ZenotiHelp

Configure employee commissions

ZTZenoti Docs Team Updated October 27, 2026 21 min readHow-to

Zenoti supports two commission modes: per-employee flat or percentage rates (always available) and plan-based commission with revenue slabs (when commission plans are enabled). This article covers both approaches, including how to create commission plans, configure slabs, set per-employee rates, and understand how commissions are calculated.


On this page


Before you begin

  • Commission plans require the Enable Payroll Plans organization setting to be active. To enable this setting, see Configure employee settings.
  • Per-employee commission rates are available without any additional settings.
  • Commission plan settings are organization-level; per-employee commission rates override plan defaults.

Permission: Add (under Payroll Plan) β€” Required to create new commission plans. Grant it on the Payroll Plan row in the Employee Manager section of the security role (Configuration > Security > Security roles > the role > Permissions).

Permission: Edit (under Payroll Plan) β€” Required to modify existing commission plans and adjust invoice-level commission amounts. Grant it on the Payroll Plan row in the Employee Manager section of the security role (Configuration > Security > Security roles > the role > Permissions).

Permission: View (under Payroll Plan) β€” Required to see the Commission Plans listing page. Without this permission, the Payroll Plans menu item is not visible. Grant it on the Payroll Plan row in the Employee Manager section of the security role (Configuration > Security > Security roles > the role > Permissions).

Permission: Edit (under Commission Settings) β€” Required to set per-employee commission rates, scaling factors, and deductions on the employee profile. Grant it on the Commission Settings row in the Employee Manager section of the security role (Configuration > Security > Security roles > the role > Permissions).

Commission modes

Mode Description When to use
Per-employee rates Flat or percentage commission set directly on the employee profile Simple commission structures where each employee has a fixed rate
Plan-based commission Tiered slab-based commission using revenue ranges Organizations that want graduated commission tiers based on revenue performance

When both modes are configured for an employee, plan-based commission takes precedence for items covered by the plan. Per-employee rates apply to items not covered by any plan.

On top of these, the employee-wide Commission option can award an additional amount on service commission β€” either Flat value commission for each service or Additional percentage on service commission. Clearing the Commission check box means the employee earns no additional commission. This option is separate from the per-item commission entries below: it does not decide whether a per-item value is read as a percentage or as a flat amount.

How Zenoti reads a commission entry. In the Commission column of an employee's Services and Products tabs, the commission box on the Memberships and Packages tabs, and the same lists on a job, there is no separate percentage-or-flat selector. What you type decides it:

You enter Zenoti pays
10% 10 percent of the item's commissionable revenue
10 A flat 10 (your currency) for each unit of that item sold

The "%" must come last and appear only once. A value of 0 or a blank means "not set", so the job's value for that item applies instead. For a $100 service, 10% pays $10 and 10 also pays $10. For a $250 service, 10% pays $25 but 10 still pays $10. Check every entry for the "%" before saving.

After you change a commission setting. A change to a per-item commission entry, a job commission entry, a slab, a plan, or the employee-wide commission option does not change commission that has already been calculated for a pay period. Open the payroll report, select the Cycles, Month and Year for the pay period that contains the invoice's close date, and click Calculate commissions now. On a period whose commissions have already been calculated, the same button reads Recalculate commissions now. Repeat for each affected period. An invoice counts in the period in which it was closed, which can differ from the service or sale date. Past-period recalculation uses the current per-item commission values, and it is not available once the period is locked or payroll processing has started for that center.

Understanding the payroll report service-revenue column

Important: The service-revenue column in the payroll report is already net of shop cost. Deducting shop cost again from this figure double-counts it. The relationship is: revenue + shop cost = invoice total. Most reports of an unexpected commission figure trace back to this arithmetic. Verify this before investigating other causes, and before working through any of the examples below.

Set per-employee commission rates

Per-employee commission has three parts: a default rate for each category of item the employee sells, an optional employee-wide additional service commission, and per-item entries that override the category default for individual items.

Set the default commission for each category

  1. Open the employee profile.
  2. Select the Commissions tab.
  3. In the Defined Commissions by Category section, define the commission against each Category the employee earns on:
    • Services
    • Free Services
    • Products
    • Classes
    • Memberships
    • Packages
    • Giftcards
  4. Click Save.

Set the employee-wide commission option

The Commission option on the Commissions tab awards an additional amount on top of the service commission calculated above:

  • Flat value commission for each service β€” a fixed amount for each service the employee performs.
  • Additional percentage on service commission β€” an extra percentage on the employee's service commission.

Clear the Commission check box if the employee earns no additional commission.

Important: This option is employee-wide and applies only to the additional service commission. It does not set the percentage-or-flat mode of a per-item commission entry β€” a trailing "%" does that.

Set per-item commission entries

A per-item entry overrides the category default for one specific service, product, membership, or package.

  1. Open the employee profile.
  2. Select the tab for the item type: Services, Products, Memberships, or Packages.
  3. Enter the commission against the item β€” a value ending in "%" for a percentage of the item's commissionable revenue, or a bare number for a flat amount per unit sold.
  4. Click Save.

Leave an entry blank or set it to 0 to fall back to the job's value for that item. The same per-item entries exist on a job (Employee > Jobs) and are read the same way.

Create a commission plan

Note: Commission plans are only available when the Enable Payroll Plans organization setting is active.

  1. Navigate to Employee > Payroll Plans.
  2. Click Add.
  3. On the Create payroll plan page, select the plan type. The page displays: "Please pick a plan type below to create a plan."
  4. Enter the Plan Name * and Plan Code *. Both must be unique within the organization. If a duplicate name or code is entered, Zenoti displays a validation error and prevents saving.
  5. Set the effective date range for the plan. Only plans whose effective date range encompasses the current pay period are applied during commission calculation. Expired plans remain in the listing for historical reference but do not influence active commission calculations.
  6. Select the Consider Revenue from option appropriate for the plan type (see Revenue basis options).
  7. Configure commission slabs (see Configure commission slabs).
  8. Click Save.

Note: For conceptual background on commission plans, see Employee overview.

Note: Only three plan types exist: Service, Product, and Payrate. Memberships and packages do not have dedicated plan types.

Worked example: creating a service commission plan

A center wants to pay 10% commission on service revenue up to $2,000 per pay period, and 15% on revenue above $2,000. The administrator:

  1. Navigates to Employee > Payroll Plans and clicks Add.
  2. Selects Service as the plan type.
  3. Enters Plan Name *: "Service Tier Plan" and Plan Code *: "SVC-TIER-01".
  4. Sets the effective start date to the first day of the current month with no end date.
  5. Adds two slabs: $0–$2,000 at 10%, and $2,001–$999,999 at 15%.
  6. Saves the plan.

Configure commission slabs

Commission plans use revenue-based slabs to determine the commission rate. Each slab defines a revenue range and the corresponding commission rate applied within that range.

Revenue accumulates over the pay period. At the start of each new pay period, accumulated revenue resets to zero β€” revenue does not carry over across pay periods.

You can add an unlimited number of slabs per plan. Each slab row specifies:

  • From amount β€” the lower revenue boundary for the slab
  • To amount β€” the upper revenue boundary for the slab
  • Commission type β€” Percentage (%) or flat amount
  • Commission (%) or flat value β€” the rate or amount applied within this range

Both percentage and flat-amount slabs can exist within the same plan, enabling mixed commission structures where lower revenue brackets earn a flat amount and higher brackets earn a percentage.

Important: If a gap exists between slab ranges (for example, $0–$1,000 and $1,500–$2,000 with no slab covering $1,000–$1,500), revenue in the uncovered range does not generate slab-based commission.

When the Exclude Refunded Invoice Revenue From Slabs setting is active, revenue from refunded invoices is subtracted from the accumulated total before slab thresholds are evaluated. This prevents refunded revenue from inflating slab tier attainment.

Slab matching and deductions β€” which comes first:

The "Match commission slabs before deductions to calculate commissions" toggle controls the order in which slab thresholds are evaluated relative to deductions. See Commission deductions for the full explanation of this toggle.

Which slab model applies is an organization setting, not fixed product behavior. At Configuration > Employee > Payroll and commissions > Commissions, the Calculate employee commissions based on setting selects either Calculate using highest qualified commission level or by cumulative commission level. When Allow commission type for slabs to be defined at employee level is enabled, the model can be set for an individual employee instead of following the organization value. Work both of the models below against your own figures to confirm which one produced them.

Highest qualified model

The highest qualified model applies only the rate from the single matching slab. The system evaluates the employee's accumulated revenue, identifies the slab whose range contains that revenue amount, and applies that slab's commission rate to the entire qualifying revenue.

Example: An employee earns $2,500 in service revenue. Slabs are: $0–$1,000 at 10%, $1,001–$2,000 at 12%, $2,001–$5,000 at 15%. The highest qualified slab is the $2,001–$5,000 tier, so the full $2,500 is commissionable at 15%, yielding $375.

Cumulative model

The cumulative model applies incremental rates across all slabs. Revenue is distributed across slabs from lowest to highest, and each slab's rate applies only to the revenue within that slab's range. This results in a blended effective rate.

Example: Using the same slabs and $2,500 revenue: $1,000 Γ— 10% = $100, $1,000 Γ— 12% = $120, $500 Γ— 15% = $75. Total commission = $295.

Note: Slabs are versioned. For current and future pay period calculations performed after slab deletion, Zenoti uses only the active slabs defined at either the employee or job level. For past pay periods, Zenoti uses the commission slabs that were active in the respective pay period, even if those slabs have since been deleted.

Plan types

Plan type Description
Service Commission based on service revenue
Product Commission based on product sales revenue
Payrate Commission based on hourly pay rates

Commission plans associate with service categories, not individual services.

Revenue basis options

The Consider Revenue from option is configured independently per plan type:

Plan type Available options
Service Services; Products
Product Products; Products to Services Ratio
Payrate Services; Services and Products; Products

The revenue range itself can be calculated per production hour, per all hours, or set to none (Revenue range based on field).

The Commission Multiplier field applies an additional multiplier to the calculated commission amount.

Assign a commission plan to employees

After creating a plan with slabs, associate it with employees:

  1. Open the employee profile.
  2. Navigate to the Commissions tab.
  3. In the Choose pay plans for commission calculations section, select the plan type and then select the specific plan.
  4. Click Save.

When a commission plan is active and assigned to an employee, plan-level rates take precedence over the per-employee commission percentages for the applicable item types. The per-employee values are retained as fallback defaults.

Note: If a commission plan's effective date ends mid-pay-period and a new plan begins, Zenoti prorates commission using the old plan for invoices before the change date and the new plan for invoices after the change date.

Commission resolution hierarchy

When multiple commission configurations exist for the same item, Zenoti applies the following priority order (highest to lowest):

  1. Item-level flat commission override
  2. Item-level percentage commission override
  3. Employee tab-level commission
  4. Employee slab-level commission
  5. Job tab-level commission
  6. Job slab-level commission

Important: Item-level commission overrides are not versioned. If payroll is recalculated for a past period, Zenoti uses the latest item-level override value, not the value that was in effect at the time of the original calculation. Employee-level and job-level slab configurations are versioned and retain historical values for accurate retroactive payroll computation.

When a commission rule and a service assignment disagree, Zenoti displays a warning dialog. The dialog indicates which configuration takes effect. Review the dialog carefully before proceeding β€” the higher-priority configuration in the hierarchy above is the one that applies.

Service commission

Service commission is calculated when a provider completes a service appointment. The commission amount depends on:

  • The service revenue (based on the revenue basis setting)
  • The applicable commission rate (item-level override > employee-level > job-level > plan slab)
  • Whether commission is calculated on the pre-discount or post-discount amount
  • Any cancellation or no-show scaling factors

The income basis setting on the employee record controls whether commission is calculated on gross service revenue, net service revenue (after discounts), or the collected payment amount.

Service-level commission overrides β€” where a specific service has a custom rate different from the employee's default β€” take precedence over the employee-level default rate when computing commission for that specific service.

Product commission

Product commission is calculated at the point of sale when the employee is attributed a product sale. The same rate hierarchy applies: item-level override > employee-level > job-level > plan slab.

Product commission rates can be configured differently from service commission rates for the same employee. For example, an employee might earn 15% on services but 5% on products.

When a guest returns a product, no commission deduction is applied to the selling employee.

Membership and package commission

Membership and package commissions use the per-employee rates set on the employee profile. These do not have dedicated plan types but are tracked through the employee-level membership and package commission percentage fields.

Membership commission is calculated on the membership sale amount attributed to the employee. Package commission is attributed at the time of package sale, not at the time of individual service redemption within the package β€” the selling employee receives the commission regardless of which employee subsequently performs the services included in the package.

Cancellation and no-show scaling

Configure scaling factors that adjust commission when appointments are cancelled or result in a no-show:

Setting Description Default
Cancellation commission scaling factor Multiplier applied to the commission amount for cancelled appointments (for example, 0.5 for half commission, 0.0 for no commission) 0.0
No-show commission scaling factor Multiplier applied to the commission amount for no-show appointments 0.0

Both factors range from 0.0 (no commission paid) to 1.0 (full commission paid as if the service were completed). New employee records default to 0.0 for both factors β€” no commission is paid for cancelled or no-show appointments unless explicitly configured otherwise.

The two factors can be set independently. For example, an organization might pay 50% commission on cancellations (factor = 0.5) but no commission on no-shows (factor = 0.0).

These factors are set per employee on the employee profile.

Commission deductions

Commission deductions reduce the employee's commission payout. Deductions are applied after commission computation β€” the gross commission amount is calculated first, and then applicable deductions are subtracted to arrive at the net commission payable to the employee.

Multiple concurrent deductions can be active for the same employee. All applicable deductions are applied cumulatively.

Commission slabs and deductions β€” slab matching order:

The "Match commission slabs before deductions to calculate commissions" toggle controls whether commission slabs are matched before or after deductions are applied:

Important: Check how this toggle is set before you reconcile a commission figure β€” it decides which revenue total is used to pick the slab.

  • Toggle ON β€” slabs are matched BEFORE deductions (the employee's gross revenue is used to determine which slab applies, then deductions reduce the payout within that bracket)
  • Toggle OFF (default) β€” slabs are matched AFTER deductions (the deduction-reduced net revenue is used to determine which slab applies)

Invoice deduction scope:

The "Apply invoice level deduction on" setting controls which invoices are included in the deduction calculation:

Setting Behavior
All item types Deductions apply to all invoices, regardless of what items they contain
Services only Deductions apply only to invoices that include at least one service line item; invoices composed exclusively of products, memberships, or packages are excluded

To add a commission deduction:

  1. Open the employee profile and navigate to the Commissions tab.
  2. In the Commission deductions section, click Add Commission deductions.
  3. Select the Deduction type (Flat or Percentage) and enter the amount.
  4. Set the effective date range for the deduction.
  5. Click Save.

To remove a deduction, select it and delete it. Deletion is a soft delete β€” the record is preserved for audit purposes but excluded from future commission calculations.

Retail sale commission incentive

The retail sale commission incentive rewards employees who drive product sales alongside service revenue. It can be configured at both the employee level and the job level.

Configure at the employee level:

  1. Open the employee profile and navigate to the Commissions tab.

  2. Locate the Define product revenue threshold and service commission incentive section.

  3. Configure the fields:

    Field Description
    Product revenue threshold for service commission incentive The minimum product revenue the employee must achieve within the pay period to qualify for the incentive
    Service commission incentive The additional service commission percentage awarded when the product threshold is met
    Product revenue multiple (beyond threshold amount) for additional service commission incentive An optional multiplier that defines an additional incentive tier for revenue exceeding the threshold at a higher multiple
  4. Save.

Configure at the job level:

  1. Navigate to Employee > Jobs.
  2. Open the job designation.
  3. Configure the same retail sale commission incentive fields in the commission section.
  4. Save.

Job-level incentive settings apply to all employees assigned that job, unless overridden at the employee level. To use job-level incentive settings, set Use Job Comm Incentives to the job configuration option on the employee profile.

Worked example: retail sale commission incentive

A center wants to award an extra 5% service commission to any employee who sells more than $500 in products in a pay period. The administrator sets:

  • Product revenue threshold for service commission incentive: $500
  • Service commission incentive: 5%

An employee who sells $600 in products earns their standard service commission plus an additional 5% on service revenue for that pay period.

Tenure-based commissions

Tenure-based commission adjusts the commission rate based on how long an employee has been with the organization. Longer-tenure employees can earn higher commission rates as a retention incentive. For configuration details, see Tenure commissions.

Invoice-level commission adjustments

Managers can adjust commission amounts at the invoice level for specific transactions. These adjustments are applied after the standard commission calculation and are recorded with an audit trail including the adjusting user, the original commission amount, the adjusted commission amount, and the timestamp.

Important: Invoice-level commission overrides are not versioned. If payroll is recalculated for a past period, Zenoti uses the latest override value, not the historical value at the time of the original calculation. Employee-level and job-level slab configurations are versioned and retain historical values.

The total adjusted commission for all employees on an invoice cannot exceed the invoice total. If the sum of adjusted commissions exceeds the invoice total, Zenoti rejects the adjustment and returns a validation error.

ROP (Rate of Production) commission

The ROP (Rate of Production) commission model enables commission calculation at the point of sale rather than deferring to the payroll batch cycle. When the job-level Enable ROP (Rate of Production) commission flag is enabled, it propagates to all employees assigned that job.

When ROP is active for an employee:

  • Commission is computed immediately upon invoice close.
  • The ROP commission amount is displayed on the invoice receipt.
  • Authorized users can override the computed ROP commission at the invoice level before the invoice is finalized.
  • ROP-generated commission records are flagged separately from payroll-cycle-computed records, enabling accurate reconciliation between real-time and batch commission calculations.

ROP commission can be configured with separate service revenue thresholds and product revenue thresholds at both the job level and the employee level.

Commission on loyalty point redemptions

Commission on a service paid with loyalty points requires two independent conditions to both be true:

  1. The organization setting Calculate commission on point redemption amount as a Free Service must be enabled.
  2. Free-service revenue slabs must exist at the job level.

If either condition is missing, the provider earns no commission on the loyalty-point-paid service and no error is displayed. Confirm both conditions are in place before expecting commission to accrue on loyalty redemptions.

What free-service revenue is. Free-service revenue is a separate revenue bucket from paid service revenue. It collects the revenue the organization has chosen to treat as free β€” including redemptions of gift cards and prepaid cards priced at zero, Manual discounts, and Referral discounts, where those options are selected under the free service revenue settings at Configuration > Employee > Payroll and commissions > Commissions. Enabling Calculate commission on point redemption amount as a Free Service adds the loyalty point redemption amount to this same bucket. Because the bucket is separate from paid service revenue, it is matched against free-service revenue slabs β€” which is why those slabs must exist at the job level for the provider to earn anything.

Commission on free services

A configurable setting determines whether free services generate commission for the performing employee. When enabled, free service revenue is included in the commission calculation base. When disabled, free services are excluded from commission computation entirely.

This setting applies consistently across all commission calculation paths: plan-based slab evaluation, per-employee percentage calculation, and ROP computation.

The Free service commission options at Configuration > Employee > Payroll and commissions > Commissions control how that revenue is treated:

  • Use free service commission slabs β€” match free service revenue against its own slabs.
  • Include free service revenue in paid service revenue β€” add free service revenue to paid service revenue before slabs are matched.
  • Apply the highest paid service revenue commission on free services revenue β€” pay free service revenue at the highest rate the employee reached on paid service revenue.

The Free Services row in Defined Commissions by Category on the employee's Commissions tab sets the employee-level rate for this revenue.

Center commissions and redo penalties

Center commissions are flat bonus amounts awarded to all employees at a center during a strong financial period. These amounts are included in commission reports and payroll calculations.

Redo penalties apply when a guest requests a redo of a service. The original provider's commission is deducted as a redo penalty, and the commission is awarded to the second provider who performs the redo service. The Allow Redo Penalty For Every Redo setting controls whether redo penalties apply for every redo appointment or only under specific configured conditions.

Tips

  • Use the Cumulative commission model when you want to reward incremental revenue at each tier. Use the Highest Qualified model when you want a single rate to apply to all revenue once a threshold is reached.
  • Set the cancellation and no-show scaling factors explicitly for every employee. Both default to 0.0 (no commission), which may not match your organization's policy.
  • When configuring a new commission plan, set an explicit end date only if the plan is temporary. Leave the end date blank for ongoing plans to avoid the plan expiring mid-pay-period.
  • Confirm with your payroll administrator which way the slab matching toggle (Match commission slabs before deductions to calculate commissions) should be set before enabling it β€” it changes which revenue total picks the slab.
  • Item-level commission overrides are not versioned. If you need accurate retroactive payroll recalculation, avoid using item-level overrides for items that may be recalculated in past periods.
  • After changing any commission configuration, recalculate each pay period that contains the affected invoices' close dates. Nothing recalculates on its own, and a locked period cannot be recalculated at all.

Troubleshooting

An employee's commission is lower than expected. Check the payroll report service-revenue column first β€” it is already net of shop cost. Deducting shop cost again produces a lower figure than intended. Confirm the revenue basis setting (pre-discount vs. post-discount) and verify which slab model (highest qualified vs. cumulative) is active.

An employee was paid a flat amount where you expected a percentage, or the reverse. Per-item commission entries have no type selector β€” the value itself decides. 15% pays 15 percent of the item's commissionable revenue; 15 pays a flat 15 per unit sold. Open the item on the employee's Services, Products, Memberships, or Packages tab, confirm the "%" is present, appears once, and comes last, then recalculate the affected pay periods.

A commission change did not show up in payroll. Commission already calculated for a pay period does not change on its own. Recalculate the pay period that contains the affected invoices' close date, not their service or sale date. If the period is locked or payroll processing has started for that center, recalculation is unavailable.

Commission is not accruing on loyalty-point-paid services. Two conditions must both be true: the Calculate commission on point redemption amount as a Free Service organization setting must be enabled, and free-service revenue slabs must exist at the job level. If either is missing, no commission accrues and no error is shown.

The commission plan is not applying to an employee. Verify that the plan's effective date range encompasses the current pay period. Expired plans remain visible in the listing but do not influence active commission calculations. Also confirm the plan is assigned to the employee on the Commissions tab of the employee profile.

The slab matching toggle is producing unexpected results. With Match commission slabs before deductions to calculate commissions ON, slabs are matched before deductions, so gross revenue determines the slab. With it OFF (the default), slabs are matched after deductions, so net revenue determines the slab. Confirm which mode is active and recalculate manually to verify.

A commission rule and a service assignment are in conflict. When a commission rule and a service assignment disagree, Zenoti displays a warning dialog. The dialog identifies which configuration takes effect. The commission resolution hierarchy (item-level > employee-level > job-level) determines the outcome β€” the highest-priority configuration applies.

Was this article helpful?
Your feedback helps us improve our documentation.