ZenotiHelp

Configure attendance thresholds

ZTZenoti Docs Team Updated September 19, 2026 9 min readHow-to

Attendance thresholds define the rules for classifying check-ins as on-time, early, or late, and control early check-in blocking behavior. These settings are configured at the organization and center level through attendance settings. This article covers threshold configuration, early check-in blocking, and related attendance settings.

Note: Attendance thresholds are a distinct feature from attendance rules. Thresholds classify check-ins as early, on-time, or late relative to the schedule and affect the Attendance report. Attendance rules apply leave deductions or adjustments based on working day duration, early checkout, or late check-in. See Configure attendance rules for the separate rules configuration.


On this page


Before you begin

  • Attendance tracking (employee check-in) must be enabled for your organization.
  • Attendance thresholds are configured at the organization and center level, not at the employee level.

Permission: Edit (on the organization or center settings) β€” required to modify attendance threshold configuration.

Attendance threshold rules

The Attendance threshold rules section controls how Zenoti classifies employee check-ins as early, on-time, or late relative to their scheduled shift start time. These thresholds apply only to the Attendance report. This setting doesn't change the visual indicators you see on the Appointment Book.

Enable and configure thresholds

  1. Navigate to Configuration > Employee > Employee attendance > Attendance threshold rules.

  2. Locate the Attendance threshold rules section.

  3. Select Enable attendance threshold rules to activate threshold tracking for your organization.

  4. Configure the following fields:

    Field Description
    Early check-in limit (minutes before scheduled start time) The number of minutes before the scheduled shift start at which a check-in is flagged as "early." For example, entering 10 means a check-in more than 10 minutes before the shift start is classified as early.
    Late check-in limit (minutes after scheduled start time) The number of minutes after the scheduled shift start at which a check-in is flagged as "late." For example, entering 15 means a check-in more than 15 minutes after the shift start is classified as late.
  5. Click Save.

Check-ins within the window between the early and late thresholds are classified as on-time. Check-ins outside this range are flagged in the Attendance report and affect punctuality metrics.

Important: These thresholds apply only to the Attendance report. They do not change the visual indicators displayed on the Appointment Book.

Worked example

A center configures an early check-in limit of 10 minutes and a late check-in limit of 15 minutes for a shift scheduled at 9:00 AM:

  • Check-in at 8:45 AM or earlier β†’ classified as Early
  • Check-in between 8:50 AM and 9:15 AM β†’ classified as On Time
  • Check-in at 9:16 AM or later β†’ classified as Late

Center-level threshold override

By default, centers inherit the organization-level threshold values. To configure center-specific thresholds:

  1. Navigate to Configuration > Employee > Employee attendance > Attendance threshold rules at the center level.
  2. Under Attendance threshold rules, select Override at center level.
  3. Enter center-specific values for Early check-in limit (minutes before scheduled start time) and Late check-in limit (minutes after scheduled start time).
  4. Click Save.

To disable attendance threshold tracking entirely for a specific center, select Disable attendance threshold rules for this center. When this option is active, threshold tracking is turned off for that center regardless of the organization-level setting.

Early check-in blocking

When the Block employees from checking in early setting is active, employees cannot check in before their scheduled shift start time. A configurable buffer allows check-in within a defined window before the shift:

Setting Description
Block employees from checking in early Organization-level master toggle for early check-in blocking
Specify (in minutes) how early can an employee check in ahead of the scheduled time. The number of minutes before the scheduled start time during which check-in is permitted (for example, 15 minutes). An employee can check in up to 120 minutes before the scheduled time.

When an employee attempts to check in outside the allowed window, the system displays a message indicating that check-in is not yet available.

Center-level overrides

Centers can override the organization-level early check-in blocking behavior:

Setting Description
Block employees from checking in early? Center-level control for early check-in blocking. Options are Do not block employee from early check in (inherits organization default) or Override organization setting to block employee early check in (applies a center-specific buffer).
Specify (in minutes) how early can an employee check in ahead of the scheduled time. When the center override is active, this value takes precedence over the organization-level buffer.

This allows different centers to have different early check-in policies based on their operational needs.

Work tasks at check-in

When the Enable work tasks organization setting is enabled, the system can prompt employees to select a work task during check-in. An additional sub-setting controls who can assign work tasks:

Setting Description
Enable work tasks Master toggle β€” enables work task assignment at check-in organization-wide
Enable Primary Work Task When enabled, the employee's pre-configured primary work task is auto-assigned if no manual selection is made
Work task entry β€” Only manager Only managers can assign or change the work task at check-in; employees see the field as read-only
Work task entry β€” Allow both Both managers and employees can select or change the work task at check-in

To configure:

  1. Navigate to Configuration > Employee.
  2. Enable Enable work tasks.
  3. Set the work task entry permission to Only manager or Allow both based on your operational policy.
  4. Optionally enable Enable Primary Work Task to auto-assign default tasks.
  5. Click Save.

Manual mandatory-break mode

Manual mandatory-break mode allows you to enforce a required break period during a shift and, optionally, prevent employees from checking in again until that break is complete. This is a labor-compliance control separate from automatic break deduction β€” it does not deduct time from payroll automatically, but it can block early return from a break.

Distinguish from early check-in blocking. Early check-in blocking (in the Early check-in blocking section above) prevents an employee from checking in before their scheduled shift start. Manual mandatory-break mode blocks an employee from checking back in during a mandatory break period mid-shift. They are different controls with different purposes.

Settings for manual mandatory-break mode

These settings are configured at the center level:

Setting What it controls
Mandatory break duration (per employee) The minimum break length, in minutes, required per day. Set per employee on their profile (not a center-wide default). An employee whose mandatory break time is 0 or unset is not subject to break enforcement.
Allow check-in during mandatory break When set to No, the system blocks the employee from checking in (or clocking back in after a break checkout) until the mandatory break duration has elapsed. When set to Yes (or left at default), the employee can return early and the break is tracked informally. This is the primary enforcement lever.
Break label A custom display name for the break type shown to employees during check-in/out (for example, "Lunch Break," "Meal Period," or "Rest Break"). This setting is cosmetic and does not affect enforcement.

How it works

  1. The employee checks out for a break (using the "Consider this checkout for meal break" checkbox during check-out, or the break-checkout flow).
  2. The system records the break start time.
  3. If Allow check-in during mandatory break is set to No and the employee's mandatory break duration has not elapsed, any attempt to check back in is blocked.
  4. Once the mandatory break duration is met, the employee can check in normally.

Note: The mandatory break duration is set per employee, not per center. An employee with no mandatory break time configured is not blocked from checking in early, regardless of the center's Allow check-in during mandatory break setting.

Automatic break deduction

Automatic break deduction reduces an employee's total payroll hours by a configured duration when the shift exceeds a threshold. This avoids the need for managers to manually record meal breaks on qualifying shifts.

To configure:

  1. Navigate to the payroll or attendance settings for your organization.
  2. Enable the Automatic break deduction toggle.
  3. Set the Deduct value β€” the number of minutes to deduct per qualifying shift.
  4. Set the After value β€” the minimum shift duration (in hours) that triggers the deduction.

When enabled, the payroll report shows additional columns:

Column Description
Total hours excluding meal break The employee's worked hours after the automatic deduction
Automatic Indicates whether the deduction applied automatically
Meal break status Shows whether a break was recorded manually or deducted automatically

Note: Automatic break deduction and manually recorded break records are distinct. If a manager records a manual break via the attendance page, that break is tracked separately from the automatic deduction.

Configure missed attendance reasons

Missed attendance reasons provide an audit trail when employees or managers submit attendance records after the fact. To configure the available reasons:

  1. Navigate to Settings > Missed attendance reasons.

  2. Click Add to create a new reason.

  3. Fill in the fields:

    Field Description
    Name Display name for the reason (shown in the attendance submission form)
    Code Short unique identifier
    Description Optional detail about when this reason applies
    Active Toggle to enable or disable the reason from the selection list
  4. Click Save.

Configured reasons appear in the Reason dropdown when employees submit attendance requests from My Dashboard and when managers record missed check-ins from the attendance page.

Additional attendance settings

Setting Description
Allow Clock In/Out Without Schedule When enabled, employees can check in even without a published schedule for the day. When disabled, a published schedule is required before check-in is allowed.
Allow employees to request missed checkin When enabled, authorized users can retrospectively add check-in and check-out records for past dates
Bypass financial lock for check-in When enabled, managers can record or modify check-in records within financially locked periods
Restrict employee check in and check out to logged in user When enabled, only the logged-in employee can enter their own time records through the self-service interface
Waive authorization for employee check in When enabled, employees can check in without PIN, password, or biometric authentication

Employee settings are documented in the Configurations category. See Configure employee settings.

Tips

  • Set the late check-in threshold to match your organization's grace period policy. For example, if your policy allows employees up to 5 minutes before a check-in is considered late, set the late check-in limit to 5.
  • Use center-level overrides when different centers have different operational hours or staffing expectations. A high-volume center may need a tighter early check-in window than a smaller one.
  • If you enable Disable attendance threshold rules for this center, verify that the Attendance report for that center no longer shows early/late classifications before communicating the change to managers.

Troubleshooting

Employees are being flagged as late even though they arrived on time. Check the Late check-in limit (minutes after scheduled start time) value at both the organization level and the center level. If a center-level override is active, the center value takes precedence. Confirm the employee's scheduled shift start time is correctly published in the schedule.

The Appointment Book still shows the same color indicators after I changed the thresholds. This is expected behavior. Attendance thresholds apply only to the Attendance report. They do not change the visual indicators on the Appointment Book. The Appointment Book color coding is controlled by separate visual indicator settings.

A center's threshold settings are not taking effect. Verify that Override at center level is selected under Attendance threshold rules for that center. If Disable attendance threshold rules for this center is enabled, threshold tracking is turned off entirely for that center and no classifications will appear in the Attendance report.

Was this article helpful?
Your feedback helps us improve our documentation.