ZenotiHelp

Password expiry and change password flow

ZTZenoti Docs Team Updated November 11, 2026 8 min readGuide

When your Zenoti password expires, the system redirects you to the Change Password page before you can access the product. This article explains how that redirect works, what you need to complete the change, and how to respond to pre-expiry reminders.

Audience: Employees who receive a password expiry notice at sign-in.


On this page


Before you begin

  • Your password expires after the number of days set by your organization's administrator at Configuration > Security > Password rules. If your organization has not set an expiry period, passwords expire after 90 days. Password expiry cannot be turned off. This is an organization-level setting β€” a single expiry period applies to every employee across all centers. There are no center-level overrides for the expiry period.
  • You need your current (expired) password to complete the change. If you do not remember it, select Forgot password on the sign-in page instead and follow the steps to reset your password.
  • Password rules are defined at the organization level. There are no center-level overrides for the expiry period.

How password expiry works

Zenoti evaluates your password's age only after your sign-in credentials are validated. The system compares the date your password was last updated plus the organization's configured expiry period against the current UTC time. If that calculation shows the password has expired, the sign-in does not complete.

Important: Expiry is checked after credentials are accepted. You will not see an invalid-credentials message when your password has expired β€” you will see the expiry notice. This confirms your username and password combination is correct. You are not signed in; instead, you land on the Change Password page rather than the application home screen.

Interaction with two-factor authentication (2FA) and new-device verification: Expired-password handling takes precedence over both. If your password has expired, you are redirected to the Change Password page immediately. You are not asked for a 2FA or new-device verification code during the expired-password change β€” you change the password first, and any 2FA or new-device verification steps apply normally on the next sign-in with your new password.


Steps

Update an expired password

  1. At the Zenoti sign-in page, enter your username and your expired password, then select Sign In. If you do not remember your current password, select Forgot password instead.

  2. Zenoti validates your credentials. Because your password has expired, sign-in does not complete. The Change Password page opens with the following message displayed above the form:

    Your password has been expired, Please update to the new password to continue

  3. On the Change Password page, complete all four fields:

    • UserName β€” Filled in for you with your own username. Do not change it or select another person's saved login.
    • Current (expired) password β€” Enter the password you used to sign in.
    • New Password β€” Enter the new password you want to use.
    • Confirm Password β€” Re-enter your new password exactly.

    Each password field has a show/hide control. Select it to toggle the value visible if you want to verify what you have typed.

  4. As you type in the New Password field, review the live requirements checklist headed "Password must meet the following requirements:". Each rule your administrator has enabled updates its indicator as you type. Rules that may appear include:

    • Minimum length
    • Maximum length
    • At least one number (0-9)
    • At least one lowercase letter (a-z)
    • At least one uppercase letter (A-Z)
    • At least one special character (# % $..etc)

    Only the rules your organization has enabled are shown. A rule indicator updates to show it is satisfied as your new password meets it.

  5. When all displayed requirements are satisfied and both password fields match, select the button to submit the change. The button can be selected only after every listed requirement is met. If a requirement is not met, or New Password and Confirm Password do not match, the checklist shows it and the button stays disabled.

  6. After a successful change, you are returned to the sign-in page. Sign in with your new password. Any 2FA or new-device verification steps that apply to your account run at this sign-in.


Password requirements checklist

The checklist on the Change Password page reflects exactly the rules your organization has turned on in Configuration > Security > Password rules. Rules not enabled by your organization do not appear in the checklist. The list updates live as you type, so you can see which requirements are still unmet before submitting.

Possible rule Description
Minimum length New password must be at least the configured number of characters.
Maximum length New password must not exceed the configured number of characters.
At least one number (0-9) New password must contain a digit.
At least one lowercase letter (a-z) New password must contain a lowercase letter.
At least one uppercase letter (A-Z) New password must contain an uppercase letter.
At least one special character (# % $..etc) New password must contain a special character from the allowed set.

Error messages and what they mean

The table below lists every validation message the Change Password page can display, with the action required.

Message Cause What to do
Your password has been expired, Please update to the new password to continue Your password has passed the organization's expiry period. Follow the steps above to set a new password.
Password should not include username in it. Your new password contains your username as a substring. Choose a password that does not include your username.
Password matches with one of the previous 5 passwords. Please enter a new password. Your new password is the same as one of your five most recently used passwords. Choose a password you have not used in your last five changes.
You have entered a common password that is easy to guess. Please try with a different password. The password appears on a list of commonly used or leaked passwords that Zenoti blocks for every organization. Choose a less predictable password.

Note: You must know your current password to complete the Change Password form. If you do not remember it, select Forgot password on the sign-in page and follow the steps. Your new password must meet the same requirements, including the last-five-passwords rule, and your expiry countdown restarts from the date of the reset. If no email address or phone number is linked to your account, contact your Zenoti administrator to add them.


Responding to a pre-expiry reminder

By default, Zenoti reminds you 5 days before your password expires. This reminder period cannot be changed.

When the reminder triggers, the number of days remaining is displayed to you at sign-in. This is a prompt to change your password voluntarily before it expires, so you can avoid an interruption in sign-in flow.

Note: Password expiry cannot be turned off, and the 5-day reminder period cannot be changed.

To change your password proactively before it expires:

  1. After signing in, navigate to your employee profile.
  2. Select Update Password and follow the same form described in Update an expired password above. The same requirements checklist and validation messages apply.

Tips

  • Keep your expired password handy. The Change Password page requires all four fields β€” including your current expired password. If you do not know it, select Forgot password on the sign-in page instead.
  • Use the show/hide toggle. Each password field has a show/hide control. Toggle the field visible while typing to avoid typos, especially for the Confirm Password field.
  • Change your password before it expires. When you see the pre-expiry reminder at sign-in, navigate to your profile and select Update Password. Doing this prevents the redirect to the Change Password page and any interruption to sign-in that includes 2FA or new-device verification.
  • Pick a unique password. The five most recent passwords are blocked. Plan your new password in advance so you do not reuse a recent one.
  • Avoid common passwords. Zenoti blocks commonly used and leaked passwords for every organization. Passwords like dictionary words, keyboard patterns, or simple sequences are likely to be rejected.

Troubleshooting

Problem: You see the message "Your password has been expired, Please update to the new password to continue" but you believe your password should still be valid.

Resolution: Password expiry is calculated against UTC time, not local time. If your organization's configured expiry period ended even moments before your sign-in in UTC, the redirect applies. Contact your administrator to verify the configured expiry period in Configuration > Security > Password rules and confirm when your password was last updated.


Problem: You are stuck on the Change Password page because you have forgotten your expired password.

Resolution: The Change Password page requires your current expired password. Go back to the sign-in page, select Forgot password, and follow the steps to reset your password. Your new password must meet the same requirements, and your expiry countdown restarts from the date of the reset. If no email address or phone number is linked to your account, contact your Zenoti administrator to add them.


Problem: Every new password you try is rejected with "Password matches with one of the previous 5 passwords. Please enter a new password."

Resolution: Zenoti tracks your five most recent passwords. You must choose a password you have not used in your last five changes. If you are running out of options, construct a new password using a different base phrase or add characters that make it distinct from previous versions.


Problem: You completed the password change successfully but your 2FA prompt did not appear as expected.

Resolution: When your password expires, the 2FA and new-device verification steps are deferred β€” they do not run during the Change Password flow. They run on the next sign-in with your new password. Sign in again with your new password, and 2FA or new-device verification will appear as normal.


Problem: You see the reminder about an expiring password at sign-in but do not know where to change it proactively.

Resolution: After signing in, go to your employee profile and select Update Password. This opens the same change password form described in this article, without requiring you to wait for the redirect.


Was this article helpful?
Your feedback helps us improve our documentation.