Where
Per-transaction earnings deposited to their Stripe Express account Stripe Express dashboard (Stripe-hosted, contractor-authenticated via the Stripe Express link / mobile app)
Bank deposits (Stripe payouts to their linked bank account) Stripe Express dashboard
Tax form (1099-K or 1099-NEC, US) Stripe Express, end of tax year
Their split breakdown inside Zenoti Not visible by default β€” contractors do not have a Zenoti login unless explicitly created

If the host business creates a Zenoti login for the contractor (for example, to let them book their own appointments), the role permissions determine what they see β€” but standard contractor roles do not expose the multi-MID payment split data. Contractors who want a payout dispute resolved should escalate to the host business administrator, who can review the multi-MID transfers report (see Reports for contractor reconciliation).


Contractor offboarding

When a contractor stops working at the center, follow the standard employee deactivation flow.

Steps

  1. Confirm there are no open invoices with contractor service lines. Close any open invoices first; held funds in the virtual Stripe account settle on closure (see Open invoices and the virtual Stripe holding account).
  2. Wait for in-flight Stripe payouts to settle. Stripe payouts authorized but not yet settled at the time of deactivation continue to settle to the contractor's Stripe Express account. Typical settlement is 1–3 business days; do not delete the contractor record until you confirm all expected payouts have landed.
  3. Deactivate the employee record. Navigate to Configuration > Employee, open the contractor's record, and set the active status to Inactive. The contractor cannot be assigned to new appointments, and new transactions cannot be split to their Stripe Express account.
  4. The contractor's Stripe Express account remains under the contractor's control. Zenoti does not own or close the contractor's Stripe Express account. The contractor retains access to their Stripe Express dashboard, tax forms, and any remaining balance independently.
  5. Settle any business-side reconciliation. If the contractor owed the host business a chair-rental fee, settle separately through your usual billing channel.

Edge cases

  • Pending refunds at deactivation. If a refund needs to be issued for a contractor service after the contractor is deactivated, the refund still flows from the contractor's Stripe Express account. If the contractor has withdrawn the funds and has no remaining balance, the host business absorbs the refund and recovers from the contractor separately.
  • Held funds in virtual holding. Funds in the virtual Stripe holding account on open invoices at deactivation time settle normally on invoice closure. Deactivation does not freeze open-invoice processing.

Tax reporting (1099s)

Stripe Express handles US tax reporting (1099-K or 1099-NEC) for contractors automatically.

Question Answer
Does Zenoti generate 1099 data? No. Stripe Express, as the merchant of record for the contractor's Stripe Express account, issues the contractor's 1099 directly.
Does the host business need to issue a 1099 to the contractor? Generally no, because payments are flowing through Stripe (a third-party network) β€” Stripe issues the 1099-K. Confirm with your accountant; rules vary by state and by transaction volume thresholds.
What does Stripe issue? 1099-K for payment-card transactions if the contractor crosses the IRS reporting threshold for the year. Some contractors may receive 1099-NEC instead for non-employee compensation; Stripe determines the form based on US tax law.
What about non-US contractors? Tax reporting outside the US is handled per the local jurisdiction's rules. Stripe Express supports tax-form delivery in supported countries; consult Stripe's region-specific documentation and your tax advisor.

Note. Tax compliance is the contractor's and host business's responsibility. The information above reflects general practice; specific tax obligations depend on jurisdiction, transaction volume, and the structure of the contractor relationship. Consult a qualified accountant for specific tax advice.


Reports for contractor reconciliation

Two reports cover the operational visibility for contractor payments.

Report What it shows Audience
Multi-mid transfers report Per-transaction split detail β€” which contractor received which portion of which invoice, processing fees, settlement dates. The primary reconciliation report for contractor operations. Host business administrator
Process payment refunds workflow report Per-refund detail showing which contractor was debited for refunds. Host business administrator

Contractors do not see these reports β€” they reconcile against their Stripe Express dashboard.

For accounting integration, the host business's standard accounting export (NetSuite, QuickBooks, etc.) reflects only the host business's portion of revenue (employee services, products, etc.). Contractor-portion revenue does not appear in the host business's books because the funds settle to the contractor, not the host business.


Was this article helpful?
Your feedback helps us improve our documentation.