ZenotiHelp

Manage employee payroll

ZTZenoti Docs Team Updated September 19, 2026 9 min readGuide

Payroll processing in Zenoti handles salary, hourly rates, overtime, and commission calculations for each pay period. Payroll can be generated at the center, zone, or organization level. This article covers pay period configuration, payroll generation, salary and rate settings, overtime, payroll locking, and payroll reports.


On this page:



On this page


Before you begin

  • Pay periods must be configured for each center before payroll can be generated.
  • Employee salary and hourly rate settings must be set on the employee profile.
  • For commission-based payroll, commission plans must be configured. See Configure employee commissions.

Permission: Payroll (under View Employee Reports) β€” Required to open Employee > Payroll (the Employee Payroll report page) and view payroll data. Grant it on the View Employee Reports row in the Employee Manager section of the security role (Configuration > Security > Security roles > the role > Permissions).

Permission: You need permission to generate and modify payroll. Contact your Zenoti administrator if you cannot perform these actions.

Configure pay periods

Pay periods define the time intervals for payroll processing. Each center has its own pay period configuration, and centers within the same organization can operate on different pay cycles independently.

Set up a pay period

  1. Navigate to Configuration > Employee > Pay period.

  2. Select the target center from the center dropdown.

  3. Select the pay period frequency from the Pay Frequency dropdown:

    Frequency Description
    Weekly Pay period of 7 days
    Bi-weekly Pay period of 14 days
    Semi-monthly Two pay periods per month (typically 1st–15th and 16th–end)
    Monthly One pay period per calendar month
  4. Set the pay period start date. For monthly pay periods, use the Start Date (Monthly) field to specify the day of the month on which the period begins.

  5. Click Save.

Note: By default, pay periods cannot overlap. When the Allow overlapping pay periods setting is active, overlapping periods are permitted.

How employees are included in a pay period

Whether an employee appears in a given pay period is determined by an overlap test between their employment dates and the period, evaluated when the period is generated:

  • An employee whose start date falls after the pay period end date is excluded from that period and included in the next.
  • An employee with no last (end) date on record is always included.

If an employee is unexpectedly absent from a pay period, verify their employment dates on the employee profile before assuming a data issue.

Fixed salary and leave accrual in partial periods

  • Fixed salary is not prorated for a partial pay period. An employee who works only part of a period receives their full configured salary for that period.
  • Leave accrual is prorated for a partial period. Leave balances are calculated proportionally based on the days worked within the period.

Bulk pay period generation limits

When generating pay periods in bulk, Zenoti enforces a three-year forward limit. If you attempt to generate periods beyond three years in advance, the system rejects the request with a message indicating the range exceeds the allowed limit. To generate periods covering more than three years, generate them in three-year blocks sequentially.

Salary and hourly rate settings

Configure compensation details on each employee profile:

Setting Description
Salary The employee's fixed salary amount per pay period
Hourly rate The employee's hourly pay rate
Holiday pay rate Pay rate applied for hours worked on holidays
Vacation pay rate Pay rate applied for vacation hours
Additional pay rate Supplementary pay rate for special circumstances
Include in payroll Whether this employee is included in payroll processing

To configure:

  1. Open the employee profile.
  2. Navigate to the Payrates tab.
  3. Set the salary, hourly rate, and related fields.
  4. Click Save.

Important: When Include in payroll is set to off for an employee, that employee is excluded from all payroll generation regardless of their salary, hourly rate, or overtime configuration. Their compensation settings are retained but not used until the flag is re-enabled.

Overtime configuration

Overtime settings control how extra hours are compensated:

Setting Description
Overtime above hours Weekly hour threshold above which overtime applies
Overtime multiplier Pay rate factor for overtime hours (for example, 1.5x)
Overtime type Standard (daily) computation method

For advanced multi-tier overtime, see Configure overtime detection.

The working hours calculation method (from scheduled shifts vs. actual attendance records) is controlled by the Calculate Working Hours in Payroll Based On center-level setting.

Payout model options

Model Description
Standard Salary, hourly pay, and commission are all active and added together
Max-of-hourly-or-commission The system pays the higher of hourly pay or commission earnings

The max-of model requires the center-level Max of Hourly Pay or Service Commission setting to be active.

Generate center payroll

  1. Navigate to Employee > Payroll. The Employee Payroll report opens for the current pay period.
  2. Set Cycles, Month, and Year.
  3. Click Refresh.
  4. If Zenoti reports that "Employee commissions are either not calculated or data does not exist for this payroll period," click Calculate commissions now. Where commissions were already calculated and you need to redo them, click Recalculate commissions now.
  5. Review the payroll data. Zenoti calculates salary, hourly pay (based on worked hours), overtime pay, commission earnings, tip allocations, and deductions for each employee.

Note: The Cycle filter follows the pay periods configured for the center, not the calendar. A report that appears to stop short of a full calendar month is showing the configured pay period boundary, not a data gap.

Use the view selector beside the report name to switch between:

View Contents
Summary One row per employee, with total hours, hourly rate, total hourly pay, service hours, commission, and deductions.
Details One row per transaction, with invoice number, service date, closed date, guest, and item.

Select the Employee Wise Details icon on an employee's row to drill into that employee's figures. Use the export icon to download the report, and the column-picker icon to choose which columns appear.

Generate organization payroll

When the Enable Manual Organization Payroll Calculation setting is active:

  1. Navigate to the organization-level payroll page.
  2. Select the pay period.
  3. Click Generate Organization Payroll.

Note: The system processes payroll across all centers in the organization.

Zone-level payroll is available when the Enable Zone Level Payroll setting is active, processing payroll for all centers within a zone.

Payroll controls

Payroll controls configure how the system calculates and compares employee pay. They are found at Configuration > Employee > Payroll and commissions > Payroll controls.

Setting Description
Calculation method Scheduled hours β€” payroll uses the employee's scheduled shift hours as the basis for calculation. Actual hours β€” payroll uses the hours recorded in attendance (check-in/check-out).
Compare Employee Pay Calculation Controls how the system compares hourly pay against commission pay: Service commission vs hourly β€” compares service commission earnings to the hourly rate and pays the higher; OR Service + product commission vs hourly β€” compares the combined service and product commission against the hourly rate and pays the higher.
Look-back period The number of previous pay periods (1, 2, or 3) used to calculate a weighted-average regular rate for overtime-exempt employees when no historical data is available for the current period.
Request Therapist Bonus When enabled, a bonus is awarded when a guest specifically requests the provider who performed their service.

Custom pay periods:

To configure a custom pay period frequency (if the standard weekly/bi-weekly/semi-monthly/monthly options do not fit your organization):

  1. Delete any existing default pay period assignments for the relevant center.
  2. Create a new pay period with a custom frequency in days and specific start/end dates.

Note: The Allow overlapping pay periods toggle, also on this page, allows two pay periods to overlap in time β€” useful when transitioning between pay period configurations.

Payroll locking

When the Lock Payroll setting is active, payroll data becomes immutable after a defined lock window:

  • The lock window is calculated as the pay period end date plus the configured Payroll Lock Days.
  • Once locked, attendance edits, commission adjustments, and manual payroll corrections for that period are rejected.
  • The locked status of a period is displayed on the payroll report and payroll settings pages. Locked periods are visually distinguished from open periods and show the lock effective date.
  • The Bypass Financial Lock for Check-In setting allows check-in operations to proceed even when the payroll period is locked, preventing operational disruption while maintaining payroll data integrity for finalized periods.

Payroll lock is an organization-level setting with center-level lock dates. It is not configurable at the employee level.

View payroll reports

Navigate to Reports > Employee and select the desired payroll report:

Report Description
Payroll Summary Summary of all payroll components by employee
Payroll by Payroll Plan Payroll data grouped by commission plan
Therapist Earnings Daily Daily earnings breakdown per provider

For detailed report documentation, see Employee Payroll Summary v2 Report.

Payroll plan association history

Zenoti tracks the history of commission plan associations for each employee. This history is used for accurate payroll recalculation: when payroll is regenerated for a past period, the system uses the plan that was active during that period, not the current plan.

For details, see View payroll plan history.

Tips

  • Configure pay periods before the period starts. Pay period settings take effect from the start date you configure. Setting them up after a period has begun may result in incomplete payroll data for that period.
  • Use the Cycle filter to navigate pay periods. The Cycles selector on the payroll report follows your configured pay periods, not calendar months. If your pay period runs from the 16th to the 15th, the Cycle filter reflects those boundaries β€” select the correct cycle before reviewing or exporting data.
  • Verify employment dates when an employee is missing from payroll. An employee whose start date falls after the pay period end date is automatically excluded from that period. Check the employee profile's start date if a recently added employee does not appear in the expected pay period.
  • Generate pay periods in three-year blocks for long-range planning. Bulk pay period generation is limited to three years forward. If your organization plans further ahead, generate the first three years, then generate the next block after the initial set is saved.
  • Fixed salary is not prorated; leave accrual is. If an employee works only part of a pay period, their fixed salary is paid in full for that period. Leave accrual, however, is calculated proportionally. Keep this distinction in mind when reviewing payroll for employees who joined or left mid-period.

Troubleshooting

  • A center does not appear in payroll output and no error is shown. Pay periods are configured per center. A center with no pay period configured is absent from payroll output without generating an error message. Navigate to Configuration > Employee > Pay period, select the missing center from the center dropdown, and verify that a pay period has been saved. If no pay period exists, configure one and save before regenerating payroll.

  • The payroll report shows "Employee commissions are either not calculated or data does not exist for this period." This message appears when commission calculations have not been run for the selected pay period. Click Calculate commissions now to run them. If commissions were previously calculated and you need to update them after data changes, click Recalculate commissions now instead.

  • An employee is missing from the payroll report. Check two things: (1) Confirm the employee's Include in payroll flag is set to on in the Payrates tab of their profile. (2) Confirm the employee's employment start date falls within or before the selected pay period. Employees whose start date is after the pay period end date are excluded from that period automatically.

  • Payroll data cannot be edited for a past period. The pay period is locked. The lock takes effect after the number of days specified by Payroll Lock Days has elapsed since the period end date. Locked periods are visually distinguished on the payroll report and settings pages, and show the lock effective date. If you need to make a correction, contact your Zenoti administrator to review the lock configuration.

  • Bulk pay period generation was rejected. Zenoti enforces a three-year forward limit on bulk pay period generation. If your requested range exceeds three years, split the generation into three-year blocks and generate each block separately.

Was this article helpful?
Your feedback helps us improve our documentation.