ZenotiHelp

Payment onboarding ui

ZTZenoti Docs Team Updated September 17, 2026 7 min readGuide

Complete the payment processor onboarding process using Zenoti's multi-step wizard interface. The wizard guides you through business details, center selection, payment method configuration, bank account setup, compliance verification, and final submission.


On this page


Before you begin

Permission: Configure Payment Settings (under Payments) β€” Required to configure payment processor onboarding. Manage Payment Settings (under Payments) also opens this page.

  • Your organization must be located in a country where the selected payment processor is available.
  • Gather your business details, bank account information, and compliance documents before starting.

Access the onboarding wizard

  1. Go to Configuration > Payments > Process payments > Payment processor onboarding.
  2. Click Add New Processor or select an existing processor to continue onboarding.
  3. Select your payment processor from the available options.

The system loads a processor-specific onboarding wizard with steps tailored to the selected processor's requirements.

Before associating centers

If any centers you plan to onboard are already linked to a different legal entity or merchant account, you must delink them first. A center linked to an existing legal entity cannot be associated with a new entity until the prior association is removed. Contact Zenoti Support if you need assistance delinking a center.

Complete business details

  1. In the Business Details step, enter:
  • Legal business name β€” Your organization's registered legal name.
  • Entity type β€” Your business structure (LLC, Corporation, Partnership, etc.). See Sole Proprietorship and Trust entity types if you are onboarding as one of these entity types.
  • Business address β€” Your primary business address.
  • Tax identification number β€” Your EIN or other tax ID.
  • Business website β€” Your Webstore URL or social media profile page is acceptable.
  1. Click Next to proceed.

Configure center locations

  1. In the Locations step, select which centers will use this payment processor.
  2. Check the box next to each center you want to enable for payment processing.
  3. Click Next.

Set up payment methods

  1. In the Payment Methods step, select which payment types to accept:
  • Credit cards β€” Choose supported card brands (Visa, Mastercard, American Express, Discover).
  • ACH (Automated Clearing House) payments β€” Enable bank account payments if supported by your processor.
  • Digital wallets β€” Select Apple Pay, Google Pay, or other digital payment options.
  1. Configure any method-specific settings as required by your processor.
  2. Click Next.

Configure payment rates

  1. In the Rates step, review the pre-filled processing rates for each payment method.
  2. Adjust rates if you have negotiated custom pricing with your processor.
  3. Set up any additional fees or surcharges as needed.
  4. Click Next.

You can add your bank account details using manual entry or β€” for Adyen β€” automatic bank verification.

Manual entry:

  1. In the Bank Account step, provide your settlement account details:
  • Bank name
  • Routing number
  • Account number
  • Account type (checking or savings)
  1. Verify the information is correct.
  2. Click Next.

Automatic bank verification (Adyen only):

  1. Select Automatic Bank Verification in the bank account step.
  2. Select your bank from the list of supported institutions.
  3. Enter your online banking credentials.
  4. Provide any additional information required by your bank (such as a one-time password).
  5. Select the bank account you want to use for payouts.
  6. Complete the authentication. After successful verification, the bank name appears as read-only.

Note: Automatic Bank Verification is available for a limited set of banks supported by Adyen. If your bank is not listed, use manual entry instead.

Complete PCI DSS (Payment Card Industry Data Security Standard) questionnaire (Adyen)

For Adyen onboarding, you must complete the PCI DSS Self-Assessment Questionnaire (SAQ):

  1. In the PCI DSS Questionnaire step, review the questionnaire items.
  2. Verify or select the Signatory's name from the Accepted by dropdown.
  3. Click Accept & Continue to complete the PCI DSS acknowledgment.

Note: The PCI DSS Self-Assessment Questionnaire allows businesses to self-assess their compliance with PCI DSS requirements. Most compliance is managed by Zenoti on your behalf.

Add decision makers (Adyen)

For Adyen onboarding, you must add one or more decision makers β€” individuals who have legal authority over the business. Decision makers are required for KYC verification.

Role Who qualifies
Controller A person who makes major business decisions (typically a C-level executive or managing director).
Owner An individual who owns 25% or more of the business. If no individual owns more than 25%, provide the person who exercises equivalent control.
Signatory The individual legally authorized to sign the processor agreement and the PCI DSS SAQ on behalf of the business.
Director Used for businesses in India; the person must provide their Director Identification Number (DIN).

One decision maker can hold multiple roles simultaneously (for example, a sole owner who is also the authorized signatory). Add one person with all applicable roles rather than adding separate entries.

Complete compliance and KYC (Know Your Customer) verification

  1. In the Compliance step, upload required documents:
  • Business license
  • Bank statement
  • Identity verification β€” Government-issued ID for business owners.
  • Additional documents β€” Any processor-specific requirements.
  1. Accept the terms and conditions for your selected processor.
  2. For Adyen: Accept the Adyen Service Agreement β€” this is a separate agreement from the PCI DSS SAQ and also requires a signatory selection. Both must be completed before submission.
  3. Complete any additional KYC (Know Your Customer) requirements.
  4. Click Next to review your onboarding details.

For a reference table of required data formats and Decision Maker role combinations per country, see Country-specific onboarding requirements.

Review and submit

  1. In the Review step, verify all entered information is accurate.
  2. Click Edit next to any section to make corrections.
  3. Click Submit Onboarding when all details are confirmed.

The system submits your application to the payment processor and displays the current status.

Monitor onboarding status

Return to the payment processor setup page to view onboarding progress. The Status column shows:

  • Pending β€” Application submitted, awaiting processor review.
  • Processing β€” Processor is reviewing your application.
  • Completed β€” Onboarding approved, processor is active.
  • Rejected β€” Application denied; review feedback and resubmit.

Note: Some processors require external onboarding through their hosted platforms. The system opens a secure window to complete these steps and automatically returns you to Zenoti when finished.

Tip: If you need to pause the process, you can return to the onboarding page and continue from where you left off.

After KYC approval β€” complete center configurations

Once KYC verification is approved, complete the center-level configuration for each center associated with this processor. These steps make the center payment-ready.

  1. Go to Configuration > Payments > Process payments > Payment processor onboarding and open the center's configuration (View center configurations).
  2. Enter or confirm the following fields in Store Details:
  • Phone number β€” The center's contact phone number displayed on payment receipts.
  • Payout descriptor β€” The text that appears on your bank statement when payouts are deposited. Set this to a recognizable name to simplify bank reconciliation.
  • Statement descriptor β€” The text that appears on your guest's card statement for charges from this center.
  1. In Bank Account, confirm the bank account is mapped correctly to this center.
  2. In Payment Methods, review the enabled payment methods. All supported payment methods are enabled by default after onboarding. Disable any methods that should not be available at this center.
  3. Click Save.

Repeat for each center under this processor. After center configurations are complete, the center can accept live transactions.

Tip. Perform a test transaction after center configuration to confirm that payments process correctly and that the T+2 bank credit appears as expected. Use a real card for a small amount (for example, $1.00), then immediately issue a refund.

Stripe Connect onboarding

When you select Stripe as your payment processor, the onboarding wizard redirects you to Stripe's hosted onboarding portal (Stripe Connect OAuth) to complete business verification.

What to expect

When you reach the processor-specific step:

  1. The wizard displays a Continue with Stripe button.
  2. Click Continue with Stripe β€” a Stripe-hosted page opens in a new window or tab.
  3. On the Stripe page, complete:
    • Business details (legal name, business type, EIN/tax ID)
    • Business address and contact information
    • Bank account for settlements (routing and account numbers)
    • Identity verification for the business owner or authorized representative (government-issued ID, date of birth, last 4 digits of SSN in the US)
  4. After completing all Stripe steps, Stripe redirects you back to Zenoti automatically.
  5. The onboarding wizard confirms the Stripe connection and marks the step complete.

Note: If the Stripe window closes before completion, return to the onboarding wizard and click Continue with Stripe again to resume where you left off.

Stripe Express vs Stripe Connect

Zenoti uses two Stripe integration types depending on your business model:

Type Used for Settlement
Stripe Connect Express Individual service providers, contractors, or sub-merchants with their own Stripe account Funds settle directly to the provider's bank account
Stripe Connect Standard merchant onboarding Funds settle to your organization's bank account

Your Zenoti representative configures which Stripe integration type applies to your account. Most businesses use Stripe Connect.

Test mode in Stripe

After completing onboarding, Stripe provides a test mode environment. Use test mode to run a test transaction before going live β€” see Perform a test transaction for the walkthrough.

Note: Test mode uses Stripe's test card numbers (for example, 4242 4242 4242 4242 with any future expiry). Do not use real guest card details for test transactions.

Was this article helpful?
Your feedback helps us improve our documentation.