ZenotiHelp

Attendance check-in / check-out

ZTZenoti Docs Team Updated August 9, 2026 7 min readGuide

Zenoti Biometrics is a standalone Windows desktop application that records employee attendance using fingerprint scanning. When an employee places their finger on the scanner, the system identifies them, determines whether to record a check-in or check-out, and writes the event to Zenoti Cloud β€” all without requiring any manual input from employee or manager.

Audience: Center managers and front desk staff who operate the Zenoti Biometrics desktop application for daily employee attendance tracking.


On this page


Before you begin

  • The Zenoti Biometrics desktop application must be installed and configured on a Windows computer at the center.
  • The fingerprint scanner must be connected and recognized by the application. The Scanner Status indicator in the application must show Scanner Active before attendance mode can be started.
  • Biometric attendance must be enabled at both the organization level (Use a biometric device for employee attendance) and the center level (Use a biometric device for employee attendance). The center-level Specify the type of authentication you want to use setting must be set to Zenoti Biometrics. These settings are at Configuration > Employee > Employee attendance.
  • Each employee who will use fingerprint check-in must have an active fingerprint enrollment in the application. Employees with Access Revoked status cannot check in until access is restored. See Fingerprint enrollment for enrollment steps.
  • The computer running the application must have network connectivity to Zenoti Cloud. If connectivity is unavailable at the moment of a scan, the event cannot be recorded.

Permission: You need an active Zenoti employee account with center access to log in to the Zenoti Biometrics application and operate attendance mode.


Steps

Start attendance mode

  1. Open the Zenoti Biometrics application on the Windows computer at the center.

  2. Sign in using your Username and Password, then select your center from the Select Your Center screen.

  3. On the main dashboard, verify that the Scanner Status shows Scanner Active. If the scanner is not active, connect the fingerprint scanner and wait for the status to update before proceeding.

    Important: If no employees with active biometric access are enrolled at this center, the application will display "Cannot start attendance mode as no employees with active access" and attendance mode cannot be started. Enroll at least one employee before proceeding.

  4. Click Check In to start attendance mode.

    The screen transitions to the attendance scanning view and shows that it is ready and waiting for a fingerprint scan.

    Note: While attendance mode is active, the application keeps the computer's display on and prevents the computer from going to sleep, so scans are not interrupted. This behavior is controlled by the Prevent sleep during attendance mode and Keep display on settings in Settings > Biometric Device Settings > Power Management.

  5. The application is now ready to receive fingerprint scans. Employees can begin checking in and out.

    Tip: The X button minimizes the application to the system tray instead of closing it. If attendance mode is on, check-ins and check-outs will continue to be recorded in the background.


Record a check-in or check-out via fingerprint scan

This procedure is performed by the employee at the scanner. No manager action is required.

  1. The employee places their finger on the fingerprint scanner.
  2. The screen shows that the scan is being processed, then that the system is identifying the employee.
  3. The system matches the scan against all enrolled fingerprints for the center.
  4. If the employee is recognized, the system automatically determines whether to record a check-in or a check-out based on the employee's current attendance status (see How the system determines check-in vs. check-out below).
  5. The system records the event using the local time of the center and writes it to Zenoti Cloud.
  6. The screen displays a confirmation identifying the employee's name and the action recorded β€” either Checked In Successfully! or Checked Out Successfully!
  7. The screen returns to its ready state, waiting for the next fingerprint scan.

Important: If the fingerprint is not recognized, the system displays a not-recognized message and does not record any attendance event. The employee should try again, ensuring their finger is placed flat and centered on the scanner surface. If repeated attempts fail, the employee's manager can record attendance manually from Employee > Check in in Zenoti.

Important: If Zenoti Cloud is unreachable at the moment of the scan, the event cannot be recorded and the system displays a connectivity error. Attendance events are not queued for later submission β€” the employee must scan again once connectivity is restored, or a manager must add the attendance record manually.


Stop attendance mode

  1. On the attendance scanning screen, click Check Out to stop attendance mode.

    Note: Stopping attendance mode does not affect any attendance records already written. All events recorded during the session remain in Zenoti.

  2. The application returns to the main dashboard.


How the system determines check-in vs. check-out

The system uses the employee's current attendance status to decide which action to record:

Employee's current status Action recorded
Not checked in (no open attendance record for today) Check-in
Currently checked in (open attendance record exists) Check-out

The employee does not select the action β€” the system determines it automatically. This means:

  • An employee who scans in the morning is checked in.
  • The same employee who scans again later in the day is checked out.
  • If the organization allows multiple check-ins (configured via Allow multiple check ins in employee attendance settings), a subsequent scan after a check-out creates a new check-in record.

Attendance events recorded through fingerprint scanning are written to the same underlying attendance records used by all other check-in methods (manual entry, self-service, and browser-based). Reports reflect a single, unified attendance history regardless of which method was used.

Worked example: Emma arrives at 9:02 AM and places her finger on the scanner. She has no open attendance record for today, so the system records a check-in at 9:02 AM (center local time) and displays "Checked In Successfully!" Emma leaves at 5:47 PM and scans again. The system finds her open check-in record and records a check-out at 5:47 PM, displaying "Checked Out Successfully!" Both events appear in the Attendance report under Emma's name for that date.


Tips

  • Keep the scanner surface clean. Dust, moisture, or residue on the scanner reduces recognition accuracy. Wipe the scanner surface regularly with a dry, lint-free cloth.
  • Vary finger placement during enrollment. Employees who enrolled with varied finger angles and placements (flat, slightly rotated) are recognized more reliably during daily scanning. If an employee is frequently not recognized, consider re-enrolling their fingerprint.
  • Use the system tray to keep attendance mode running. Minimizing the application to the tray (rather than closing it) keeps attendance mode active in the background. Employees can continue scanning even when the main window is not visible.
  • Review the Recent Activity log after each shift. The Recent Activity screen in the application shows a timestamped log of all check-in and check-out events. Use this to verify that all expected scans were recorded before the end of the day.
  • Adjust match accuracy if employees are frequently rejected. If valid employees are being rejected, a manager can lower the Match accuracy level slider in Settings > Biometric Device Settings. The recommended range is 70%–80%. Lowering the value makes matching more lenient; raising it makes matching stricter.

Troubleshooting

  • The scanner shows "Scanner Disconnected" and attendance mode cannot be started. Verify that the fingerprint scanner is physically connected to the computer via USB. Disconnect and reconnect the cable, then wait up to 10 seconds for the application to detect the device. If the status does not change to Scanner Active, check that no other application is using the scanner port, and restart the Zenoti Biometrics application.
  • An employee places their finger on the scanner but is not recognized. The scan may not have matched any enrolled fingerprint above the configured accuracy threshold. Ask the employee to wipe their finger dry and place it flat and centered on the scanner surface, then try two or three times, varying the angle slightly between attempts. If the employee is consistently not recognized, check their enrollment status in Employee Management. If their status shows Access Revoked, restore access before they can scan. If their status shows Not Enrolled, enroll their fingerprint. If they are enrolled and access is active, consider re-enrolling with more varied finger placements, or lower the Match accuracy level slightly in Settings > Biometric Device Settings.
  • A check-in or check-out event was not recorded after a successful scan. If the application displayed a connectivity error at the time of the scan, the event was not written to Zenoti Cloud. Attendance events are not queued β€” they must be recorded at the time of the scan. A manager should add the missing attendance record manually from Employee > Check in in Zenoti. Verify that the computer has a stable network connection before resuming attendance mode.
  • The computer screen turned off while attendance mode was active. Verify that Prevent sleep during attendance mode and Keep display on are both enabled in Settings > Biometric Device Settings > Power Management. These settings only apply while attendance mode is running. If the screen turned off despite these settings being enabled, check the Windows power plan settings β€” some system-level policies can override application-level wake locks.
  • An employee was checked out instead of checked in (or vice versa). The system determines the action based on whether an open attendance record exists for the employee on that day. If the wrong action was recorded, a manager can correct the attendance record from Employee > Check in in Zenoti. This may occur if a previous check-out was not recorded (leaving an open record) or if a previous check-in was recorded in error.

Was this article helpful?
Your feedback helps us improve our documentation.