Card Reader Setup (Consolidated Onboarding)
Card reader discovery, pairing, and configuration are part of the Set up Zenoti Payments for your business onboarding flow. This article explains how to complete card reader setup as a sequential step within that flow, so you can pair and verify your devices without navigating to a separate screen.
Note: For conceptual background on Zenoti Payments and the full onboarding sequence, see Payments Overview.
Audience: Organization administrators completing initial Zenoti Payments configuration.
Before you begin
- Your organization must have an active payment processor configured. For payment processor setup (Adyen, Stripe, and others), see the Integrations category.
- You must have completed the preceding steps in the Set up Zenoti Payments for your business onboarding flow before reaching the card reader step.
- Card readers must be physically connected to your network or device before you begin pairing.
Permission: You need administrator access to the Set up Zenoti Payments for your business onboarding flow to complete card reader configuration.
Steps
Open the Zenoti Payments onboarding flow
- Navigate to Configuration > Payments.
- Select Payment processor onboarding.
- The Set up Zenoti Payments for your business onboarding flow opens. If you have already completed earlier steps, the flow resumes at your current position in the sequence.
Note: Card reader setup appears as a dedicated step within this multi-step flow. You do not need to navigate to a separate card reader management screen.
Discover and pair your card reader
- In the onboarding flow, proceed to the card reader setup step.
- The system scans for available card readers on your network or connected via Bluetooth.
- When your device appears in the list, select it to begin pairing.
- Follow the on-screen prompts to complete the pairing process.
Important: Ensure your card reader is powered on and connected to the same network as your Zenoti workstation before starting discovery. A reader that is offline or on a different network segment will not appear in the discovery list.
Verify card reader status
- After pairing, the onboarding flow displays the status of your card reader.
- Confirm the status shows as connected and ready before proceeding.
- If the reader does not appear as connected, see the Troubleshooting section below.
Remove a card reader
- In the onboarding flow, locate the card reader you want to remove in the list of paired devices.
- Select the option to remove the reader.
- Confirm the removal when prompted.
Important: Removing a card reader from the onboarding flow unpairs it from your center. Guests will not be able to use that reader for payments until it is re-paired.
Worked example: A center manager at a three-chair salon is setting up Zenoti Payments for the first time. She opens Configuration > Payments > Process payments > Payment processor onboarding and steps through the onboarding flow. When she reaches the card reader step, she powers on the Verifone P400 Plus at the front desk. The system discovers it automatically and she selects it to pair. After pairing, the status shows as connected. She then powers on a second reader at the retail counter, discovers it, and pairs it in the same step. Both readers are now ready for use without her having navigated away from the onboarding flow.
Tips
- Complete all preceding steps in the onboarding flow before reaching card reader setup. The flow is sequential, and earlier steps (such as bank account linking and processor configuration) must be finished first.
- If you manage multiple centers, repeat the onboarding flow for each center. Card reader pairing is center-scoped.
- Keep card readers powered on and connected to the network during the discovery scan. Readers that power down mid-scan will not appear in the list.
- After completing the onboarding flow, verify that each paired reader appears as active in your center's terminal list before processing a live transaction.
Troubleshooting
| Symptom | Likely cause | Resolution |
|---|---|---|
| Card reader does not appear during discovery | Reader is offline, on a different network segment, or not yet powered on | Power on the reader and confirm it is on the same network as your workstation, then restart the discovery scan |
| Pairing completes but status does not show as connected | Network interruption during pairing, or reader firmware needs updating | Remove the reader, power cycle it, and re-pair; if the issue persists, check with your network administrator and refer to the reader's vendor documentation for firmware update steps |
| Reader was removed accidentally | Removal was confirmed in the onboarding flow | Re-pair the reader by returning to the card reader step in the onboarding flow and running discovery again |